All categories

Dionex ICS-2000 Ion Chromatography System & AS40 Automated Sampler This was removed from a unive (more)rsity lab where it was surplus to requirements. The system has been professionally serviced and is in full working order. A full report is available on request. The system is in good cosmetic condition with minor marks. Included are; Dionex Ion Chromatography SystemModel - ICS-2000SN - 04050165 Dionex Automated SamplerModel - AS40-1SN - 04080222

Binder CB-S 170 CO2 Incubator Double Stack Lab This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. This unit has been professionally serviced and is in full working order. The service report is available on request.

Priorclave PS/QCS/SV100 Top Loading Autoclave This was removed from a university lab where it was s (more)urpus to requirements. The unit powers up but has only been partially tested as it requires a steam generator, which we do not have. It is in good cosmetic condition with minor marks.

Oxford Cryofree System This was removed from a university lab where it was surplus to requirements.  (more)The unit has not been fully tested. The system includes; 1x Oxford Intelligent Gas Handling System with Femto Power Thermometry unit:Part No. CSB1001The unit powers on. 1x Oxford Instruments Cyrofree CylinderProject No. 418726The unit is in good cosmetic condition.There are some light tape marks and some colour bleaching from general use. 1x Trivac Pump:Type D65B3 Phase 16A Plug1x/10-4The unit powers on and is in good cosmetic condition. 6 x Cylindrical Vessels:Volume and Dims of Vessels: •4.5L (H62cm x W13.5cmx L13.5cm) •5.25L (H59cm x W12.5cm x L12.5cm) •2.25L (H33.5cm x W9.25cm x L9.25cm) •2L (H34cm x W9cm x L9cm) •11.5L (H75cmx W22cm x L22cm) • 4.5L (H72cmx W13.5cm x L13.5cm) 1x Metal flex Hose: 2x Metal 3x valve sealed Cylinders:

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)has not been tested further. It is in good cosmetic condition with minor marks.

Thermo Scientific Easy-nLC II Nano-flow Liquid Chromatography System This system was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Log-in information is available on request.

Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator Lab This item was removed from a universi (more)ty where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes the following: - Chemagic 96-rod head - Instruction manual - Dell Optiplex 3070 PC with Chemagic Software - Keyboard - Mouse - Touch-screen monitor - 18 x 96 well microplates/holders - 2 x Newland wired scanners with stands

Interscience Spiral easySpiral Pro Automatic Spiral Plater This was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and appears to run through test sequences. The item is in a reasonable, used cosmetic condition with marks from use.

Agilent 1260 Infinity Binary Pump  This item was removed from a university where it was surplus (more) to requirement. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks.

Wab Agitator Bead Mill Dyno Mill System Lab This system was removed from a university lab where it w (more)as surplus to requirement. All units are in good cosmetic condition and powered up, this was tested with our testing cable, but we are unable to test it further at our facility. Power cable not included. This system comprises the following: (The Mill) Elektromotorenwerk Brienz AG CH-3855 Brienz Suisse AK71M-2WKFModel - AK71M-2WKFS/N - 993060 STAHL-Fribos AG Cabinet No. - 07-1015Drawing No. - 232885WAB B Nr - 604618Fribos Ref - 1136629

Beckman Coulter Biomek NXP Lab Automated Workstation With PC, Software, Tips This was removed from a (more) university lab where it was surplus to requirements. The lab confirmed that although it was installed in 2011, it had never been used once and is essentially brand neIt is in good cosmetic condition with minor marks from use. The system includes: Biomek NXP WorkstationSerial No. A318410608 Beckman Coulter FX Device ControllerCat No. 719366Serial No. 00717635AM0718110002 Beckman Coulter AccuframeSerial No. 00717820AG0711110001 ThinkCentre PC with Windows 7Serial No. 1S5852BL2MJWLDN9 Software:Biomek System Install Disk v3.3Beckman Coulter Sami Workstation Software v4.0Beckman Coulter Recovery DVD MORBK29ABiomek Tutorials v3.3Accounts and Permissions v3.1 Additional parts/Accessories:2 x Manuals Biomek NX and NXP v3.3 Tutorial1 x Active Curtain test rodBeckman Coulter P200 pipette tips 340 racks (96 tips/rack) in sealed boxes1 x Roylan Developments StoragePod Dundee serial No. 000224 15 x 14 x 40cm1 x complete front polycarbonate safety screen kit with all parts and fixings10 x data leads120 x 96 well plates, chimney well TC with lids5 x workstation table fittings9 x microplate holders1 x pipette exchanger holder12 x ferrite cable noise reducers

Renishaw Raman Confocal System Parts Lab None of these items have been tested at our site - it is li (more)kely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. Included are the following; 1x Renishaw Raman unit 1x Renishaw SYS100 Unit:Model SYS100 1x Renishaw Laser unit:Model FOP 1x Renishaw Laser unit:Model FOP7-514 2x Spectra-Physics Laser Heads:Model no. 160-C4210 1x Laser Head Power Cable: 1x Interlock Overide Cable B 2x Spectra-Physics Laser Power Supplies:Model no. 263-C03 714792R-did not power on. - (with enable key).Model no. 263-C04 - powers on. - (no enable Key). 2x Power Supply Cables 2x Spectra-Physics RemoteModel 361C 1x YC-05II Video Camera Objectives: 1x RED- Unbranded 4/ 0.10 160/0.17 1x BLUE- Unbranded 40/ 0.65 160/0.17 1x GREEN- Olympus SLMPlan 20X /0.35 ∞ / 0

Dionex DX-500 Ion Chromatography System - AD20 GP50 AS40 ED40 LC20 Lab This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and has been serviced by a qualified technician (report available on request). It is in good working order. It is in good cosmetic condition with minor marks. Included are; LC20 Chromatography EnclosueModel - LC20SN - 00030734 ED40 Electrochemical DetectorModel - ED40-1SN - 00030525 GP50 Gradient PumpModel - GP50SN - 00010476 AD20 Absorbance DetectorModel - AD20-1SN - 99010291 AS40 Automated SamplerModel - AS40-1SN - 08070894

Thermo Fisher Safe 2020 1.8 Class 2 Biological Safety Cabinet Lab This item was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers on and the fan, airflow, white light, UV, and window up/down function properly. It is in good cosmetic condition with some minor marks from use. Safe Working area 78 x 180cm Unit height with stand: 226cm Included is Vacuubrand VHC PRO Vacuum Hand Controller as well as the stand. Socket tester not included.

Bespoke Purpose Built Laboratory Autoclave Room This is being sold on behalf of a client. It is surp (more)lus to requirements. The unit is in good working order, but will need to be dismantled on site by a potential buyer. The class 1 cabinet is included in the sale. The system is located in Alnwick, Northumberland. Any potential buyer will need to be able to dismantle the system for removal. It is going to need a lot of building work to be demolished, supported and reinstated for the removal. Also the water mains etc. The unit is mounted to the floor but has extensive pipework that goes approximately 4-5 feet below ground.  The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Interscience Spiral easySpiral Pro Automatic Spiral Unit Lab This was removed from a university lab  (more)where it was surplus to requirements. The item powers on and appears to run through test sequences. The item is in good cosmetic condition.

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

10x Genomics Chromium Controller for Single Cell Assays This is being sold on behalf of a university (more) client. It is in good working order and is in good cosmetic condition with minor marks. The client simply upgraded to a newer unit. The unit is available for collection from Cambridge, but we may be able to arrange delivery for an additional fee. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Waters Acquity UPLC H07UPT, H07UPA, H07UPB & F07UPH System This item was removed from a univers (more)ity where it was surplus to requirement. All included units are in good cosmetic condition and power on independently, we are unable to test them further as a system at our facility. This system comprises the following: 1 x Waters Acquity TUV Detector- H07UPT1 x Waters Acquity Sample Manager- H07UPA1 x Waters Acquity Binary Solvent Manager-H07UPB1 x Waters Acquity Ethernet Box -F07UPH

Rodwell Ensign 125 Autoclave This item was removed from a university lab where it was surplus to req (more)uirements. The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.The item is due for a service, and no further testing was conducted. The previous client has stated it was in working order prior to removal. Specifications:- Model: Ensign 125 - Serial No.: 1861 - M24 Controller

SYNGENE G:BOX Chemi XRQ Gel Imaging System This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up and is in good working order. It connects to the software and works. SYNGENE G:BOX Chemi XRQModel: Chemi XRQS/N: DR4V2/2858

1x Dyno Mill Grinder KDL A1x Tricool chiller MINAC 005LTS These items were removed from a university (more) lab where they were surplus to requirements. Both items are in good cosmetic condition and power on, we are unable to test them further at our facility. Information from the client states both units are in working order.

Rodwell Ensign 125 Autoclave This item was removed from a university lab where it was surplus to req (more)uirements. The unit powers on and is in reasonably good cosmetic condition. A plug was fitted for testing, then removed.The item is due for a service, and no further testing was conducted. The previous client has stated it was in working order prior to removal. Specifications:- Model: Ensign 125 - Serial No.: 2295 - M24 Controller

Priorclave PS/QCS/SV100 Top Loading Autoclave This was removed from a university lab where it was su (more)rpus to requirements. The unit powers up but has only been partially tested as it requires a steam generator, which we do not have. It is in good cosmetic condition with minor marks.

Beckman Avanti Model J-25 Refrigerated Centrifuge This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and has been tested with a JA20 rotor (Not included). It worked well up to the tested speed of the rotor's max of 20,000rpm. The refrigeration works well. It is in reasonably good cosmetic condition with some minor marks.

This Astell Scientific Top Loading Autoclave AACO52 was removed from a university lab where it was s (more)urplus to requirements. The unit has been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request. It is in good cosmetic condition with minor marks from use.

This item has just arrived in our stock. Please enquire for further details.

Anritsu Pulse Pattern Generator MP1763B & Anritsu Error Detector MP1764A These units were remov (more)ed from a university lab where they were surplus to requirements. Both units power up but the Pattern generator is showing "INTERNAL CLOCK (OPTION.01)". We are told this is just because they are not linked up. We unfortunately do not have the connecting leads. They are in good cosmetic condition with minor marks from use. 1x Anritsu Error Detector MP1764AModel. M06340 1x Anritsu Pulse Pattern Generator MP1763BModel. M06940

This Agilent 1100 Series HPLC System was removed from a university lab where it was surplus to requi (more)rements. The system powers up and is in good cosmetic condition with minor marks from use. We were unable to test it further at our facility. Included are; Agilent 1100 SeriesModel - G1314A VWDSN - JP20217921 Agilent 1100 SeriesG1311A QuatPumpSN - DE14919047 Agilent 1100 SeriesG1322A DegasserSN - JP05033959 Agilent 1100 G1364A AFC Automatic Analytic Fraction Collector

DW Scientific AES Chemunex Masterclave 09 Benchtop Autoclave This was removed from a university lab (more) where it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is sin good cosmetic condition with minor marks.