Purite Select BIO40/BP/IT Water Purification System Lab

PURE AQUA SERVICE resin for replacement BINDER 6011-0077 BINDER reference: 6011-0077 For BINDER clim (more)atic chamber New material Year of manufacture: 2012

HANNA HI97733 Ammonia Photometer, up to 100.0 mg/L New equipment in its original packaging HI97733 c (more)omes with 2 measuring cuvettes, plastic stoppers and caps and batteries. Range: 1.0 to 100.0 mg/L (NH4+) Resolution: 0.1 mg/L Accuracy at 25°C: ±0.5 mg/L ±5% of reading Method: Adaptation of the “ASTM Manual of Water and Environmental Technology, D1426-92” method, Nessler method Light source: LED with 420 nm narrow bandwidth filter Light detector: Silicon photocell Batteries/Lifespan: 3 x 1.5 V AA / > 800 measurements without backlight On-demand storage: Up to 50 measurements for on-screen recall Auto-off: After 15 minutes of non-use / After 30 min of non-use before a measurement Dimensions/Weight: 142.5 x 102.5 x 50.5 mm / 380 g

This Purite Select BIO40/BP/IT Water Purification System was removed from a university lab where it  (more)was surplus to requirements. The unit is in reasonable cosmetic condition but has some marks from use. It powers up and the screen is clear. It will likely need servicing before it is used again. The UV lamp hours are at 6000. The forecast change date is 14/12/23. Filter replacement was due 22/01/21. DI pack replacement was due 22/01/21. It has not been tested further.

ELGA Purelab LA620 DV 35 Water Purification Unit Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition and powers on. We are unable to conduct further testing at our facility. Includes: - 1 x ELGA Sanitisation Block - LA567 - 1 x DI Cartridge Pack - 1 x ELGA Pretreatment Cartridge Part No. - LC140 Features: - Max Pressure inlet - 0.07/1 - Max Pressure Working - 0.07/1 - Serial No. - 620L2323233 - Version - PURELAB Option-S v21.01.

ELGA PURELAB Ultra IO MK2 Water Purifier Purification System This item was removed from a university (more) where it was surplus to requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. Also included are the following: 2 x Elga LabPure S1 Cartridges

Elga PureLab Option with DV35 Reservoir This item was removed from a university where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Jouan Refrigerated Centrifuge  Model - CR412 with 4750RPM Rotor & Inserts Lab This item was (more) removed from a university where it was surplus to requirement. It is in good cosmetic condition and powers on, however, when powered on the display reads '0000' and no controls are operable, thus preventing any testing from being conducted. Therefore, this item is sold as Spares/Repair.

Arctiko LR 650 +2C / +8C Upright Biomedical Refrigerator Refrigerant R290 Temperature Range 2°C - (more) 8°C Capacity 24.72 Cu.FT (700 Liters) Features - Superior performance and temperature stability - High-quality Carel digital controller - Data logger with Bluetooth and NFC interface - High / Low temperature warning alarm - Open door alarm - Power failure alarm (visual and acoustic) - LED inside light (refrigerators models) - Forced air ventilation - Port hole - UL61010 certification - Energy Star rating - 115V/60Hz power - Sizes available from 14.12 cu.ft. up to 49.44 cu.ft. The Arctiko LR 650 upright fridge offers the superior features required for biomedical applications. This model includes a high-quality Carel controller with Bluetooth connection as well as high/low temperature alarms and a built-in data logger.INCLUDED: The Arctiko LR 650 +2C / +8C Upright Biomedical Refrigerator includes: - Key for Door Lock - Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-3 interfaces: 2 x RS232, USB, Ethernet, 12 IN, 12 OUT (digital). It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.

Ohaus i-DF33XW5000C1L Defender 3000 Washdown Floor Scale, 5000 lb., 1 lb. Maximum Capacity 5000 lb.  (more)(2,500 kg) Readability 1 lb. (0.5 kg) Platform Size 4 x 4 ft. (1,219 x 1,219 mm) Features - Weighing, Checkweighing, Counting, Totalization - 7 Segment LCD with multicolor backlight - Internal power supply with power cord (included) or rechargeable battery (included) - Standard RS232 and optional USB Device or Ethernet - 304-grade stainless steel IP66 indicator, 5mm / 0.196in. fixed top plate, stainless steel platform, IP68 stainless steel junction box with side access, IP68 load cells, stainless steel ramp available - Four load cell mounted feet with self-swiveling ball-in-cup design, painted and stainless steel floor stands (available as accessories) The Ohaus Defender 3000 Floor Scales meet dry or washdown weighing needs in industrial and commercial use. Their high-quality construction is designed to minimize flexing under heavy loads for years of dependable performance. The indicator features a bright display that can change color when in check mode. Scale also includes counting and totalization modes. Stainless steel bases include IP68 loadcells for wet areas. Ramps and mounting plates are available. INCLUDED: The Ohaus i-DF33XW5000C1L Defender 3000 Washdown Floor Scale, 5000 lb., 1 lb. includes: - 2 x Eyebolts - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty