53k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Yamato DX-302C Natural Convection Laboratory Oven 28L (115V)

UsedYamato ScientificHeating & coolingUnited States

From€2,616.02excl. VAT

In stock

Can't find what you're looking for?

Circulation Method
Natural Convection
Operating Temperature Range
Room Temp. +5°C to 300°C
Temperature Control Accuracy
±1°C (at 300°C)
Temperature Distribution Accuracy
±10°C (at 300°C)
Maximum Temperature Reaching Time
~45 min (Room temp. to 300°C)
All 29 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 29

Brands
Yamato Scientific
New/Used
Used
Circulation Method
Natural Convection
Operating Temperature Range
Room Temp. +5°C to 300°C
Temperature Control Accuracy
±1°C (at 300°C)
Temperature Distribution Accuracy
±10°C (at 300°C)
Maximum Temperature Reaching Time
~45 min (Room temp. to 300°C)
Interior Material
Stainless steel
Exterior Material
Electro-galvanized steel sheet with melamine resin baking finish
Heat Insulating Material
Glass wool
Heater
Iron-chrome wire heater 0.9 kW
Exhaust Port
33 mm I.D. x 2 pcs. (on top)
Temp. Controller
PID control by microprocessor
Temp. Setting Method
Digital setting by ▲▼ key
Temp. Display Method
Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer
1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation Function
Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional Function
Calibration off-set, Power failure compensation function, Key lock function
Heater Circuit Control
SSR Control
Sensor
K-thermocouple
Safety Device
Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal Dimensions W×D×H
300x310x300mm
External Dimensions W×D×H
400x440x630mm
Internal Capacity
28L
Shelf Plate With Standard Load
15kg/piece
Shelf Rest Step Number / Pitch
6 steps / 35mm
Power Source 50/60Hz
AC115V 9.5A (with plug) AC220V 4.3A (no plug, round terminal)
Weight
~23kg
Accessories
Stainless steel punching metal shelf plate 2pcs. / Shelf bracket 4pcs.

Product description

28L natural convection lab oven with PID control, 5–300°C range, ±1°C accuracy, and safety diagnostics.

Yamato DX-302C Natural Convection Laboratory Oven - 28 Liters / 1.0 cu.ft. capacity

  • Circulation Method: Natural convection (gravity convection)
  • Operating Temperature Range: Room Temp. +5°C to 300°C
  • Temperature Control Accuracy: ±1°C at 300°C
  • Temperature Distribution Accuracy: ±10°C at 300°C
  • Maximum Temperature Reaching Time: Approximately 45 minutes from room temperature to 300°C
  • Heating Element: 0.9 kW iron-chrome wire heater
  • Temperature Controller: Digital PID controller via microprocessor
  • Temperature Setting: Digital input via ▲▼ keys
  • Temperature Display: Green LED for measured temp, red LED for set temp
  • Timer Range: 1 min to 99 hrs 59 min; extended to 999 hrs 50 min
  • Operation Modes: Fixed temperature, Quick auto stop, Auto stop, Auto start
  • Additional Functions: Calibration offset, Power failure compensation, Key lock
  • Safety Features:
  • Temp sensor error detection
  • Temp input circuit error
  • Auto overheat prevention
  • Hydraulic independent overheat protection
  • Electric leakage breaker with overcurrent protection
  • Self-diagnostic functions
  • Internal Dimensions (W×D×H): 300 × 310 × 300 mm
  • External Dimensions (W×D×H): 400 × 440 × 630 mm
  • Internal Capacity: 28 Liters
  • Interior Material: Stainless steel
  • Exterior Material: Electro-galvanized steel with melamine resin baking finish
  • Insulation: Glass wool
  • Exhaust Ports: Two 33 mm I.D. ports located on top
  • Sensor Type: K-type thermocouple
  • Heater Circuit Control: SSR (Solid State Relay) control
  • Load Capacity per Shelf: 15 kg
  • Shelf Positions: 6 steps with 35 mm pitch
  • Power Supply Options: AC115V 9.5A (with plug) or AC220V 4.3A (no plug, round terminal)
  • Weight: Approximately 23 kg
  • Accessories Included: Two stainless steel punched metal shelf plates, four shelf brackets

This oven is designed for reliable, precise drying and temperature control in laboratory environments, with emphasis on safety and operational simplicity.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 6 November 2026