All categories

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Max. Speed: 13300 rpm Max. RCF: 17000 x g Includes: 24 x 1.5/2.0mL rotor with ClickSeal biocontainme (more)nt lid Run Time: 1 to 99 min. (1 min. increments); HOLD Dimensions (HxWxD): 230 x 240 x 350 mm Weight: 10.5 kg

Motion: orbital Rotation speed range: 30 – 500 rpm Operating Mode: Timer function / continuous opera (more)tion Orbit / Stroke: 10 mm Timer: Yes (max. 99 h 99 min 99 s) Platform size: 285 x 285 mm Max. Load: 5 kg

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 153 x 128 x 109 (more) mm Weight: 730g

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 153 x 128 x 109 (more) mm Weight: 730g

Temperature range: -9°C to -26°C Maximum fluctuation in freezer section: 3.3°C Maximum gradient free (more)zer section: 6.6°C Capacity: 129 L Internal dimensions (HxWxD): 663 x 454 x 450 mm Dimensions (HxWxD): 820 x 601 x 618 mm Weight: 42 kg

VWR Analog Vortex Mixers offer variable analog speed control with continuous or touch mode operation (more). Control allows low rpm start up for gentle shaking or high speed mixing for vigorous vortexing of samples. Two modes of operation; continuous mode or touch mode which activates mixing when depressing the cup head.

Large digital display Precise microprocessor control Temperature range: ambient +5°C to 150°C (0.1°C (more) increments) Anodized aluminum block (24x 1.5 mL tubes) Easy user calibration Sigle block model

Capacity: 153 L Dimensions (HxWxD): 850 x 550 x 612 mm Weight: 31.7 kg Top plate is missing

For the use in cell biology just use a pump head which features convex rollers and does not squeeze  (more)the tubing as conventional rollers Models features a smooth start operation which prevents spills and splashing media. The speed will ramp up slowly until your set rpm has been reached Safety for continuous operation: the motor will be switched off if a high thermal load situation occurs to prevent accidents Flow rates of 3.6 to 3900 ml/min with single-channel pump heads High speed range from 50 rpm to 600 rpm This pump drive is not suitable for multi-channel operation Speed: 50 – 600 rpm Accuracy speed: ±2 % Dimensions (WxDxH): 166 x 256 x 225 mm Weight: 7.1 kg

Temperature range: -10°C to +50°C Temperature fluctuation: ±1°C (ON-OFF control), ±0.2°C (PID contro (more)l) Temperature uniformity: ±0.5°C (set 37°C, ambient 20°C, no load) Temperature program operation: 3-steps, 0.5 hr ~ 99.5 hr 1-99 repeating, or unlimited Capacity: 126 L Dimensions (HxWxD): 1020 x 700 x 600 mm Inner dimensions(HxWxD):  555 x 620 x 390 mm Weight: 69 kg

PURELAB Chorus provides a complete solution from tap to ultrapure water direct from a potable water  (more)supply and is ideal for laboratories needing up to 100 liters of 10 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from the dispenser. Dispense Flow rate: >1.5 l/min Inorganics (resistivity at 25°C): 1 to 10 MΩ.cm Organics (TOC): <30 ppb Bacteria: <5 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively Neutral DNase: <5 pg/ml RNase: <1 pg/ml Daily Usage (max): 100 l/day Daily Usage (min): 1 l/day Delivery Flow Rate: 10 l/hr Equipped with: Elga LA760 100 litre storage tank Elga LA824 dispenser Excluding new filters

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (not included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Maximum Capacity: 1600 g Readability: 0.1 g Pan Size: 174 x 230 mm

Capacity: 310 g Readability: 1 mg Repeatability: 1 mg Linearity: 2 mg Drift: ±3 ppm/K Stabilization  (more)time: 1 sec Weighing pan Ø: 120 mm Chamber height: 209 mm Weight: 4.9 kg

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (not included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Parameter: pH Channel: Single-channel pH measuring range: 0 – 14 pH resolution: 0.01 pH accuracy: ±0 (more).01 Temperature Range: 0°C – 100°C Temperature resolution: 0.1°C Temperature accuracy: ±0.5°C Dimensions: 227 x 147 x 70 mm Weight: 0.63 kg

Max. Speed: 80000 rpm Control Speed Accuracy: ±2 rpm Max. RCF: 546,883 x g Temperature Range: 0°C to (more) 40°C Capacity: 6 x 250 mL Acceleration/Braking Profiles: 10/11 (10 and coasting) Program Storage: 1000 programs with step-runs Dimensions (HxWxD): 880 x 790 x 690 mm Weight: 390 kg Equipped with: 1x Thermo AH-650 swing-out rotor (max 50000 rpm) 6x Thermo 52426 bucket (5 mL capacity)

Clean Air DLF series is a high quality vertical laminar flow workbench range for handling non-hazard (more)ous materials that require a clean working environment. DLF PCR Series is designed to perform PCR. These cabinets ambient air entering the work area, ensures product protection. Air speed: 0.35 m/s Lighting: >800 lux Noise level: <58 dB(A) Filters: Downflow HEPA filter (EN 1822), H14, efficiency 99.995% MPPS, Pre-filter efficient (EN 779): G3, efficiency 90% Am Dimensions (WxDxH): 1290 x 740 x 1360 mm Internal dimensions (WxDxH): 1190 x 600 x 685 mm Weight: 170 kg Including support frame

Temperature range: 0°C to 8°C Net capacity: 99 liters Weight: 43 kg

Capacity: 2100 g Readability: 10 mg Reproducibility: ±10 mg Linearity: ±30 mg Response time: 1.5 sec (more) Weighing plate: Ø 180 mm Dimensions (WxDxH): 218 x 360 x 88 mm Including printer

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

The fraction collector collects fractions from ÄKTA pure purification runs. The fraction collector c (more)an be used for: • Fixed volume fractionation • Peak fractionation • Combined fixed volume fractionation and peak fractionation Fraction collector F9-C has the following functions for reducing sample spill during fractionation: • Drop Sync • Accumulator Fraction collector tubes and bottles Tube or bottle size: 3 mL: Diameter (min/max) – 10.5/11.5 mm, Height (min/max) – 50/56 mm 5 mL: Diameter (min/max) – 10.5/12 mm, Height (min/max) – 70/76 mm (2 racks included) 8 mL: Diameter (min/max) – 12/13.3 mm, Height (min/max) – 96/102 mm 15 mL: Diameter (min/max) – 16/17 mm, Height (min/max) – 114/120 mm 50 mL: Diameter (min/max) – 28/30 mm, Height (min/max) – 110/116 mm 250 mL bottle: Diameter (min/max) – (LxW) 55 x 55/64.5 x 64 mm, Height (max) – 121 mm Deep well plates: No. of wells: 24, 48, or 96 Shape of wells: Square, not cylindrical Well volume: 10, 5, or 2 ml

Temperature range: Ambient +5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluc (more)tuation (at 50°C): ± 0.1 K Temperature uniformity (at 37°C): ± 0.5 K Temperature uniformity (at 50°C): ± 0.9 K Warming up time (to 37°C): 70 min Warming up time (to 50°C): 115 min Recovery time after door was opened for 30 sec (at 37°C): 5 min Recovery time after door was opened for 30 sec (at 50°C): 6 min Maximum load: 70 kg Maximum load per shelf: 30 kg Capacity: 240 L Dimensions (WxHxD): 1035 x 825 x 745 mm Interior dimensions (WxHxD): 800 x 600 x 500 mm Weight: 93 kg

Short cleaning times through ultrasonic cleaning – no time-consuming washing. The device is also sui (more)table for plastic pipettes, burettes and other glass devices. Timer: 1, 2, 3, 4, 5, 10, 15, 30 min. and endless. Useful depth: 850 mm Filling quantity: min 9 litres, max 18 litres Internal dimensions (LxWxH): 150 x 150 x 895 mm External dimensions (LxWxH): 330 x 330 x 1003 mm Weight: 19.5 kg

The Optigel provides a clean air working area of class ISO-5, according to ISO-14644. Air constantly (more) flows horizontally through an absolute HEPA filter into the working area, thus protecting the product inside the cabinet from existing particles in the air. The air flows evenly across the filter’s surface, thus preventing air turbulence that can cause cross contamination. Lighting: two fluorescent light bulbs provide 400-600 lux UV light: 254 nm Dimensions (HxWxD): 800 x 1243 x 850 mm Internal dimensions (HxWxD): 620 x 1212 x 540 mm Weight: 100 kg

Used in Beckman Coulter J2, J6, and Avanti J Series Centrifuges Maximum speed: 10000 rpm Maximum sol (more)ution density: 1.2 g/mL Maximum allowable imbalance of opposing loads: 10 grams Capacity: 6x 500 mL Rotor material: aluminum Weight: 19 kg

MultiFlo FX is an automated multimode reagent dispenser for 6- to 1536-well microplates. The system  (more)incorporates several unique technologies in its modular design, such as Parallel Dispense, random access dispense (RAD) and patented Automated Media Exchange (AMX) modules. The technologies in MultiFlo FX microplate dispenser enable many liquid handling applications from 2D and 3D cell culture to concentration normalization assays, ELISA, bead-based assays and more. A fully configured MultiFlo FX replaces up to five liquid handlers, saving space, time, and instrumentation budgets. MultiFlo FX delivers complete workflow automation in cell imaging and biochemical applications. Product Type: Microplate Dispenser For Use With (Application): Primary/secondary screening assays, compound storage, genomics and proteomics research, ELISA, cell based washing, fixing, staining, volume or concentration normalization For Use With (Equipment): BioStack and third party automation compatible; BioSpa 8 Automated Incubator compatible Volume: 500 nL to 30,000 μL Precision: <5% CV at 1 μL, <2.5% CV at 5 μL, <2.0% CV at 10 μL Accuracy: ±5% at 1 μL, ±2.0% at 5 μL, ±2.0% at 10 μL Plate Type: Dispensing (peri pump and syringe): 96-, 384- and 1536-well standard, deep and PCR plates; 6-. 12-, 24- and 48-well plates (dispense tip configurable); Washing: 96-. 384-well standard plates; 6-, 12-, 24-,and 48-well plates (with compatible manifold configuration) Speed: 96 wells, 5 μL cass, 10 μL/ well: 3 s, 96 wells, 5 μL cass, 20 μL/ well: 3.5 s, 384 wells, 5 μL cass, 5 μL/ well: 6.5 s, 384 wells, 10 μL cass, 10 μL/ well: 8 s, 384 wells, 1 μL cass, 1 μL/ well: 6 s, 1536 wells, 1 μL cass, 1 μL/ well: 21 s Dimensions (WxHxD): 435 x 203 292 mm Weight: 6.5 kg