All categories

Dimensions (HxWxD): 2060 x 1400 x 620 mm

The ClonePix FL builds on the success of the Genetix white light ClonePix adding fluorescent imaging (more) capabilities for more intelligent selection. The unique proprietary technology behind ClonePix FL represents a major advance in cell line selection and development, significantly reducing the time and costs associated with new biopharmaceutical product development especially when compared to standard techniques such as limited dilution or cell sorting. Specification: White light imaging- Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension. Epi-illumination for imaging colonies as they are collected Fluorescence imaging- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance) Data tracking- Internal barcode reader for source and destination plates enables data tracking for each run Camera- Integrated 16-bit cooled CCD camera Imaging speed- 6-well microplate: 5 min for 2 wavelengths (standard conditions) Resolution- Standard: 28 micron; Maximum: 1.5 micron Containment- Fully enclosed working environment with Class 100-type, HEPA filtration Source plate type- PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray Destination plate type- PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate Source plate capacity- 10 plates Destination plate capacity- 10 plates Picking head- 8 x picking pins – each pin independently controlled Picking pin size- Diameter of picking pins is application specific – F1: suspension cells, F2: adherent cells Picking speed > 200 clones per hour Wash bath- Ethanol wash bath, automatically refilled Picking system fluids- 5 L sterile water supply, 5L waste bottle Pin drying- Proprietary halogen pin drying station

Diagenode’s Bioruptor Pico uses a gentle method of sonication to retain the integrity of DNA and/or  (more)biological complexes, including chromatin, protein-protein binding, proteinDNA complexes and other biochemical and biological assay systems. The Bioruptor Pico sonication system uses a sonication bath to generate indirect sonication waves, which emanate from an ultrasound element below the water tank. Because the system is gentler than other sonicators, the Bioruptor Pico produces better and more consistent results than with harsher sonication methods. Up to 16 closed tubes can be sonicated in parallel and the continuous rotation of tubes allows even distribution of the energy for efficient sonication. The Bioruptor Pico enables automation of sonication, guaranteeing higher reproducibility of results. Ultrasonic wave frequency: 20 – 60 kHz Ultrasonic wave output power: 25 – 210 W Sonication unit dimensions (WxDH): 350 x 245 x 280 mm Sonication bath volume: 750 ml Timer: Digital Possibility to control water flow via connector kit for Bioruptor Cooler: Yes (included) Tube holder: Available for 0.1, 0.65, 1.5 or 15 ml tubes Total weight: 7,90 kg Number of samples to be processed simultaneously: 0.1 ml tubes – 12 samples 0.2 ml tubes – 16 samples 0.65 ml tubes – 12 samples 1.5 ml tubes – 6 samples 15 ml tubes – 6 samples

Compact design Rotisserie and rocker in one unit Up and over door for accessibility Accurate tempera (more)ture control Advanced safety features Variable speed control The incubator has a stainless steel interior, whilst the door is constructed from a double glazed panel of smoked acrylic and polycarbonate to provide radiation protection. The `up and over’ door mechanism gives excellent access to the incubator.

Capacity: 610 g Readability: 0.01 g Repeatability: 0.01 g Linearity: ± 0.02 g Pan size: ø 180 mm Dim (more)ensions (WxDxH): 245 x 321 x 89 mm Weight: 3.6 kg

Capacity: 220 g Readability: 0.1 mg Repeatability: 0.05 mg Linearity: ± 0.2 mg Stabilization time (f (more)ine range):  4 s Stabilization time: 1.5 s Pan size: 78 x 73 mm Weighing chamber height: 235 mm Dimensions (WxDxH): 263 x 487 x 322 mm Weight: 10 kg

Capacity: 610 g Readability: 0.01 g Repeatability: 0.01 g Linearity: ± 0.02 g Pan size: ø 180 mm Dim (more)ensions (WxDxH): 245 x 321 x 89 mm Weight: 3.6 kg

Capacity: 3100 g Readability: 0.01 g Repeatability: 0.01 g Linearity: ± 0.02 g Pan size: ø 180 mm Di (more)mensions (WxDxH): 245 x 321 x 89 mm Weight: 3.6 kg

Range: 410g Range (fine area): 80g Readability: 0.01 g Readability (fine area): 0.001 g Reproducibil (more)ity: 0.003 g Reproducibility (fine area): 0.001 g Linearity: ±0.005 g Linearity (fine area): ±0.002 g Weighing platform: Ø 130 mm Dimensions (WxDxH): 194 x 316 x 337 mm Weight: 3.8 kg

Speed (100 rpm increments): 100 – 4400 rpm Maximum RCF: 3000 x g Maximum capacity: 4 x 100 mL Accele (more)ration time: ≤ 19 s Deceleration time: ≤ 19 s Timer: 0 – 99 min, or continuous Dimensions (WxDxH): 320 x 400 x 240 mm Weight: 19 kg Equipped with: 1x Eppendorf A-4-38 swing-out rotor 4x Eppendorf 100 mL round bucket 4x Eppendorf insert for 4 round bottom tubes

The MultiExact 4100 is a high-performance multi-gas analyzer designed to provide up to four simultan (more)eous gas stream measurements including: oxygen (O2), carbon dioxide (CO2), carbon monoxide (CO), nitrous oxide (N2O), methane (CH4) and moisture (H2O).

The G 7735 Washer/Disinfector is intended for cleaning and disinfection of dental and general medica (more)l instruments and accessories. It cleans and when using the disinfection cycles, simultaneously thermally disinfects at (93 °C) instruments and accessories. Areas of effectiveness are physical removal or thermal inactivation of vegetative bacteria including mycobacteria, fungi, fungal spores and viruses.These categories include the Mycobacterium tuberculosis and the Enterococcus faecium.

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg

Microplate shaker with microprocessor control that can accommodate two or four microplates, deep wel (more)l plates or two microtube racks. Variable speed over a wide range can be adjusted to suit the application; a low speed ensures that the contents of the well are not ejected, more vigorous stirring provides effective aeration over the small surface area of each of the wells. Ideal for use in immunology, biotechnology, microbiology and pharmacology applications. Two independent LED displays show speed and time Integrated timer, 1 s to 160 hours, shows elapsed time or counts down, automatic switch-off and acoustic alarm when program is completed Can be used at −10 to +60 °C (80% relative humidity, non-condensing), in an incubator, CO₂ incubator or cold room Speed: 100 – 1200 rpm Speed accuracy: ±2% Circular movement: 3.0mm Number of places for microplates: 4 Dimensions (WxDxH): 280 x 430 x 100 mm Weight: 10 kg

Dimensions (WxDxH): 2300 x 700 x 780 mm Weighing stone dimensions (WxD): 680 x 530 mm

QIAcube HT enables automated mid- to high-throughput nucleic acid purification in 96-well format usi (more)ng silica membrane technology. A variety of QIAcube HT Purification Kits lets users quickly and easily purify DNA, RNA and miRNA from almost any type of sample – including cells, tissues and stool samples, as well as from bacteria and viruses in animal samples. Automated protocols and dedicated accessories and consumables increase reliability and convenience and save valuable time. The system provides the same high-quality results as other trusted QIAGEN purification technologies. Reliable DNA, RNA and miRNA extraction from virtually any sample type Mid- to high-throughput solution with dedicated purification kits saves costs and time User-friendly software allows for easy data management and documentation Innovative design features increase safety and minimize cross-contamination Convenient, flexible and easy-to-use instrument with small footprint Accessories: Vacuum Control Station Precision: 20 – 200 µl, less than 4% coefficient of variation HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Communications: RS232 and USB Throughput: 24 – 96 samples in increments of 8 samples UV lamp: Preinstalled UV lamp for worktable decontamination Tip disposal: All used tips ejected externally; no waste accumulation on the worktable Software: Supplied with unlimited user license with free upgrades by web download Pipetting system: 8 pipetting channels, pipetting volume (20-200 µl) Notebook (supplied): QIAcube HT comes with a notebook computer for added flexibility. Table capacity: 4 x SBS positions (127.76 x 85.48 mm), compatible with 96-well plates or tip racks 1 custom adapter for a reagent trough plate compatible to accept reagent troughs vacuum chamber with chambers for waste and elution Dimensions (WxHxD): Instrument 540 x 450 x 630 mm, vacuum control station 495 x 520 x 400 mm Weight: QIAcube HT instrument 41 kg, vacuum control station 19 kg

96-well acrylic manifold for proteins and nucleic acids: Dot-, spot- and slot-blot array systems. Co (more)mpatible with multi channel pipettes Tension on the clamping is adjustable, permitting use of a variety of blotting and filtration media The Minifold system consists of four basic components: Sample well plate, filter support plate, vacuum plenum and metal clamping plate. 96-well spot-blot system: Standard microplate format. Sample volumes as low as 25 μl can be applied, with very high signal intensity.

Prevent costly delays with an enhanced understanding of sample quality using the Thermo Scientific N (more)anoDrop One Microvolume UV-Vis Spectrophotometers. Innovative Thermo Scientific Acclaro Sample Intelligence technology is built into every instrument for improved measurement accuracy and contaminant identification. Quantify and qualify DNA, RNA, and protein samples  in seconds with only 1-2 μL, and obtain full-spectral data before you decide to use samples in downstream applications. Wavelength Range: 190 to 850 nm Wavelength Accuracy: ±1 nm Spectral Bandwidth: ≤1.8 nm (FWHM at Hg 254 nm) Measurement Time: 8 seconds Pathlength: 0.030 to 1.0 mm (auto-ranging) Photometric Range: 10 mm equivalent 0–550 A Repeatability Typical: 0.002 A (1.0 mm path) or 1%CV, whichever is greater Photometric Accuracy: 3% at 0.97 A, 302 nm, (Absorbance expressed at Abs/mm at 25°C) Concentration: dsDNA; 27,500 ng/μL, BSA (IgG); 820 (400) mg/mL Detection Range: dsDNA; 2.0 ng/μL, BSA (IgG); 0.06 (0.03) mg/mL Detector Type: 2048-element CMOS Linear Image Sensor Light Source: Xenon Flash Sample Volume: Minimum 1μL Dimensions (LxWxH): 200 x 254 x 323 mm Weight: 3.6 kg

Dimensions (WxDxH): 650 x 600 x 1121 mm Aperture (WxH): 550 x 300 mm Velocity: 0.55m/sec Noise Level (more): 52db(A) Filter: Large Capacity Carbon

WAVE Bioreactor is the ideal device for cell culture. Culture medium and cells contact only a preste (more)rile, disposable chamber called a Cellbag that is placed on a special rocking platform. The rocking motion of this platform induces waves in the culture fluid. These waves provide mixing and oxygen transfer, resulting in a perfect environment for cell growth that can easily support 10 x 10-6 cells / ml. The bioreactor requires no cleaning or sterilization, providing the ultimate ease in operation and protection against cross-contamination.

Sensor: CMOS 1/2.3 inch Pixels: 4912 x 3684 pixels, 18.0 Mpix Scan mode: Pixel size: 1.25 μm x 1.25  (more)μm Colour filter: RGB Mounting: C-mount Image frequntion: – up to 6 shots per second (4912 x 3684 pixels) – up to 18 shots per second (2546 x 1842 pixels) – up to 32 shots per second (1228 x 922 pixels) Exposure: Automatic or manual White balance: Automatic/manual Dynamic range: 65 db S/N max: 42 db Data interface: USB 3.0 high speed 80 Mb/s Operating conditions: 0 – 50° C, 30-80 % humidity Storage temperature: -20 to 60° Celsius Power supply: 5V via PC USB port Housing: Zinc-aluminium alloy, 68 x 68 x 45 mm Supplied with: – 0.5x objective lens with C-ring – USB 3 cable – 30 and 30.5 mm to 23.2 mm tube adapters for stereo microscopes – 76 x 24 mm calibration slide (1mm/100) – CD ROM with ImageFocus Alpha software – cardboard box Software: Supplied with ImageFocus Alpha analysis software. Suitable for Windows 7, Windows 8 (32 and 64 bit configurations) System requirements: Intel Core 2, 2.8 GHZ or higher, 2 GB, USB-3

Compact, universal small shaker suitable for shaking tasks with all small vessels. Two operating mod (more)es: Mode A (safe mode with attachment detection) the maximum speed of 3.000 rpm is only reached with the standard attachment in touch mode. When using other attachments the speed is limited to 1.300 rpm. Mode B (without attachment detection) a speed of 3.000 rpm is possible with all attachments. Orbital shaking movement amplitude 4.5 mm Speed 0 – 3000 rpm Dimensions (lxwxh) 148 x 205 x 63 mm Weight 2.9 kg

Dimensions (WxDxH): 2020 x 750 x 950 mm