All categories

Hirayama HICLAVE HV-50 Floor-Standing Autoclave, 50L, 120V Chamber Volume 50L Sterilization Temperat (more)ure Range 105°C to 135°C Chamber Dimensions 11.8" x 28.0" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models.INCLUDED: The Hirayama HICLAVE HV-50 Floor-Standing Autoclave, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V Chamber Volume 25L Sterilization Temperat (more)ure Range 105°C to 126°C Chamber Dimensions 9.4 x 21.6 in. (24 x 55 cm) Features - Space-saving design with lid opening upward. - Programmable auto-start for initiating a cycle up to 1 week later. - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C. - Automatic air purging by a microprocessor prevents over-pressurization during a cycle. - One-touch lever to easily open and close chamber lid. - Programmable rate of steam exhaust. - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly. The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models. INCLUDED: The Hirayama HICLAVE HV-25 Floor-Standing Autoclave, 25L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V Chamber Volume 110L Sterilizat (more)ion Temperature Range 105ºC to 135ºC Chamber Dimensions 16.5 x 31.3 in(42 x 79.5 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The 25-liter (HV-25), 50-liter (HV-50), 85-liter (HV-85), and 110 liter (HV-110) Autoclaves are self-containers, portable floor models mounted on caster wheels. They occupy minimum floor space and can fit conveniently into many locations in the laboratory. Their many uses include the sterilization of agar, media, wastes, glassware, and fermenters, especially for the larger models.INCLUDED: The Hirayama HICLAVE HV-110 Floor-Standing Autoclave, 110L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V Chamber Volume (more) 76L Sterilization Temperature Range 105ºC to 135ºC Chamber Dimensions 14.3 x 28.7 in(36.4 x 73.0 cm) Features - Automatic Lid Opening and Closing Button replaces a foot pedal. - Safety Interlock senses pressure and temperature and prevents lid from opening during a cycle, when the chamber is pressurized, and when the high temperature can cause boil over. - Programmable Auto-Start for running a cycle from 1 to 99 hours later and time for air removal before sterilization. - Large (15 liters) / Efficient Steam Condenser ensures no steam exhausts into the lab. The HG-113 and HG-133 incorporate a radiator for this. - Over-Flow Lamp indicates that the drain bottle is full and ready to be emptied. - Built-in Cooling Fan for faster post-sterilization cooling and shorter completion time. - Selectable Rate of steam venting after sterilization. - Twelve Programs Cycles can be stored. - Large Control and Display Panel improves functionality and shows the progress of the sterilization cycle. The Hirayama HICLAVE HG-80 is an advanced 85L floor-standing autoclave designed for efficient and safe sterilization. It features an automatic lid opening button to replace the conventional foot pedal and an automatic lid closing button for convenience. Its safety interlock prevents the lid from opening during cycles, ensuring safety when the chamber is pressurized or at high temperatures. The programmable auto-start can delay the start of a cycle by 1 to 99 hours. A large and efficient 15-liter steam condenser prevents steam from exhausting into the lab, complemented by a built-in cooling fan for rapid post-sterilization cooling. Users can select the rate of steam venting post-sterilization and program the air removal time before sterilization begins. Up to twelve program cycles can be stored for easy recall.The HG-80 boasts a large control and display panel, enhancing functionality and cycle progress visibility. Specifications include a chamber size of 76 liters (14.3" x 28.7"), a temperature range of 105°C to 135°C, a sterilization timer from 1 to 300 minutes, and an agar warming range maintainable from 45°C to 60°C for up to 24 hours to prevent coagulation. Additional features include a programmable air removal timer, selectable steam venting rates, and customizable temperature settings for lid interlock release for increased safety and flexibility. The unit is equipped with comprehensive safety features, including a circuit breaker with GFCI, low-water power cut-off, over-temp power cut-off, over-pressure power cut-off, safety valve, and a sensor for improper lid closing. The autoclave comes with a 15-liter water tank for the steam condenser and a 2-liter drain water bottle. It operates on 208/220/240V, 50/60 Hz, single-phase power, with a consumption of 3.8 kW, and ships at a weight of 255 lb (116 kg).INCLUDED: The Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hirayama HICLAVE HG-50 Floor-Standing Autoclave with Automatic Lid, 50L, 120V Chamber Volume 50L Ste (more)rilization Temperature Range 105°C to 135°C Chamber Dimensions 14.3" x 19.0" (36.4 cm x 48.2 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The Hirayama HICLAVE HG-50 is a floor-standing autoclave with an automatic lid, offering a 50-liter chamber capacity. It features dimensions of 19.7" x 27.2" x 35.0" and a chamber size of 14.3" x 19.0". This autoclave operates within a temperature range of 105°C to 135°C, with a sterilization timer adjustable from 1 to 300 minutes. Notably, it includes an agar warming range to maintain temperatures between 45°C and 60°C for up to 24 hours, preventing coagulation. The HG-50 provides a delayed auto-start function, programmable from 1 to 99 hours, and a built-in cooling fan. It offers a range of safety features, including a circuit breaker with GFCI and multiple power cut-offs. The model comes equipped with a 15-liter steam condenser, a 2-liter drain water bottle, and can operate on either 120V or 220V. The HG-50 is part of the HG-Series, which includes four models with varying features such as programmable auto-start, safety interlocks, multiple sterilization cycles, and an advanced control panel. The larger models, HG-113 and HG-133, incorporate a radiator for efficient steam condensing. INCLUDED: The Hirayama HICLAVE HG-50 Floor-Standing Autoclave with Automatic Lid, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hettich 1324 Swing Bucket Rotor The Hettich 1324 Swing Bucket Rotor is a centrifuge rotor designed f (more)or use in clinical and research laboratories. This rotor body has a maximum capacity of 4 x 100ml buckets, which are sold separately, and can achieve a maximum speed of 4,000 RPM with a maximum RCF of 2,630 x g. It is compatible with Hettich Rotofix 32A and Universal 320/R Centrifuges, which offer precise control for consistent results. The Hettich 1324 Swing Bucket Rotor is a useful tool for labs that require high-speed centrifugation for applications such as molecular biology, biochemistry, and cell culture research. It is easy to install and maintain, making it a reliable and cost-effective solution for your lab's centrifugation needs. INCLUDED: The Hettich 1324 Swing Bucket Rotor includes: - Rotor Body (No Buckets Included) - 6 Month Full Parts and Labor Warranty Hettich 1324 Swing Bucket Rotor SpecificationsMaximum Speed4,000 RPMMaximum RCF2,630 x gMaximum Capacity4 x 100mlMaximum Radius14.7 cmCentrifuge CompatibilityHettich Rotofix 32A & Universal 320/R Centrifuges

Hettich 1189-A Fixed Angle Rotor with Aerosol Lid The Hettich 1189-A Fixed Angle Rotor with Aerosol  (more)Lid is new, never used, in box. Accommodates 30 tubes .The Hettich 1189-A reaches maximum speeds up to 14,000 RPM with a maximum RCF of 21,555 x g. For use with Mikro 220 and 220R centrifuges. INCLUDED: The Hettich 1189-A Fixed Angle Rotor with Aerosol Lid includes: - Aerosol Lid - Full 1 Year Parts and Labor Warranty

Hermle Z600-500-P 500ml, Centrifugal Basket, Perforated Benchmark Hermle, Z600-500-P, 500ml, Centrif (more)ugal Basket, PerforatedINCLUDED: The Hermle Z600-500-P 500ml, Centrifugal Basket, Perforated includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z600-500-P 500ml, Centrifugal Basket, Non-Perforated Benchmark Hermle, Z600-500-P, 500ml, Cen (more)trifugal Basket, Non-PerforatedINCLUDED: The Hermle Z600-500-P 500ml, Centrifugal Basket, Non-Perforated includes: - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z496-K Tissue Culture Bundle The Z496-K centrifuges offer the highest tube/bottle capacity in (more) our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K Tissue Culture Bundle includes: - Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) - Z496-1000 4 x 1000ml Swing Out Rotor with Rectangular Buckets - 1 Set of Z496-1000-A50 15ml Adapters - 1 Set of Z496-1000-A15 50ml Adapters - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Z496-K High Volume Underbench Centrifuge (230V ONLY) The Z496-K centrifuges offer the highest (more) tube/bottle capacity in our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for te storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K High Volume Underbench Centrifuge (230V ONLY) includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) The Z496-K centrifuges offer the hig (more)hest tube/bottle capacity in our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk The Hermle Z496-1L- (more)A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 500ml adapters. INCLUDED: The Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk includes: - 1 x 500ml Flat Bottle Adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z496-1L-A250F 250ml Conical Bottle Insert for Z496-1000-1L, 2/pk The Hermle Z496-1L-A250F 250 (more)ml Conical Bottle Insert for Z496-1000-1L, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 250ml conical bottle adapters. INCLUDED: The Hermle Z496-1L-A250F 250ml Conical Bottle Insert for Z496-1000-1L, 2/pk includes: - 1 x 250ml adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk The Hermle Z496-1L-A15 12 (more) x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 12 x 15ml adapters. INCLUDED: The Hermle Z496-1L-A15 12 x 15ml Conical Insert for Z496-1000-1L Buckets, 2/pk includes: - 12 x 15ml adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z496-1000-AC - 4 x 1000ml Swing-out Rotor without Buckets for Z496-K The Hermle Z496-1000-AC  (more)is a 4 x 1000ml swing-out rotor designed for use with the Hermle Z496 series of centrifuges. With a maximum speed of 4,600 RPM and a maximum RCF of 5,203 x g, this rotor is capable of effectively separating samples in a range of applications. The rotor has a large maximum capacity of 4 x 1000ml, making it ideal for processing multiple samples simultaneously. It should be noted that this rotor does not come with buckets, so they must be purchased separately. Overall, the Hermle Z496-1000-AC rotor is a reliable and efficient tool for high-capacity centrifugation in a variety of laboratory settings. INCLUDED: The Hermle Z496-1000-AC - 4 x 1000ml Swing-out Rotor without Buckets for Z496-K includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z446-K Refrigerated Centrifuge The Z446 universal centrifuge series offers the highest capaci (more)ty of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446-K Refrigerated Centrifuge, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor The Z446 K universal centrifuge series off (more)ers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446-K Refrigerated Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z446 Centrifuge w/ Swing Out Rotor The Z446 universal centrifuge series offers the highest ca (more)pacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Swing Out Rotor includes: - Z446-750 4 x 750ml Swing Out Rotor - Z446-750-B50 7 x 50ml Conical Buckets (Set of 2) - Z446-750-B15 17 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z446 Centrifuge w/ Microplate Rotor The Z446 universal centrifuge series offers the highest c (more)apacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Microplate Rotor includes: - Z446-750-AC 4 x 750ml Swing Out Rotor - Z446-750-MP Microplate Carriers (Set of 4) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z446 Centrifuge The Z446 universal centrifuge series offers the highest capacity of any bench (more)top Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z366-06250 - 6 x 250ml Angle Rotor The Hermle Z366-06250 - 6 x 250ml Angle Rotor features a m (more)aximum speed of 8,000 RPM and a maximum RCF of 10,016 x g (maximum speed of 10,000 RPM and maximum RCF of 15,650 x g when in use with the Z36-HK Centrifuge). This rotor is designed for use with the Hermle Z366, Z446, Z496, and Z36-HK Series. INCLUDED: The Hermle Z366-06250 - 6 x 250ml Angle Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z366 K Refrigerated Centrifuge w/ Swing Out Rotor For applications requiring increased capaci (more)ty over the Z306 or Z326 series centrifuges, the Z366 series offers a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates, and change the end of run alarm tone. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z366 K Refrigerated Centrifuge w/ Swing Out Rotor includes: - Z366-250-HC 4 x 250ml Capacity Swing Out Rotor - Z366-250-B50 4 x 50ml Conical Buckets (Set of 2) - Z366-250-B15 10 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z366 K Refrigerated Centrifuge For applications requiring increased capacity over the Z306 or (more) Z326 series centrifuges, the Z366 series offers a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates, and change the end of run alarm tone. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z366 K Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z366 Centrifuge w/ Swing Out Rotor For applications requiring increased capacity over the Z30 (more)6 or Z326 series centrifuges, the Z366 series offers a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches. In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates, and change the end of run alarm tone. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z366 Centrifuge w/ Swing Out Rotor includes: - Z366-250-HC 4 x 250ml Capacity Swing Out Rotor - Z366-250-B50 4 x 50ml Conical Buckets (Set of 2) - Z366-250-B15 10 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z366 Centrifuge For applications requiring increased capacity over the Z306 or Z326 series ce (more)ntrifuges, the Z366 series offers a unique “Mid-Range” swing out rotor that accepts a variety of different tubes, including up to 16 x 50ml or 40 x 15ml. Despite this step up in capacity, the Z366 maintains a surprisingly compact design, with the standard air-cooled model featuring a footprint of 17 x 20 inches. In addition to the popular 4 x 250ml swing out rotor, a variety of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 2 x 3 microplate rotor is also available, as well as a 4 x PCR strips (8-strips) rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates, and change the end of run alarm tone. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z366 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z36-HK with High Speed 6 x 50ml Rotor The Z36 HK is the result of many years of experience in (more) the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000 x g, while 50ml samples, as high as 41,410 x g.In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.INCLUDED: The Hermle Z36-HK with High Speed 6 x 50ml Rotor includes: - Z326-0650-HS High Speed 6 x 50ml Round Tube Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z36-HK with High Speed 6 x 250ml Rotor The Z36 HK is the result of many years of experience i (more)n the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000xg, while 50ml samples, as high as 41,410xg.In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle Z36-HK with High Speed 6 x 250ml Rotor includes: - Z366-06250 6 x 250ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z36-HK with High Speed 12 x 1.5/2.0ml Rotor The Z36 HK is the result of many years of experie (more)nce in the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000 x g, while 50ml samples, as high as 41,410 x g.In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor, a 12 x 1.5/2.0ml rotor (included in this bundle), and more. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle Z36-HK with High Speed 12 x 1.5/2.0ml Rotor includes: - Z326-1220H High Speed 12 x 1.5/2.0ml Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z36-HK Refrigerated Centrifuge The Z36 HK is the result of many years of experience in the d (more)esign of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000xg, while 50ml samples, as high as 41,410xg. In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. INCLUDED: The Hermle Z36-HK Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty