All categories

This antivibration table is intended for mass comparators. It is made of stainless steel and a massi (more)ve granite plate placed on top. The table has a safety feature to prevent accidental slipping of the stone, as well as vibration dampening rubbers. Due to low construction, the need to lift large masses to a considerable height is reduced.

This antivibration table is intended for mass comparators. It is made of powder-coated steel and a m (more)assive granite plate placed on top. The table has a safety feature to prevent accidental slipping of the stone, as well as vibration dampening rubbers. Due to low construction, the need to lift large masses to a considerable height is reduced.

RW 5Y.F42 Robotic Weighing System is a mobile filter weighing station. Its important component is th (more)e multi-range robotic arm, which has a reach of 500 mm and a maximum capacity of 3 kg. The arm moves in several axes and has as many as six degrees of freedom, that is, it bends in six places. Incomparable Microbalance Readability RW 5Y.F42 is synonymous with full automation of filter weight measurement. The device is based on the XA 6.5Y.M.A Microbalance weighing mechanism, which provides incomparable repeatability and a readability [d] of 1 µg. The RW 5Y.F42 enables the weighing procedure and dust determination of up to 42 filters with a diameter of 47 mm. The Cobot’s Helping Hand A cobot working together with the balance takes samples from the magazine, identifies them with a 2D code reader, and then ionizes and weighs them. The use of a cobot equipped with a range of certified safety systems allows the robot to interact directly with laboratory personnel and minimize the space required for its work. Monitoring of ambient conditions records the current environmental circumstances, allows them to be viewed and data reported. What Do You Get When You Buy the RW 5Y.F42? XA 6.5Y.M.A Microbalance with a draft shield Cobot, which is a robot with a gripper that allows you to transport filters between the magazine and the microbalanc Magazine for storing filters (storage capacity: 42 cassettes) Ionizer Camera for casettes identification THB-S Sensor which monitors ambient conditions, mostly temperature, humidity and pressure 5Y weighing terminal for managing the operation of the device QR code reader built into the device PC with RMCS Filters software to manage the operation of the entire device. Ergonomics and Compatibility of RADWAG Products The 10-inch touchscreen display of the 5Y terminal guarantees readability of the result from many angles and comfort of use. The ergonomics of work is also enhanced by touch-free operation of the device. Thanks to the available communication interfaces, the RW 5Y.F42 will connect you to a spreadsheet (USB-C), to a smartphone or tablet (Hotspot), a printer (Ethernet, Wi-Fi, USB-A), a computer (Ethernet, Wi-Fi, USB-A), a barcode scanner (USB-A), as well as to a keyboard and mouse. What Do You Gain When You Buy the RW 5Y.F42? Fully automated weighing system for 47 mm diameter filters Compliance with EN 12341:2014 Time savings compared to the procedure of weighing filters manually Elimination of the human factor as a cause of measurement errors Process management with RMCS Filter software Automatic data recording as well as creating reports and statistics Identification of filters thanks to a system of QR codes applied to the casettes Elimination of the influence of electrostatics on the measurement Mobility of the system Ease of installation and operation.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x600 mm.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x400 mm (A x B).

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 500x500 mm.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 500x700 mm (A x B).

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 410x410 mm.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 400x500 mm (A x B).

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 300x250 mm (A x B).

RMCS system is a proprietary RADWAG software intended for support of calibration and testing procedu (more)res in a laboratory, from the moment of accepting an order, through its progress to calibration certificate issuing. The software manages the complete calibration and testing process. Mass comparators and software for network management of calibration process provide improved efficiency, reliable measurement results and complete calibration process documentation, plus lower labour costs. The system enables to initiate the calibration procedure by means of a task order sent to a mass comparator, and autonomously by the mass comparator itself. In both cases, the data is transferred to the software for the purpose of registering, controlling and finally issuing a calibration certificate. Mass comparators linked in the RMCS system autonomously communicate with THB modules recording ambient conditions (temperature, humidity, atmospheric pressure) throughout the whole control process. The modules are detachable from the mass comparators, this makes calibration of their sensors easy. Data on current ambient conditions is displayed in real time on mass comparator’s display. The data is also sent do RMCS software for control and archiving purposes. System modules: Ambient conditions monitoring module Installed, direct communicates with the mass comparator; Record of ambient conditions (temperature, humidity, atmospheric pressure) and air density calculation; Constant monitoring of ambient conditions in direct vicinity of the mass comparator and its weighing chamber; Graphic presentation of ambient conditions on mass comparator’s display. Weighing module Automatic and/or manual mass comparators as components of the RMCS system; Access to reference weights and test weights databases via RMCS software; Performance of calibration tasks ordered via the RMCS software; Self-test procedure determining mass comparator’s repeatability parameter; Transfer of measurement results to the software memory. Calculating and data storage module Sending tasks to mass comparators; Downloading mass and ambient conditions data from mass comparators; Operation on client databases / tasks / standards; Monitoring of calibration dates; Database of completed calibrations, documentation printing and archiving. Functions Complete management of a metrology laboratory calibrating mass standards and weights using RADWAG mass comparators of Y series; Calibration using ABBA and ABA methods; Network supervision over many PC workstations thanks to use of MS SQL database; Complete management of calibration orders; Extended database of reference weights and test weights; Extended database of clients, operators and users; Database of manual and automatic mass comparators; Database of calibration orders; Management of pending tasks based on issued calibration orders; Tasks and orders schedule; Not ordered weight test – quick check; Manual or automatic calibration of weights; Communication with automatic RADWAG mass comparators; Bilateral data synchronization with RADWAG mass comparators; Calibration process reports; Issuing calibration certificates according to pre-defined template; Export of report results to various file formats: PDF, MS Word, Excel; Record of events; Register of orders and calibration certificates; Archive files of calibration protocols, orders, calibration certificates and ambient conditions; Secured access to the software – log in procedure using password.

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 300×300 mm (A x B).

The RMCS Lite software is designed to operate RADWAG-manufactured mass comparators via a computer wo (more)rking in one and the same local network. The software allows for carrying out mass measurement in accordance with PN-EN 12341:2014 standard. The RMCS Lite enables: operating the mass comparator via remote screen operating directly on the mass comparator database editing mass comparator databases generating and editing reports exporting data to Excel file

The RMC 2.5Y.FC filter robot is a professional-class measuring device ensuring full automation of fi (more)lter mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and readability of d= 1 µg. The device enables weighing up to 156 filters. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. The air conditioning and humidification system ensures stable and fixed ambient conditions inside the chamber, which guarantees correct filters conditioning. Ambient conditions monitoring allows control of current chamber status, record and report of data. Advantages: Compliance with EN 12341:2014 standard Less time consuming when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement Hermetic robot chamber and the chamber for filter weighing Air conditioning system, HEPA filter Increased pressure in the chamber prevents contamination The RMC 2.5Y.FC filter robot comprises: a six-position reference magazine for storing mass standards and reference filters; a robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; a microbalance with a draft shield; an ionizing system; an air conditioning system with HEPA filter for cleaning the air in the vicinity of the robot chamber; ambient conditions monitoring (temperature, humidity, pressure); a weighing indicator for managing of the device operation; an integrated QR code reader; a QR code printer; a PC with the RMCS Filter software for managing the device operation; a control and adjustment systems; an external air conditioning unit.

The RMC 2.5Y.F filter robot is a professional-class measuring device ensuring full automation of fil (more)ter mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and readability of d= 1 µg. The device enables weighing up to 156 filters. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. Ambient conditions monitoring allows control of current chamber status and report of data. Advantages: Compliance with EN 12341:2014 standard Less time consuming when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement The RMC 2.5Y.F filter robot comprises: a six-position reference magazine for storing mass standards and reference filters; a robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; a microbalance with a draft shield; an ionizing system; ambient conditions monitoring (temperature, humidity, pressure); a weighing indicator for managing of the device operation; an integrated QR code reader; a QR code printer; a PC with the RMCS Filter software for managing the device operation.

RMCM-5 robotic mass comparator guarantees the utmost repeatability within 1 mg - 5 g range with the  (more)readability of 0.1 µg. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The RMCM-5 mass comparator comes standard with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in three locations. The characteristic feature of the RMCM-5 is high readability of pressure, 0.001 hPa, humidity, 0.01 %, and temperature, 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. A Mass Comparator and a Robotic Transport System in One Compact Device This combination results with: reduction of air drafts and vibrations from a robotic system in the course of comparison, minimised risk of human error, easier maintaining of stable environmental conditions inside the weighing chamber (thanks to a compact device dimensions). Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process. Remote, real-time preview of comparison process in real time is possible thanks to a video camera. Universal magazine insert shape Mass standard magazine features 120 positions. The RMCM-5 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert.

RMCM-10 robotic mass comparator guarantees the utmost repeatability within 1 mg - 10 g range with th (more)e readability of 0.1 µg. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The RMCM-10 mass comparator comes standard with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in three locations. The characteristic feature of the RMCM-100 is high readability of pressure, 0.001 hPa, humidity, 0.01 %, and temperature, 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. A Mass Comparator and a Robotic Transport System in One Compact Device This combination results with: reduction of air drafts and vibrations from a robotic system in the course of comparison, minimised risk of human error, easier maintaining of stable environmental conditions inside the weighing chamber (thanks to a compact device dimensions). Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process. Remote, real-time preview of comparison process in real time is possible thanks to a video camera. Universal magazine insert shape Mass standard magazine features 120 positions. The RMCM-10 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert.

The new RMC 20000.5Y robotic mass comparator guarantees the utmost repeatability within 1 kg - 20 kg (more) range with the readability of 100 µg. Fully Automated Process of Robotic Comparison of Mass Standards Opening of the weighing chamber in the course of measurements generates air drafts and changes environmental conditions inside the chamber, this causes a great increase in dispersion. The new line of robotic mass comparators eliminates the above problem. It has been solved due to a combination of the robotic mass comparator features with the characteristics of the automatic machines. This innovative approach has improved comparison result repeatability by 100% in relation to standard solutions applied worldwide. A Robot and an Automatic Machine in One RMC 20000.5Y mass comparator combines features of robotic and automatic mass comparators. Thanks to such an innovative combination it is possible to: eliminate air drafts and ground vibrations, maintain stable environmental conditions inside the weighing chamber, prolong life cycle of the robotic system, shorten duration of mass standard comparison, reduce noise. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The new RMC 20000.5Y mass comparator has been equipped with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in four locations, among many in the weighing chamber and mass standard magazine. Thermo-hygro-barometers are highly precise devices measuring pressure with the readability of 0.001 hPa, humidity of 0.01 %, and temperature of 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. Universal Magazine Insert Design Mass standard magazine features 10 positions. The RMC 20000.5Y enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert. Remote, real-time preview of comparison process is possible thanks to a video camera. Transport Arm With use of the automatic mass comparator, the transport arm remains inactive in the course of comparison, this eliminates air drafts and vibrations, considerably shortens comparison, and reduces noise emission. The transport arm of the RMC 20000.5Y mass comparator is used only to transfer the mass standards, it is out of operation within the comparison process. Ejectable mass standards magazine For the user's convenience, the magazine slides out of the robot's footprint at the time of arming and allows weights to be applied very easily, then positions itself automatically when retracted. Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process.

The new RMC.10000.5Y robotic mass comparator guarantees the utmost repeatability within 1 kg - 10 kg (more) range with the readability of 0,01 mg. Fully Automated Process of Robotic Comparison of Mass Standards Opening of the weighing chamber in the course of measurements generates air drafts and changes environmental conditions inside the chamber, this causes a great increase in dispersion. The new line of robotic mass comparators eliminates the above problem. It has been solved due to a combination of the robotic mass comparator features with the characteristics of the automatic machines. This innovative approach has improved comparison result repeatability by 100% in relation to standard solutions applied worldwide. A Robot and an Automatic Machine in One RMC 10000.5Y mass comparator combines features of robotic and automatic mass comparators. Thanks to such an innovative combination it is possible to: eliminate air drafts and ground vibrations, maintain stable environmental conditions inside the weighing chamber, prolong life cycle of the robotic system, shorten duration of mass standard comparison, reduce noise. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The new RMC 10000.5Y mass comparator has been equipped with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in four locations, among many in the weighing chamber and mass standard magazine. Thermo-hygro-barometers are highly precise devices measuring pressure with the readability of 0.001 hPa, humidity of 0.01 %, and temperature of 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. Universal Magazine Insert Design Mass standard magazine features 10 positions. The RMC 10000.5Y enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert. Remote, real-time preview of comparison process is possible thanks to a video camera. Transport Arm With use of the automatic mass comparator, the transport arm remains inactive in the course of comparison, this eliminates air drafts and vibrations, considerably shortens comparison, and reduces noise emission. The transport arm of the RMC 10000.5Y mass comparator is used only to transfer the mass standards, it is out of operation within the comparison process. Ejectable mass standards magazine For the user's convenience, the magazine slides out of the robot's footprint at the time of arming and allows weights to be applied very easily, then positions itself automatically when retracted. Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process.

The new RMC.1000.5 robotic mass comparator guarantees the utmost repeatability within 10 g - 1 kg ra (more)nge with the readability of 1 µg. Fully Automated Process of Robotic Comparison of Mass Standards Opening of the weighing chamber in the course of measurements generates air drafts and changes environmental conditions inside the chamber, this causes a great increase in dispersion. The new line of robotic mass comparators eliminates the above problem. It has been solved due to a combination of the robotic mass comparator features with the characteristics of the automatic machines. This innovative approach has improved comparison result repeatability by 100% in relation to standard solutions applied worldwide. A Robot and an Automatic Machine in One RMC 1000.5 mass comparator combines features of robotic and automatic mass comparators. Thanks to such an innovative combination it is possible to: eliminate air drafts and ground vibrations, maintain stable environmental conditions inside the weighing chamber, prolong life cycle of the robotic system, shorten duration of mass standard comparison, reduce noise. Real-Time Measurement of Ambient Conditions The new RMC 1000.5 mass comparator has been equipped with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in four locations, among many in the weighing chamber and mass standard magazine. Thermo-hygro-barometers are highly precise devices measuring pressure with the readability of 0.001 hPa, humidity of 0.01 %, and temperature of 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. Universal Magazine Insert Design Mass standard magazine features 36 positions. The RMC 1000.5 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert. Remote, real-time preview of comparison process is possible thanks to a video camera. Transport Arm With use of the automatic mass comparator, the transport arm remains inactive in the course of comparison, this eliminates air drafts and vibrations, considerably shortens comparison, and reduces noise emission. The transport arm of the RMC 1000.5 mass comparator is used only to transfer the mass standards, it is out of operation within the comparison process. Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process.

RMCM-100 robotic mass comparator guarantees the utmost repeatability within 1 g - 100 g range with t (more)he readability of 0.1 µg. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The RMCM-100 mass comparator comes standard with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in three locations. The characteristic feature of the RMCM-100 is high readability of pressure, 0.001 hPa, humidity, 0.01 %, and temperature, 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. A Mass Comparator and a Robotic Transport System in One Compact Device This combination results with: reduction of air drafts and vibrations from a robotic system in the course of comparison, minimised risk of human error, easier maintaining of stable environmental conditions inside the weighing chamber (thanks to a compact device dimensions). Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process. Remote, real-time preview of comparison process in real time is possible thanks to a video camera. Universal magazine insert shape Mass standard magazine features 120 positions. The RMCM-100 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert.

The RB 2.5Y.F filter robot is a professional-class measuring device ensuring full automation of filt (more)er mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and redability of d= 1 µg. The device enables weighing up to 1020 filters with 47 mm diameter. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. The air conditioning and humidification system ensures stable and fixed ambient conditions inside the chamber, which guarantees correct filters conditioning. Ambient conditions monitoring allows control of current chamber status and report of data. Advantages: Fully automatic system for weighing filters with Ø 47 mm Compliance with EN 12341:2014 standard Conditioning and weighing of up to 1020 filters Additional reference magazine Less time consumed when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement Hermetic robot chamber and the chamber for filter weighing Air conditioning system, HEPA filter (version without air conditioning on request) Increased pressure in the chamber prevents contamination The RB 2.5Y.F filter robot comprises: Two magazines for filter storage and weighing. Each magazine consists of 34 discs with 15 filter positions. A six-position reference magazine for storing mass standards and reference filters. A robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; Microbalance with a draft shield; Ionizing system; An air conditioning system with HEPA filter for cleaning the air in the vicinity of the robot chamber; Ambient conditions monitoring (temperature, humidity, pressure); Weighing indicator for managing of the device operation; QR code reader integrated with the device; QR code printers; A PC with the RMCS Filters software for managing the device operation; Control and adjustment system; An external air conditioning unit.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.