Yamato FP-103 1.5L High Performance Programmable Muffle Furnace

Yamato FP-103 High Performance Programmable Muffle Furnace

• Chamber & Materials:
• Internal capacity: 1.5 L (100 x 150 x 100 mm WxDxH)
• Chamber lined with alumina fiber insulation for energy efficiency and fast heating
• Alumina porcelain hot plate protects samples by a non-exposed heater design
• Exterior made of cold rolled steel plate with baked-on melamine resin finish

• Temperature Specifications:
• Operating temperature range: 100 to 1150°C
• Temperature control accuracy: ±1.0°C at 1150°C
• Temperature fluctuation: ±1.0°C at 1150°C
• Temperature distribution accuracy: ±4.0°C at 1150°C
• Temperature gradient: 14°C at 1150°C
• Time to reach maximum temperature: approximately 90 minutes

• Sensors and Heater:
• Uses long-life R-thermocouple sensors with high Rhodium content for corrosion resistance
• Heater: 1.1 kW iron-chrome wire type

• Control and Display:
• PID temperature control via microprocessor
• Digital temperature and timer settings via ▲/▼ keys
• Temperature display: orange 5-digit LED (setting), green 4-digit LED (actual) with 1°C resolution
• Timer range: 1 min to 99 hrs 59 min, selectable resolution
• Operating modes include fixed temperature, auto start/stop, quick auto stop, and programmable operations (up to 99 steps and 99 patterns with repeat)

• Safety Features:
• Self-diagnostic functions covering sensor errors, heater disconnections, triac shorts, relay failures
• Key lock function prevents unauthorized changes
• Independent and automatic overheat prevention devices
• Earth leakage breaker included
• Auto power failure recovery mechanism

• Additional Functions:
• Operation time accumulation up to 65,535 hrs
• Calendar and clock functions (24 hr display)
• Calibration offset adjustment
• Display of power consumption, CO₂ emissions, heater operation status
• User setting storage and recall

• Physical & Electrical:
• External dimensions: 376 x 404 x 515 mm (WxDxH)
• Weight: approximately 29 kg
• Power requirements: AC 115 V, 10 A (50/60 Hz) with plug
• Exhaust port: Ø20 mm at top, includes exhaust port cap

• Accessories (included and optional):
• Standard: exhaust port cap, fuse, furnace floor plate
• Optional: exhaust system, N₂ gas loading device with flow meter, temperature output terminal, time-up output terminal, sample tray, communication interfaces (RS232C and adapters), event output terminals, operation signal output terminal, furnace floor plate

This high-performance muffle furnace is engineered for long-lasting use in high-heat laboratory applications, emphasizing precise temperature control, sample protection, and comprehensive safety features.