All categories

This listing is for 1 of 11 . The unit is in full working condition and is ready for immidate reale (more)se.

This listing is for 1 of 2 Fisherbrand F2 Vortex Mixer

This listing is for a Labcold Blood Bank RDBB11601 Laboratory Refrigerator.The unit is in full worki (more)ng condition and is ready for immediate release..

This listing for a 1 of 2 BD Max PCR MachineBD MAX System is intended for in vitro diagnostic (IVD)  (more)use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR.The BD MAX System is capable of:Independent nucleic acid extraction and purification with built in extractor.PCR amplification using thermal cycling across 24 lanesReal time detection of products of amplificationIdentification of each Sample Buffer tube by external barcode readerWork List verification by internal barcode readerFluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysisQualitative, quantitative and melt sample analysisFeatures:Integrated and fully-automated extraction and thermocycling stepsProcesses and analyzes up to 24 specimens per runOn-board lysis and extraction with pre-filled reagent stripsReal-time PCR with two 24-lane microfluidic PCR readersDedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715Consistent results through standardized workflow and protocolsRapidly expanding menu and open-system options to help address emerging testing needsLess than one minute of hands on time per sampleElectrical Requirements100 to 240 V, 50/60 Hz, 10 A, 300 VA MaxDimensions:Weight250 lb.Depth28.5 in.Height 37 in.Width 29.7 in.

This listing is for a Adam Equipment Nimbus BalanceInnovative design enables a compact footprint, so (more) it occupies minimal space but retains a high level of performance. The Nimbus base is formed from a single piece of extruded aluminum, a material that provides superior temperature regulation. The single-piece construction offers greater stability, producing highly repeatable results. The weighing sensor in the Nimbus is crafted from a single block, and contains fewer parts than a traditional force motor balance. This optimized internal mechanism is fabricated using hardened materials, helping the Nimbus tolerate rigorous laboratory use. Efficiency in the mechanics, plus improved processing power of the electronics, leads to excellent performance.Capacity - 120gReadability - 0.0001gRepeatability - 0.0001gLinearity - 0.0003gMin Weight USP - 0.01gPan size - 90mm øWeighing Units - ct, custom unit, dwt, g, GN, mg, N, oz, oztStabilisation Time - 4Interface - RS-232/USBCalibration - Internal automatic calibrationDisplay - Backlit LCD with 20mm high digitsOperating Temperature - 15° to 35°C / 59° to 95°F

This listing is for a MX-S Vortex Mixer

This listing is for a LMS Cooled Incubator. The unit is in full working condition and is ready for  (more)immidate realese. Introducing the LMS Cooled Incubator, a state-of-the-art solution designed for reliable temperature control in various laboratory applications. With its robust construction and advanced features, this incubator is perfect for growth studies, tissue culture, enzymology, and sample storage. Key Features: Accurate Temperature Control: Operates within a temperature range of -10.0°C to +50.0°C, with a remarkable temperature variation of ±0.5°C under average workloads, ensuring consistent conditions for your samples. User-Friendly Digital Controls: Easy-to-read digital display and simple controls allow for effortless temperature adjustments and monitoring. Energy Efficiency: Equipped with an eco-friendly, energy-efficient control system and a hermetically sealed refrigeration system, this incubator minimizes energy consumption without compromising performance. Versatile Storage Options: The incubator features four white plastic-coated wire shelves, providing ample space for various vessels, with a shelf area of 545 x 418 mm. Technical Specifications: Capacity: 200 L Dimensions: 600 mm (W) x 1370 mm (H) x 285 mm (D) Weight: 61 kg Insulation: Foamed polyurethane for optimal thermal efficiency Voltage: 240 V, 50 Hz Certifications: ISO 9001:2008 compliant Benefits: Enhanced Stability: The P.I.D. heating and cooling system ensures a stable internal temperature, crucial for sensitive experiments. Safety Features: Includes a pre-set safety cutout and a door lock to protect your valuable samples. Customizable Options: A full range of factory-fitted optional extras is available, such as LED lighting, access portholes, alarm systems, and internal sockets for added convenience. The LMS Cooled Incubator is the ideal choice for laboratories seeking a dependable and efficient incubator that meets the rigorous demands of scientific research. Invest in precision and reliability for your experiments today!

This listing is for a Elmi Sky Line Shaker Thermostat . The unit is in full working condition and i (more)s ready for immidate realese. The Elmi Sky Line Shaker Series is a high-performance line of orbital and rocking shakers, engineered for non-stop operation in a wide range of medical, chemical, and biological laboratories. These units offer exceptional flexibility, making them adaptable to different applications with a variety of optional accessories and attachments. The shakers come in multiple sizes and loading capacities, ensuring they can meet the specific needs of any laboratory environment. Key Features: High-Performance Operation: Designed for continuous, reliable use, ensuring stable and consistent results across various lab applications. Orbital and Rocking Motion: Provides uniform, controlled mixing, ideal for biological samples, chemical reactions, and cell cultures. Flexible Design: Compatible with a range of optional accessories and attachments to support different experimental setups. Variety of Sizes and Capacities: Multiple models are available, offering varying loading capacities to suit specific laboratory requirements. Non-Stop Operation: Built for extended use, ensuring continuous mixing and agitation for time-sensitive processes.

This listing is for a Polytron PT1300D HomogeniserHandheld, volume range 0,1 to 250 ml. For dispersi (more)ng, homogenising, extractions, cell disruption, mixing, emulsifying, suspending.Volume H₂O - 0,1 - 250 mlSpeed range - 7000 - 30000 min⁻¹Speed display - DigitalMotor rating - 100WDimensions (W×D×H) - 40×45×210 mm

This listing is for a Mettler RS-P42 Printer. The unit is in full working condition and is ready fo (more)r immidate realese. The Mettler Toledo RS-P42 Printer is a compact and reliable dot matrix printer designed for use with Mettler Toledo balances and analytical instruments via an RS232C interface. It provides fast and efficient documentation of weighing results, including regular adjustments and specific application data. With a small footprint, it produces 5 cm wide printouts, making it easy to include results in lab journals. The RS-P42 is ideal for labs needing GLP, GMP, and ISO-compliant documentation. Key Features: Dot matrix printing (24 characters/line) Print speed: over 1 line per second RS232C connectivity for easy integration with balances Compact design for space-saving use in laboratories

This listing is for 1 of 2 Roche LC Carousel Centrifuge The LC Carousel Centrifuge 2.0 is an easy-to (more)-use centrifuge with a specially designed rotor that can hold one LightCycler® 2.0 Sample Carousel (for 20 µl or 100 µl capillaries) of the LightCycler® 2.0 Instrument.Type: Bentchtop centrifugeDimensions: 285 mm (H) x 315 mm (W) x 380 mm (D) (12 in W x 15 in D x 11 in H)Weight: 20.6 kg (45.4 lbs) without rotorCapacity: LightCyler® 2.0 Sample Carousel (20 μl or 100 μl) with 1 to 32 LightCycler® CapillariesOperating Time: Fixed program approximately 30 secondsSpeed: Max. 735 x gPower Source: AC 115-230 V, 50/60 Hz

This listing is for 1 of 4 DiaMed 12 SII ID-CentrifugesThe centrifuge of the brand Diamed type 12SII (more) is designed to separate different components in a sample. This centrifuge is suitable for centrifuging samples in up to 12 ID cards. The Diamed type 12SII has a wide range of applications, including research and routine laboratories in life sciences, industry, clinics and chemistry.

This listing is for a Thermo Electron Corporation CR 4i Refrigerated CentrifugeSpecifications Capaci (more)ty:Swing-out rotor: (4 x 750 mL) 3000 mLFixed angle rotor: (8 x100 mL) 800 mLMaximum load: 3.6 kgSpeed range: 500 to 7800 rpmRCF range: 20 to 9900 x gTemperature range: -9°C to 40°CDimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″)Weight: 106 kg (233 lbs)Electrical: 120V, 60 Hz

This listing is for a Stuart UC152 Hotplate StirrerGeneral purpose, reliable stirrer/hotplates with  (more)compact 150X150mm top plate. These units have microprocessor control of temperature allowing a calibrated scale to be printed around the control dial in °C. With a choice of robust aluminium or chemically resistant ceramic tops and advanced saftey features: Flashing 'hot' warning light to warm when top plate is too hot to touch. Spillproof design to deflect spills away from the controls abd the user. Independent saftey circuit to protect against overheating. Microprocessor control for accurate temperature setting. The 'hot' warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speeds up to 2000rpm and is capable of mixing large volumes (up to 15 litres). Model UC152 has a glass ceramic top which has excellent chemical resistance and allows high plate temperatures for faster heating. Max temp: 450°C

The Sartorius LA 230 S is a high-performance laboratory analytical balance designed for demanding ap (more)plications requiring precise and accurate weighing. With a weighing capacity of 230 grams and readability of 0.0001 grams (0.1 mg), this balance is ideal for research, pharmaceutical, and industrial labs where precision is crucial. The instrument is equipped with a monolithic weighing cell, offering excellent thermal stability and fast response times, ensuring reliable and reproducible results in a variety of conditions. The LA 230 S also features advanced functionalities such as ISO/GLP printing, ID input, and self-calibration capabilities, making it suitable for environments that require strict data management and compliance. Its compact design with a generous weighing chamber makes it both space-efficient and practical for handling samples and reagents. Key Features: Weighing Capacity: 230 grams Readability: 0.0001 grams (0.1 mg) Monolithic Weighing Cell: Ensures superior thermal stability and rapid response times, improving accuracy and productivity. Advanced Features: Includes ISO/GLP printing, ID input for traceability, and automatic self-calibration, allowing for precise measurements with minimal user intervention. Compact Design: With dimensions of 37 x 24 x 36 cm (WxHxD), the balance fits comfortably in most laboratory environments, featuring a weighing chamber height of 21.5 cm for ease of use with taller sample containers. Ease of Use: User-friendly interface with quick setup and clear data visualization. Weighing Range: 0 to 230 g Readability: 0.1 mg Repeatability: ≤±0.1 mg Linearity: ≤±0.2 mg Sensitivity Drift: Within ±10% Dimensions: 37 x 24 x 36 cm (WxHxD) Weighing Chamber Height: 21.5 cm

This listing is for a Erlab Captair Flex M321 Fume Cabinet. The unit is in full working condition a (more)nd is ready for immidate realese. Ensure the safety of your laboratory personnel with the Erlab Captair Flex M321 Fume Cabinet, a cutting-edge ductless fume hood designed to protect against hazardous chemical exposure. Engineered with Erlab’s advanced filtration technology, this fume cabinet is perfect for laboratories requiring high-efficiency filtration without the need for ductwork. Key Features: Modular Filtration Column: The Captair Flex M321 features a unique modular filtration system that combines HEPA or ULPA filters with high-performance activated carbon molecular filters, delivering unparalleled filtration quality for various chemical hazards. Smart Technology: Equipped with real-time monitoring capabilities, the fume cabinet provides notifications regarding hood operation and filter status, ensuring optimal performance and safety. Safety Standards Compliance: Meets AFNOR NFX 15 211/ANSI Z9.5-2012 filtration efficiency standards (class 1 and 2), guaranteeing reliable protection against solvents, acids, and formaldehyde. Technical Specifications: External Dimensions: 30”W x 24 3/8”D x 43 ¾” (min) to 50 5/8” (max)H Air Face Velocity: Adjustable between 0.4 to 0.6 m/s (79 fpm to 118 fpm) Filter Breakthrough Detection: Sensors monitor filter saturation, with a backup filter for added safety. Benefits: Flexible Placement: The ductless design eliminates the need for complex ductwork, allowing for easy installation and relocation within your laboratory. Enhanced Safety: Advanced filtration technology ensures superior protection for laboratory personnel, reducing the risk of inhalation exposure to harmful chemicals. Customizable Options: Tailor the filtration system to meet specific laboratory needs, ensuring optimal safety and efficiency for various applications. The Erlab Captair Flex M321 Fume Cabinet is your ideal solution for a safe and efficient laboratory environment. Experience the perfect combination of advanced technology, flexibility, and superior protection today!

This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condit (more)ion and is ready for immidate realese. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm

This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and i (more)s ready for immidate realese. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centers or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

This listing is for a KNF Laboport N 840.3 FT.18 Diaphragm Vacuum Pump.The unit is in full working c (more)ondition and is ready for immidate realese.Chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.100% oil-free displacement, so media cannot be contaminated by transfer, evacuation or compressionHigh resistance to vapours and condensatesChemically resistant, suitable for use with very aggressive and corrosive gases and vapoursMaintenance-free, environmentally friendly; the pumps use no water and so produce no contaminated waste waterApplication: Fluid aspiration, degassing, gel drying, rotary evaporation, centrifugal concentration, distillation.Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller and extends the service life of the diaphragm. All parts that come into contact with the media are comprised of chemically resistant fluorinated plastics.

This listig is for a Hettich Rotina 420 CentrifugeThe Hettich ROTINA 420/ ROTINA 420R is a high perf (more)ormance benchtop centrifuge for large volumes, yet not overly large in size. The new, compact, 2-liter bench top centrifuges are for high sample throughput as well as for high sample volumes.

This listing is for 1 of 3 2Mag Mix 1 XL Magnetic Stirrer. The unit is in full working condition an (more)d is ready for immidate realese. The 2Mag Mix 1 XL Magnetic Stirrer is an ultra-flat, high-performance magnetic stirrer ideal for laboratories requiring powerful stirring for volumes ranging from 100 mL to 40 liters. This versatile stirrer is equipped with a long-range magnetic field, designed to stir over long distances up to a maximum of 40 mm, making it perfect for use with heavy-walled glass vessels, round-bottom flasks, or double-walled containers. Built with a wash- and abrasion-resistant stainless steel housing, the unit is highly durable and easy to maintain, even in the most demanding lab environments. With a speed range of 60 to 2000 rpm, adjustable through feedback control, the stirrer provides precise control for delicate or robust stirring tasks. The 4-step power adjustment allows for energy-efficient operation, while the digital speed display ensures accurate readings. The soft start feature (with 4 steps) provides smooth acceleration, and the quick stop function brings the stirring action to a halt in under 2 seconds, ensuring safety and precision. The mixWatch monitoring system is included to oversee stirring bar performance, further enhancing the reliability of this device. Key Features: Stirring Capacity: Handles volumes from 500 mL up to 40 liters Speed Range: Adjustable from 60 to 2000 rpm with feedback control Power: 4-step adjustable power (5, 10, 15, 20 watts) Magnetic Field: Designed for long-range stirring, effective at distances up to 40 mm Quick Stop: Stops stirring action in under 2 seconds Digital Speed Display: Provides precise, real-time speed information Soft Start: 4-step gentle start to protect delicate samples mixWatch: Stirring bar monitoring system for increased reliability Durable Construction: Wash- and abrasion-resistant stainless steel housing ensures long-lasting performance Made in Germany: Ensuring high-quality standards and craftsmanship Specifications: Ambient Operating Temperature: -10°C to +50°C; up to 80% relative humidity (R.H.) Case Material: Stainless steel Protection Category: IP64 (dust-tight and splash-proof) Type: MIX 1 XL Rotation Speed: 60 to 2000 rpm Stirring Capacity: From 500 mL to 40,000 mL Dimensions: 225 x 280 x 35 mm (W x D x H) Power: 20 W (adjustable in 4 steps) Weight: 4.0 kg

This listing is for a VWR VMS-C10 S2 Magnetic Hotplate Stirrer. The unit is in full working conditi (more)on and is ready for immidate realese. Compact stirrers with a ceramic glass plate provide excellent chemical resistance. Units feature digital error code display, a ‘hot’ top indicator to warn users that surface is hot, a fixed safety circuit that shuts off the heater if temperature rises above 550 °C, and three operating modes to choose from (standard, safe and adjustment protection). Stirrers have a speed display scale and optional capability to connect directly to a PT1000 temperature sensor; when using this functionality, control accuracy in the medium is ±0,5 °C. Features: Exact temperature setting via digital potentiometer Simultaneous digital display of target and actual temperatures via LCD display Display of actual temperature value in medium with 0,1 °C resolution when using PT1000 temperature sensor Stirrer can be controlled using two microcontrollers Specifications: Model VMS-C10 Advanced Max. stirring capacity H₂O (l) 15 Speed range (min-1) 100 – 1500 Temperature range (°C) 50…500 Heat output (W) 1500 Power input/output (W) 15/1,5 Plate material Glass-ceramic Plate dimensions (mm) 260×260 W×D×H (mm) 300×415×105 Weight (kg) 6

This listing is for a Eppendorf 5702R Refrigerated Centrifuge The range of Eppendorf 5702 general p (more)urpose, low-speed centrifuges has been designed specifically to meet the needs of mid-throughput clinical research and cell culture laboratories. These centrifuges are very compact, so that they fit easily on the lab bench, as well as extremely quiet.

This listing is for 1 of 2 DiaMed 37 SI ID-IncubatorsThe ID incubator of the DiaMed type 37SI is ide (more)al for bringing different samples in ID cards to a temperature of 37 °C.

This listing is for a Genlab MINI/50/SS/F/VIS Incubator. The unit is in full working condition and  (more)is ready for immidate realese. Introducing the Genlab MINI/50/SS/F/VIS Incubator, a state-of-the-art solution engineered for precision and reliability in laboratory environments. This incubator is designed for a wide array of applications, including microbiology, cell culture, and biochemical research, making it an indispensable tool for scientists and researchers. Key Features: Stainless Steel Construction: The MINI/50/SS/F/VIS features a durable stainless steel interior, ensuring excellent resistance to corrosion and easy cleaning, which is crucial for maintaining hygiene in laboratory settings. Advanced Temperature Control: With a temperature range of 5°C to 70°C and an accuracy of ±0.25°C at 37°C, this incubator provides the stable environment needed for sensitive experiments and sample storage. Integrated Visual Display: The built-in visual display allows for real-time monitoring of temperature settings, ensuring that your samples are always in optimal conditions. User-Friendly Interface: An intuitive control panel makes setting and adjusting temperature levels straightforward, enhancing operational efficiency. Technical Specifications: Capacity: 50 liters, offering ample space for various laboratory samples. Dimensions: Compact design that fits seamlessly on laboratory benches. Power Supply: Designed for energy efficiency, helping to reduce operational costs. Benefits: Versatile Applications: Perfect for a range of laboratory processes, including enzyme reactions, bacterial culture, and sample preservation. Safety Features: Equipped with an over-temperature cut-out for added safety, protecting your valuable samples from potential damage. Easy Maintenance: Smooth surfaces and accessible design ensure that cleaning and maintenance are quick and efficient. The Genlab MINI/50/SS/F/VIS Incubator is the ideal choice for laboratories seeking a reliable, efficient, and versatile incubator. Enhance your research capabilities and ensure the integrity of your samples with this exceptional laboratory instrument today!

This listing is for a Stuart STR6 Platform Rocker. The unit is in full working condition and is rea (more)dy for immidate realese. This platform rocker is designed for gentle and controlled mixing of samples, making it suitable for various laboratory applications such as low-foaming agitation, DNA extractions, staining, and de-staining procedures. The non-slip mat ensures that flat-based vessels remain securely in place during mixing. The STR6 is supplied with a non-slip mat which holds flat based vessels securely in place during mixing.   Speed Range    10 - 70 Platform angle of tilt    1 - 7º    Platform dimensions    360 x 360 x 140mm Maximum load    5kg    Overall dimensions    360x360x140mm    Electrical supply    240V, 50Hz, 50W

This listing is for a Helmer IHB245 Blood Bank Refridgerator · i.Series™ models feature the i.Cente (more)r™ Integrated Monitoring System · Heavy-duty refrigeration system for maximum temperature uniformity and quick recovery · Bacteria-resistant powder coating · Undercounter and upright models

This listing is for a Brand New Harvest Right Large Pharmaceutical PRO Freeze Dryer sold through ULM (more)freezedryers.comWe are stock holders in UKPrice Before VAT - £5,950Harvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh.Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency.What’s IncludedLarge Pharma Freeze DryerPremier Vacuum PumpVacuum Pump OilOil FilterStainless Steel Trays (set of 8)Guide to Freeze Drying  Key Features & Benefits - The freeze dryer has built in intelligence. It automatically and perfectly manages the freeze drying process - The ideal vacuum pressure and drying temperature is maintained for each material—preserves freshness and potency - 10.25 square feet of tray space—nearly twice the capacity of Harvest Right’s standard Large freeze dryer - Shelf Unit Has shelves for 8 trays (each tray 228.6mm W x 520.7mm D x 19mm H) - 6 liters of ice capacity - Weight: 68KG  Warranty1 Year international warranty provided by Harvest Right.  Dimensions Overall product dimensions: 514.3mm W x 603.2mm D x 781mm H Perfect for a counter top, cart or table.  Power A dedicated 20 amp circuit is required.  Shipping Info - The large freeze dryer ships in one package with a total weight of 177KG - Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA)- One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H - If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts Maintenance Simply filter and replace oil. Takes one or two minutes.  Vacuum Pump Each vacuum pump has been factory tested to guarantee 25 microns (25,400 Microns = 1 Inch of Hg) or better, and listed CFM performance.  Vacuum Pump Technical Specifications Oil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil or JB Industries Black Gold Vacuum Pump Oil Only DC Motor Energy Efficient Voltage: Standard, 230v Dimensions: 414mm x 152.4 x 307.3 Weight: 14.5KG Noise: 52 decibels  Product Comparison Industrial Oil Pump vs Standard Oil Pump Oil Changes This new Industrial Pump rarely needs to have the oil changed or filtered. The pump has a gas ballast feature that makes it so water does not stay in the oil. Because of this, the oil in the pump will be pristine and clear, even after 30 or more batches. You simply won’t need to change the oil until you have run 25 to 40 batches. Whereas, the oil in the standard vacuum pump needs to be changed and filtered every 4 or 5 batches (when using the new 3/8 inch vacuum hose). Vacuum Pressure Under cold and hot conditions the Industrial Pump will pull a deeper vacuum than the Standard Pump. Under cold conditions the difference is .05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump. Whereas, under warm conditions the difference is much greater: .05 Pascal for the Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especially not affected by warm, ambient conditions. When temperatures rise, it will pull a vacuum far better than the Standard Pump. The Industrial Pump is just not affected by outside heat. It pulls the same deep vacuum even when it is in a warm environment. Noise The Industrial Pump is substantially quieter than the Standard Pump, 52 decibels versus 64 decibels. The Industrial Pump at 52 decibels is about the same as a refrigerator. Oil Mist Filter Both pumps come with an oil mist filter. However, the Industrial Pump’s oil mist filter allows for no oil spray at all and it will last much longer. Power Use The Industrial Pump uses less power than the Standard Pump (187 watts versus 218 watts). Amperage Under hot conditions at ultimate vacuum pressure the Standard Pump pulls 2.1 amps while the Industrial Pump only pulls 1.7 amps. Hence, the Industrial Pump is more efficient. Weight The Industrial Pump is easier to move around as it weighs 5 pounds less than the Standard Pump (32 lbs. versus 37 lbs.) Life The Industrial Pump is more durable and will last longer than the Standard Pump.

This listing is for a Waters Acquity H-Class UPLC. The unit is in full working condition and is rea (more)dy for immidate realese. Unit includes: TUV Detector Column Manager Sample Manager Binary Solvent manager Software and computer can be provided at extra cost. Unlock the full potential of your laboratory with the Waters Acquity H-Class UPLC System, a cutting-edge high-performance liquid chromatography (HPLC) solution designed for unparalleled flexibility and efficiency. This advanced system is engineered to deliver exceptional chromatographic separations, making it the ideal choice for pharmaceutical, biotechnology, food and beverage, and environmental applications. Key Features: Quaternary Solvent Blending: Seamlessly combine up to four solvents to optimize method development and enhance analytical workflows. Flow-Through-Needle Injector: Effortlessly transfer existing HPLC methods to UPLC, significantly reducing method development time and boosting throughput. Empower and MassLynx Software: Benefit from advanced data processing capabilities, including peak picking and integration, ensuring precise analysis and reporting. UNIFI Scientific Information System: Streamline data management for metabolomics, proteomics, and glycomics, facilitating comprehensive analysis. Benefits: Experience improved laboratory productivity as you transition to UPLC/UHPLC technology, reducing analysis time while increasing efficiency. Achieve enhanced resolution and sensitivity, allowing for more accurate analysis of complex samples. Simplify method development with advanced tools and software, accelerating the discovery of new methodologies. Applications: Whether you are conducting pharmaceutical research, analyzing food safety, or monitoring environmental pollutants, the Waters Acquity H-Class UPLC System delivers high sensitivity and resolution for all your analytical needs. Elevate your chromatography capabilities today and transform your laboratory's performance with this innovative system.