Airwolf 3D NW3D HDX 3-D Printer Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm Maximum print width: 203 dpi – 104 mm, 300 dpi – 106 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 109 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 295 x 272 x 477 mm Weight: 12.4 kg

3D Systems Monochrome ProJet 360 3D Printer Floor Standing w/ Consumables Lab This item was removed  (more)from a university where it was surplus to requirement. It is in good cosmetic condition and powers on. The previous client has stated it was fully functional when last used. The table shown in the second image is not included. Also included: - 2 x 1 litre Visijet PXL Clear order No. 360434 - 1 x 7kg tub of ZP131 printing media powder - 1 x Litre 3D Systems ZB 60 clear binder solution - 1 x Data lead - 1 x Small grease gun - 1 x 49g tube of multi-purpose grease - 1 x 59ml bottle of 3D systems cleaning solution Part 360 444 - 5 x Small cleaning brushes - 2 x Hand scrapers

Dust-free cabinet is applicable as means of protecting the printers against operation in heavily dus (more)ted areas. The airtight shield made of stainless steel protects a printer against defects, and allows for operation in not adapted places.

Universal USB A-B cable. Standard cable length: 1,8 m.

RS 232 cable: scale (terminal PUE C/41H, PUE HY, PUE 5) - Epson printer. Cable length: 5 m Optional  (more)cable length: 2 m, 10 m. Compatible with: Scales with PUE C41H terminal Scales with PUE HY terminal Scales with PUE 5.15 (PUE 5.19) terminal Terminal PUE C41H Terminal PUE 5.15 (PUE 5.19) Terminal PUE HY

STP - ECO-SUSTAINABLE STABILITY Being able to both heat and cool, STP incubators are perfect for the (more) stable and safe incubation of samples, in any working environment. The STP series maintains a constant temperature from 3°C to 70°C with excellent precision. Attention! Peltier technology is not capable of refrigerating less than 15°C below room temperature. The STP 4 incubator, 250 litres, is also equipped with a large touch display, LED lighting, alarms, lock, simple and comfortable design, which will make the use of these incubators child's play; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. WHICH VERSION? THE TWO VERSIONS OF THE ST MODEL The two models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The STP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - External structure in powder-coated sheet metal with graphite front panel, or completely in stainless steel - Insulated door with lock - Protection class 2.0. - Safety class 3.3 (DIN 12880) optional - Stainless steel shelves - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side Peltier technology. Simple, clean and efficient, the Peltier cell refrigeration system is a modern and versatile technology used in various refrigeration or heating instruments. Compared to compressors, they are less powerful, but allow particular applications where a vibration-free environment and minimal temperature variations are required. Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation - excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space - the Peltier cooling system reduces the overall size of the instrument and its weight. Ecological - Peltier technology is simple and does not use substances harmful to the environment.

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Heidolph Hei-VAP Core HL/G5B Coated Hand Lift w/ G5 Dry Ice CondenserThe Hei-VAP Series of rotary ev (more)aporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G5B Coated Hand Lift w/ G5 Dry Ice Condenser includes: - Heating Bath - Control Panel - G5B Dry Ice Condenser - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm Features: - Recommended for standard  (more)applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 1.6-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute Click Here to View Product Video INCLUDED: The Heidolph 036150430 Single-Channel Pump Head SP Standard, 1.6mm includes: - 3 Year Manufacturer's Warranty

Accuris P7700-200 NextPette Variable Volume Pipette, 20 to 200ul Inaccuracy ± 1.2 to 0.6% Imprecisio (more)n ± 1.0 to 0.6% Compatible Tip Size 200ul Features - Market leading accuracy & precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-200 NextPette Variable Volume Pipette, 20 to 200ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty