Hewlett Packard HP 6890 GC Gas Chromatograph with Injector Lab

This listing is for a Eppendorf epMotion 5075 Liquid Handling System.The unit is in full working con (more)dition and is ready for immediate release.This Unit is supplied with PC and accessories.The Eppendorf epMotion 5075 is a sophisticated solution for automating liquid handling tasks, designed to enhance efficiency and accuracy in laboratory settings. Here’s a detailed look at its key features and specifications:Key Features:Accelerated Operational Speed: The epMotion 5075 significantly reduces the time spent on manual pipetting, allowing for faster throughput in critical experiments.Versatile Worktable: With up to 12 deck positions, the system adapts seamlessly to various liquid handling applications, whether you’re doing PCR setup, cell culture, or reagent transfers.User-Friendly Software: Utilizing Eppendorf’s epBlue™ software, the system simplifies the programming of liquid handling tasks. The intuitive software assistant concept means that users can quickly learn to operate the system with only minimal training.Enhanced Decontamination Standards:CleanCap Option: Features UV light decontamination and a HEPA filter for purified air, ensuring high standards of sample safety and contamination control.Optical Sensor Technology: An integrated optical sensor checks labware, liquid levels, and tip counts at the beginning of each cycle, minimizing errors and enhancing reliability throughout operations.Technical Specifications:Model: epMotion® 5075Catalog Number: 5057 SeriesDimensions: 107 x 61 x 67 cm (43 x 24 x 27 in)Electrical Requirements: 110 - 130 V, 50/60 HzType: Automated pipetting and liquid handling systemDeck Capacity: Up to 12 positionsAccuracy:At 1 µL: ±15% or ±5%At 50 µL: ±1.2% or ±0.4%At 1,000 µL: ±0.7% or ±0.15%

ACCELA pump and autosampler for HPLC THERMO SCIENTIFIC ACCELA pump that does not start ACCELA autosa (more)mpler not tested To be considered for parts

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This system was removed from a university lab as surplus to requirements. The lab reported: "Hasn’t  (more)been used for a few years. I am told it was working fine last time. " Genomic Solutions Cartesian Dispensing System ,Honeybee SD 8+1 Active. Model 6PCSDBXL-00. The system in the perspex enclosure was in good working order prior to it being disconnected. There is also included a spare unit which the university was using to provide spare parts. There are eight tube rails each holding 24 tubes. There are two Dell GX520 PC's that both have Microsoft XP pro installed and the software for the honeybee installed. There are no personal data on either of the units and all passwords and usernames have been changed on both. A HP 1702 monitor, usb keyboard and mouse are also included. It also comes with instruction books and a CD-Rom of software with Cartesian AXSYS V81.6.2. Included are the following; Model Honeybee 8+1 Active (complete)Serial No. H2755 Model Honeybee 8+1 Passive (incomplete)Serial No. HSD2756 2 x Dell Optiplex GX520 PCs running Windows XP ProfessionalSerial Nos. JQBJOB1. BBVD891 HP 1702 17" monitor Serial No. CNN407072Y Dell keyboard RT7D50 Serial No. CN-OW7658-37172-58O-08FI Passed a PAT test on 10.06.24The Honeybee unit powered on with power indicator lights showing on the main panel and injection head.A small vacuum pump powered on and generated suction.The first PC powered on but would not boot up properly, the second booted up and loaded windows and showed the software icons.When the icons were selected attempts were made to communicate with the Honeybee hardware but were not successful.The com cables reconnected into different ports but the data link could not be made. Software:Genomic Solutions AxSys Ver 81.6.2 November 2005 Manuals:3 x Genomic Solutions Training Guide V4 May 20061 x Genomic Systems Cartesian Honeybee Bench-top Protein Crystallisation System Operating Manual Version 1.0 January 2003 Included:8 x 24 position tube holders1 x barcode reader1 x small vacuum pump1 x Dell mouse5 x data cables

This Thermo Finnigan Trace GC System was removed from a university laboratory where it was surplus t (more)o requirements. All the units are in good, used cosmetic condition, and all power up. We were unable to test them further than this, however. The system comes supplied without a detector. The ECD one that was inside has been retained by the lab. The system consists of: 1 x Finnigan Trace GC Ultra With TriPlus AS Autosampler.1 x Thermo TP100 Sampler Supply It also comes with some spares and cables.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-27385 2 x Boxes of Long GlasswareITEM-27382 Black Container of mixed glasswareITEM-27383 Box of Mixed Small GlasswareITEM-26089 Incubator TraysITEM-40020 Unnamed Microplate Reader parts Spares/RepairsITEM-26088 Incubator TraysITEM-26087 Incubator TraysITEM-26086 Incubator TraysITEM-26090 Freezer rackingITEM-28308 Electrothermal Heating MantleITEM-28321 High pressure arc lampITEM-28311 Grant WaterbathITEM-28316 Biodine Fractional Horsepower GearmotorITEM-28312 Unknown plastic componentsITEM-28314 Mixed lab accessoriesITEM-28315 IKA-Werke Type: VX2ITEM-28313 Mass spectrophotometer tubesITEM-28320 Corning Incubator/OvenITEM-28317 Edwards Thermocouple 507ITEM-28309 Oertling GC121/00ITEM-28318 Medexxa HTC100ITEM-28303 Millipore Masterflex PumpITEM-28304 UVP Mineral LightITEM-28310 Unknown Metal ComponentsITEM-28305 FisherBrand PF-1502ITEM-28299 Bio-Rad Sub-Cell Model 192ITEM-30030 Brunel MicroscopeITEM-30036 Leybold Didactic MicroscopeITEM-30033 Motic MicroscopeITEM-27884 Vickers Instruments MicroscopeITEM-26017 IBM ThinkPad Docking StationITEM-05099 opticon bar code readerITEM-26082 Random PartsITEM-26079 Box of cables and pump partsITEM-25523 Grant Water BathITEM-13323 Smart Wireless U-RX UHF Radio Mic ReceiveR AV EquipemntITEM-27885 Vickers Instruments MicroscopeITEM-27886 Vickers Instruments MicroscopeITEM-27887 Vickers Instruments MicroscopeITEM-27888 Vickers Instruments MicroscopeITEM-27889 Vickers Instruments MicroscopeITEM-27904 Vickers Instruments MicroscopeITEM-27891 Vickers Instruments MicroscopeITEM-27905 Vickers Instruments MicroscopeITEM-27892 Vickers Instruments MicroscopeITEM-27893 Vickers Instruments MicroscopeITEM-27898 Vickers Instruments MicroscopeITEM-27895 Vickers Instruments MicroscopeITEM-26025 Kramer Tools VP-211 Automatic VGA/Audio SwitcherITEM-04659 Panasonic Telephone

Jenesco Pro-44 Ozone Generator The Jenesco Pro-44 Ozone Generator is designed for use in commercial  (more)applications or wherever high ozone output is needed to reduce odors, mold, mildew, bacteria and for decontamination. The Pro44 produces maximum ozone output from ambient air using four silicone composite ozone plates with stainless steel grids. The Pro44 has coverage up to 6,000 sq feet for odors, 1,000 sq feet for mold. Ozone output is 200 to 4000 mgph (milligrams per hour). 120V, 50W. 40W, 3A. Programmable timer from 15 minutes to 12 hours or hold for continuous operation. Made in the USA.INCLUDED: The Jenesco Pro-44 Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Jenesco Pro-4 Ozone Generator The Jenesco Pro-4 Ozone Generator is designed for use in commercial ap (more)plications or wherever high ozone output is needed to neutralize stubborn odors. The Pro-4 has a coverage area up to 3,500 sq feet for odors. Ozone output is 100-2100 mgph (milligrams per hour). 120V, 40W. Progammable timer from 15 minutes to 12 hours or can be run in continuous mode. Input filter ceramic plates can be easily cleaned for little maintenance. Made in the USA.INCLUDED: The Jenesco Pro-4 Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) Eppendorf F-45-30-11 Fixed Angle Ro (more)tor never used, new in opened box. Capacity of 30 x 1.5/2ml. The F-45-30-11 is used in the Eppendorf 5804, 5804R, 5810, and 5810R Benchtop Centrifuges. INCLUDED: The Eppendorf F-45-30-11 Fixed Angle Rotor for 5804/5810 (022637002) includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-45-30-11 Rotor SpecificationsMax Speed14,000 RPMMax RCF20,800 x gMax Capacity30 x 1.5/2 mL