All categories

Beckman Type 50.2 Ti centrifuge rotor. Titanium. Fixed-Angle (24-degree). Max. speed 50,000 rpm, 302 (more),000 x g. Max. capacity 12 x 39 mL, Used In Beckman CoulterClass H, R, and SPreparative Ultracentrifuges. User manual.

Beckman Tube Sealer applies heat to the cap of the centrifuge tube to create an airtight seal for st (more)orage and transport. It presents some deterioration due to rust in the lower part that does not influence its operation. Includes two tube racks to be positioned along the guided rail for higher performance operation. Gift ultracentrifuge tubes. User manual.

Beckman S4180 centrifuge rotor. Max speed: 5,500 rpm (4500 rpm in the nonrefrigerated centrifuges),  (more)Max RCF: 5,450 x g. Max. rotor capacity: 4 x 180 mL. Includes 4 buckets and 2 adapters (361228) for seven 15 mL tubes. Compatibility with Beckman Coulter Allegra 21 series, GS-15 series, and Spinchron 15 series centrifuges. User manual.

Beckman Type 50.3 Ti Fixed Angle rotor. Maximum Speed: 50,000 rpm. RCF at r max: 223,000 xg. Tube An (more)gle: 20 degrees. Number of Tubes x Tube Capacity: 18 x 6.5mL. Nominal tube dimensions: 13 x 64 mm.

BBL GasPak 100 anaerobiosis jar. Capacity 2.5 L jar. Vented lid with ''O'' ring gasket, a clamp/thum (more)bscrew assembly, a catalyst reaction chamber, two catalyst charges, one 12-place dish rack for 100 x 15 mm dishes, and one 13-place, 13 mm tube holder.

Baths digital DK2000 Series. Temperature range RT+5 to 100ºC. Resolution 0.1 ° C Stability ± 0.5 ºC (more), uniformity ± 1ºC. Timer 0-999 min. Digital display of time, temperature, and alarms. Cuba stainless steel. Perforated lid for bottles of different diameters (diameter max. 120 mm). Models available: 1 row, 2 holes, 6.6 L; 2-row, 4 holes, 12.7 L and 2 rows, 6 holes, 18.7 L. It shows the price for the model 1 row, 2 holes, 6.6 L. For other models consult the drop-down.

B Braun Mikro Dismembrator U grinder. Vibration amplitude 16 mm (constant), with a vibration frequen (more)cy of 2,000/50 min Timed operation from 00:01 to 98:59 and continuous. Fine grinding, homogenization and efficient mixing of small sample volumes and reproduction of a sample. Depending on the characteristics of the material, the final fineness of the sample can be approximately 1 µm. Digital screen. Sheet steel cover with acid-resistant lacquer. Dimensions 297x259x205mm.. Weight 19 kg. User manual. Discover the B Braun Biotech Mikro Dismembrator U grinder at Galileo Equipment, the perfect ally for sample disaggregation in the laboratory. This high-precision device guarantees consistent results in the preparation of biological samples, thanks to its advanced technology and robust design. Ideal for research and analysis laboratories, the Mikro Dismembrator U offers superior performance in the treatment of tissues and cells. Acquire quality and efficiency with new and reconditioned equipment at www.galileoequipos.com.

Autoclaves horizontal BKM-ZB Series. Autoclaves Class B for use in clinical laboratory or dental (m (more)eets EN13060). Models with vat of 18 L (BKM-Z18B), and 24 L (BKM-Z24B). Temperatures of 121ºC and 134ºC with accuracy 1ºC. Pressure max. 2.3 Bar. Pre-vacuum. Capacity of water tank 4L, consumption 0.18 L/cycle. USB for data logging. Low level of noise. LCD Display with temperature indicator, pressure, time, state operation. Cycles of pre-engineered and programmable by the user. Mini printer optional. Safety mechanisms of the door, overpressure and overtemperature, fault alarm. It shows the price for the model 18 L (BKM-Z18B. Other models check drop-down.

https://es.sysmex-flowcytometry.com/reagents/antibodies/

Alresa Digicen centrifuge. Maximum speed adjustable up to 3900 rpm in 10 rpm steps. Timer from 1 to  (more)99 min. Selectable braking. Includes 4 x 70 mL swing-out rotor. Manual not included. Compatible tubes: PP centrifuge tube with round bottom, 100x35 mm, autoclavable, capacity 70 ml. Quantity 20 units (68 € plus VAT). Ref.: BGD018 The Alresa Digicen centrifuge is a robust lab instrument that offers a wide range of functions for sample separation. With its modern and compact design, this centrifuge is ideal for use in research, clinical or industrial laboratories. In addition, it features a digital control panel that allows easy programming of centrifugation speed and time, making it a versatile and easy-to-use tool for any laboratory application.

HPLCs analytical Ecom 2000 Series. Selectable modules: detector UV-VIS (ECD20800) or PDA (ECDA2800), (more) autosampler for 96 vials (L3320), pump isocratic flow of 10 ml/min, modulus of gradient with degasser (ECB2004), column oven with heating/cooling (ECO2080) or single heating (ECO2099). Software Clarity for control and data acquisition and processing. The marked price corresponds to the setting ECS05, see prices below for other configurations. ECOM Quarternary HPLC system ECS05 with PDA detector and autosampler.

Alresa Digicen centrifuge. Maximum speed adjustable up to 4,300 rpm in 10 rpm steps. Timer from 1 to (more) 99 min. Selectable braking. Includes 4 x 50 mL swing-out rotor. Manual not included. The Alresa Digicen centrifuge is a robust lab instrument that offers a wide range of functions for sample separation. With its modern and compact design, this centrifuge is ideal for use in research, clinical or industrial laboratories. In addition, it features a digital control panel that allows easy programming of centrifugation speed and time, making it a versatile and easy-to-use tool for any laboratory application.

Thanks to their highly efficient ULPA filters, AIRTECH SMARTFLOWAirtech BSC-1304 II A2 Class II-A2 b (more)iological safety cabinets are designed to protect both samples, the operator and the laboratory environment when working with potentially infectious agents. Its high qualities backed by a series of air quality certifications, filters, structure, electrical components and diversity of sizes provide the operator with the greatest comfort and safety when working. It can be used in hospitals, research centers and life science companies in general. AIRTECH SMARTFLOW Class II-A2 biosafety cabinet. Working size 130x79x200 cm (LxFxW). Centrifugal turbine with adjustable speed. Flow rate upward 0.53 ± 0.025 m / s, downward 0.33 ± 0.025 m / s. 30/70 air recirculation (exhaust / recirculation). ULPA extraction and discharge filters (according to IEST-RP-CC001.3), with an efficiency of 99.999% for a particle size between 0.1 and 0.3 microns. Front window with double laminated glass. Stainless steel interior. Programmable germicidal UV and LED white light. Two interior plugs. LCD display with indicators of air flow, temperature and humidity of the work area, filter pressure, hours of UV light, hours of filter use. Eco operating mode. Incorrect air flow, filter replacement and front window height alarms. Support structure included. CE certified. Manufactured according to EN 12469; ISO 14644.1 (air quality); ISO29463 (filtration) and EN-61010-1 (electrical safety).

AIRTECH SMARTFLOW Class II-A2 biosafety cabinet. Working size 130x79x200 cm (LxFxW). Centrifugal tur (more)bine with adjustable speed. Flow rate upward 0.53 ± 0.025 m / s, downward 0.33 ± 0.025 m / s. 30/70 air recirculation (exhaust / recirculation). ULPA extraction and discharge filters (according to IEST-RP-CC001.3), with an efficiency of 99.999% for a particle size between 0.1 and 0.3 microns. Front window with double laminated glass. Stainless steel interior. Programmable germicidal UV and LED white light. Two interior plugs. LCD display with indicators of air flow, temperature and humidity of the work area, filter pressure, hours of UV light, hours of filter use. Eco operating mode. Incorrect air flow, filter replacement and front window height alarms. Support structure included. CE certified. Manufactured according to EN 12469; ISO 14644.1 (air quality); ISO29463 (filtration) and EN-61010-1 (electrical safety). Thanks to their highly efficient ULPA filters, AIRTECH SMARTFLOWAirtech BSC-1304 II A2 Class II-A2 biological safety cabinets are designed to protect both samples, the operator and the laboratory environment when working with potentially infectious agents. Its high qualities backed by a series of air quality certifications, filters, structure, electrical components and diversity of sizes provide the operator with the greatest comfort and safety when working. It can be used in hospitals, research centers and life science companies in general.

Spectrophotometer UV/Vis Agilent 8453 (G1103A). Range wavelength from 190 to 1100 nm. Detector fotod (more)iodoarray. Reading in less than 1 sec. Includes PC with software built-in UV/VisChemstation B4: advanced, biochemistry. Pack dissolution and general. Includes instruction manual. < 1.0 % At 200 nm, solution of 1.2% KCl, scanning white in air, 5s integration time; (EP*method)** < 0.05 % At 220 nm, solution of 10 g/l NaI, scanning of the target in air, a 5-s time ingegración; ( ASTM method) < 0.03 % At 340 nm, solution of 50 g/l NaNO2, escanéo white on air, 5 s integration time. ASTM method Software: UV/Vis Gemstation B04

Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Firmware A.07.02 8 ul Flow Cell. K (more)eeps original packaging. The FLD provides quantitative data and fluorescence spectra from a single run. Simultaneous detection of multiple wavelengths improves sensitivity and selectivity. Features include: Rotating gratings for on-line, multi-signal spectral data acquisition without loss of sensitivity. Lower limits of detection with Raman S/N > 3000 (using dark signal noise reference). Spectra and quantitative data from a single run. Simplified optical design to optimize baseline stability. Resolution gain of up to 100% in fast LC using 145 Hz data acquisition rate. Long life xenon lamp for maximum sensitivity. Long life flash lamp (> 4000 hours). Easy front access allows quick inspection or change of the flow cell. Agilent Infinity 1260 Fluorescence Detector (FLD) G1321B Spectra. Lower detection limits and easier spectral analysis for HPLC and UHPLC. As a stand-alone detector or configured in an automated system, the Agilent 1260 Infinity Spectra Fluorescence Detector brings highly sensitive fluorescence detection to your lab. This easy-to-use detector provides quantitative data and fluorescence spectra from a single signal. Simultaneous multiple wavelength detection improves sensitivity and selectivity. Use online spectral information for rapid method optimization and separation quality verification. High-speed fluorescence detection data processing up to 145Hz, keeping pace with ultra-fast LC analysis speed.

Agilent 1200 G1323B Handheld Control Module. Install any desired configuration of Agilent 1200 Serie (more)s modules. The control module software will reflect which modules are present in the LC system and adjust the screens accordingly. Enter parameter settings for every module, perform reset and on/off functions as well as calibration and configuration settings in a self-explanatory and intuitive way.Define automated analyses including methods, timetables, injector programs, method sequences and automated calibration settings using the control module.Protect your method from any inadvertent keyboard changes by setting method protection. Use PC cards to store and transfer methods and sequences between Agilent 1200 systems. Monitor all operations and error events using the self-updating logbooks. Use the context-sensitive on-line information system to get further information on all topics. Use the context-sensitive menu function to have the quickest access on related functions. Display data graphically using the Plot screen where as many as three different signal scan be monitored at the same time. Print in formation to a PCL3 compatible printer connected to the serial RS232 port of an Agilent 1200 module.

Agilent 1100 UV / Vis Detector (VWD - G1314A). 190-600 nm wavelength range. Greater limits of detect (more)ion with simplified optics for high sensitivity, low deviation from the base line and wide linear range. Use a deuterium lamp as a source of light and a double beam photometer for the detection system. It can be used independently to add as a module to an HPLC. The HP Agilent 1100 Series G1314A Variable Wavelength Detector (VWD) offers high sensitivity while improving productivity. This tool has a wide linear range for the reliable simultaneous quantification of impurities and major and minor products. Programmable wavelength switching for optimized sensitivity and selectivity for the elution of each analyte. Minimum baseline noise with the highest baseline stability for the lowest detection limits. Specs:       Wavelength range: 190-600 nm       Wavelength accuracy: +/- 1 nm       Bandwidth: 6.5 nm       Double beam photometer with deuterium lamp       Linearity:> 2 AU (5%) upper limit       Drift: 3 × 10-4 AU / h at 254 nm       Analog output connection

Agilent 1100 HPLC G1365B Multi-Wavelength Detector. This MWD offers excellent sensitivity for both s (more)ingle and multiple wavelength detection. This MWD utilizes deuterium and tungsten lamps with a wavelength range of 190 to 950 nm, offering an expanded detection range with lowest detection limit. The G1365B’s diode array design enables simultaneous acquisition of up to eight compound-specific wavelengths for increased sensitivity and selectivity. The programmable slit (1 to 16 nm) also allows rapid optimization of sensitivity, linearity, and spectral resolution.

Agilent 1100 Series HPLC System consisting of: G1322A 1100 Series Degasser; G1311A Quaternary Pump s (more)eries 1100 FW: A.07.01; G1313A 1100 FW series automatic injector: A.07.02; G1316A 1100 FW Series Column Compartment: A.07.02; G1315A Diode Detector (DAD) 1100 FW series: FW.07.02, 10 mm cell with G1369A LAN communication card; PC with W7 with Chemstation B.04.03 SP1.

The Agilent 1100 G1313A Autosampler is designed for the pharmaceutical routine tasks and quality con (more)trol, as well as for environmental and food analyses. The G1313A features reliable injections from 0.1 µL to 100 µL with easy adaption for injection volumes up to 1500 µL for applications ranging from microbore to semipreparative chromatography. The HP Agilent 1100 G1313A's low internal volume of 300 µL allows minimum contribution to a system's total internal volume. The system uses overlapped injections for increased productivity with sample capacities of 100 × 2-mL vials in a standard tray, 40 × 2-mL vials in a standard tray, or 15 × 6-mL vials in a half tray. Firmware A.07.02. Maintenance and current/recent verification, carried out by the Official Technical Service.

Applied Biosystems 7900HT Real-Time PCR System with 96-well block and software. 6 systems available  (more)at short notice, 84 other units with a delivery time from 4 weeks. Go for it! How does the test to detect SARS-CoV-2 work? SARS-CoV-2 is detected by smears from the mouth, nose, or throat. The smear may contain genetic material from the virus. The qualitative test is based on the principle of real-time PCR, which is a method that specifically recognizes viral RNA and amplifies it so that it is detectable by fluorescence signals.

Applied Biosystems 7900HT Real-Time PCR System with 96-well block and software. 6 systems available  (more)at short notice, 84 other units with a delivery time from 4 weeks. Go for it! How does the test to detect SARS-CoV-2 work? SARS-CoV-2 is detected by smears from the mouth, nose, or throat. The smear may contain genetic material from the virus. The qualitative test is based on the principle of real-time PCR, which is a method that specifically recognizes viral RNA and amplifies it so that it is detectable by fluorescence signals.

Ellutia 200 Series Compact GC with FID detector. Gas chromatograph compact, lightweight and easy to  (more)use. Analyses of simple and economical your samples of medical cannabis or recreational purposes to provide a quality product. Determines profiles of taste, absence of pesticides and solvents used during the extraction and potency levels of THC and CBD. The computer is ideal for users without experience in chromatography. Reduces cost and time of analysis per sample.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Samples and applications - Homogenization of foods (smoothies, homogenized foods, drinks) and prepar (more)ation of stuffings for food (e.g., meat, vegetables) - Homogenization/crushing of tablets - Homogenization of tobacco leaves - Preparation of ceramics and ceramic paste - Processing of textile fibers TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 25 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 100 - 2,500 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 23.6 m/s - Ultimate fineness, emulsions: 1-10 µm - Ultimate fineness, suspensions: 15-50 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Samples and applications - Homogenization of food (milkshakes, homogenised food, drinks) - Preparati (more)on of stuffings for food (e.g. meat, vegetables) TECHNICAL DATA - Rotor diameter: 18 mm - Stator diameter: 40 mm - Stator/rotor gap: 8 mm - Volume (H2O): 1000 - 4.000 ml - Immersion depth: 40-175 mm - Max. speed: 20,000 rpm - Max. circumferential speed: 18.8 m/s - Ultimate fineness, emulsions: - - Ultimate fineness, suspensions: - - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed

Samples and applications - Preparation of spreadable creams and soluble powders (tea, coffee, milk)  (more)- Preparation of pharmaceutical ointments and creams - Suspensions/emulsions for infusion/injection - Preparation of soap, shampoo, and conditioner; preparation of cosmetic lotions - Water analysis - Preparation of pigments, inks, and paints - Preparation of liquid crystals for displays - Preparation of biodiesel TECHNICAL DATA - Rotor diameter: 15 mm - Stator diameter: 20 mm - Stator/rotor gap: 0.5 mm - Volume (H2O): 50 - 2,000 ml - Immersion depth: 40-175 mm - Max. speed: 25,000 rpm - Max. circumferential speed: 19.6 m/s - Ultimate fineness, emulsions: 1-7 µm - Ultimate fineness, suspensions: 5-40 µm - Max. allowable working temperature: 180 °C - Materials in contact with the medium: AISI 316L, PTFE - Suitable for solvents: Yes - Sterilization and cleaning methods: it is possible to sterilize all the components of the dispersing tool in different ways according to the construction materials and the sample processed