58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Optronics DEI-750 Camera Controller with S97670 1.3 MP CCD Microscope Camera

UsedOptronicsCamerasGermany

€1,025.58excl. VAT

In stock

Can't find what you're looking for?

Product Type
Camera Adapters
Sensor Type
CCD
Resolution
1.3 MP
Thread/Mount
C-Mount
Detail
Color Sensor
All 8 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 8

Brands
Optronics
New/Used
Used
Product Type
Camera Adapters
Sensor Type
CCD
Resolution
1.3 MP
Thread/Mount
C-Mount
Detail
Color Sensor
Mount
C-Mount

Product description

1.3 MP CCD microscope camera with DEI-750 controller, C-mount adapter, RGB, PAL/NTSC and S-Video outputs.

The Optronics DEI-750 and S97670 microscope camera system combines a 1.3 MP three-chip CCD camera with a dedicated camera controller for laboratory microscopy, imaging, and documentation. The camera uses one 1/2-inch CCD chip per color channel and provides C-mount microscope integration.

Camera and imaging specifications

  • Image sensor: 3 × 1/2-inch CCD chips, one per color channel
  • Picture format: 6.4 × 4.8 mm
  • PAL resolution: 752 × 582 pixels per chip, 1,312,992 total
  • NTSC resolution: 768 × 494 pixels per chip, 1,138,176 total
  • Auto exposure: Microprocessor-controlled Proprietary Continuous Ratchet Algorithm
  • Auto white balance: 2,280°K–4,420°K
  • Internal lens: f/1.4
  • Optical system: Primary-color RGB separation prism
  • Instrument coupling: C-mount

Video outputs

  • PAL: PAL 4.43 signal via BNC, Y/C signal via S-VHS, and RGB signal via BNC connectors
  • NTSC: NTSC 3.58 signal via BNC, Y/C signal via S-VHS, and RGB signal via BNC connectors
  • Input: 5-pole DIN connector for the keyboard

Controller and electrical specifications

  • Fuse: 2 × F2.0A, 250V
  • Power requirements: 100–240 V~, 50/60 Hz, 0.5 A, 100 VA
  • Camera head dimensions: 37.5 × 47.5 × 60.0 mm (W × H × D)
  • Camera head weight: 0.37 kg (13.1 oz)
  • Controller dimensions: 305 × 89 × 322 mm (W × H × D)
  • Controller weight: 3.8 kg (8.4 lb)

Environmental specifications

  • Storage temperature: −10° to +60°C (14° to +140°F)
  • Operating temperature: +5° to +35°C (41° to +95°F)
  • Storage and operating humidity: 0–80%, non-condensing
  • Storage atmospheric pressure: 50–106 kPa
  • Maximum indoor operating altitude: 2,000 m
  • Mains supply voltage fluctuation: ±10%
  • Installation overvoltage category: II
  • Pollution degree: 2

Included equipment

  • Optronics 60674 DEI-750 camera controller
  • Optronics control keyboard for camera controllers
  • Optronics S97670 CCD camera
  • Diagnostic Instruments D10NLC 1.0x C-mount adapter
  • Power cord and S-Video cable
  • Instruction manual supplied as a PDF by email

This CCD microscope camera system is suitable for microscopy imaging, color documentation, and video output through PAL, NTSC, RGB, BNC, and S-Video connections. The microscope and monitor are not included.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026