52k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Yamato DR201-115V Programmable High Temperature Natural Convection Oven, 13.75L

UsedYamato ScientificHeating & coolingUnited States

From€5,590.68excl. VAT

In stock

Can't find what you're looking for?

System
Natural convection
Temp. Control Range*
300~700°C
Temp. Control Accuracy*
±5°C (at 700°C)
Temp. Fluctuation*
10°C (at 700°C)
Temp. Distribution Accuracy*
±25°C (at 700°C)
All 34 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 34

Brands
Yamato Scientific
New/Used
Used
System
Natural convection
Temp. Control Range*
300~700°C
Temp. Control Accuracy*
±5°C (at 700°C)
Temp. Fluctuation*
10°C (at 700°C)
Temp. Distribution Accuracy*
±25°C (at 700°C)
Temp. Gradient*
30°C (at 700°C)
Temp. Rise Time*
~70 min. (Room temp. +5°C~700°C)
Temp. Fall Time*
~150 min. (700°C to 300°C)
Interior Material
Stainless steel sheet metal
Exterior Material
Chromium-free electrogalvanized steel sheet, baked-on finish
Heat Insulating Material
Ceramic fiber rock wool
Heater Type / Capacity
Iron-chrome wire heater / 1.3kW
Temp. Controller
PID control by microcomputer
Temp. Setting Method
Digital setting by operation menu key and ▲/▼ keys
Temp. Display
Temp. reading display: Green 4 digit LED digital display / Temp. setting display: Red 4 digit LED digital display
Timer Function
0 to 99 hrs 59 mins. and 100 hrs. to 999 hrs 50min.
Timer Resolution
1 minute increments under 99 hours and 59 minutes,10 minutes after 100 hours.
Wait Function
Timer wait function (ON/OFF setting)
Operation Modes
Fixed temperature, program, program auto start, auto start, quick auto stop, auto stop
Program Modes
6 patterns (PrG1: 30 steps, PrG2-3: 15 steps, PrG4-6: 10 steps) step weight function, repeat function, step hold function, step skip function
Additional Functions
Calibration offset, keypad lock, auto resume mode select
Sensor
K thermocouple (W sensor)
Safety Device
Self-diagnostic functions (automatic overheat prevention, temp. sensor failure, heater disconnection, SSR short circuit, main relay failure, memory error, internal comm. error, abnormal temp. reading), overcurrent ELB, overheat prevention device
Internal Dimension
250 x 250 x 220 mm (WxDxH)
External Dimension
520 x 443 x 612 mm (WxDxH) (protrusions excluded)
Internal Capacity
13.75L
Shelf Load Capacity
15 kg. / pc. Total load capacity 30 kg.
Shelf Rest Step Number
3 steps
Shelf Rest Pitch
33mm
Power Source (60Hz)
AC115V 11.5A (with plug)
Weight
~36kg
Shelf Plate
Perforated stainless steel plate

Product description

Programmable natural convection oven with 300–700°C range, PID control, 13.75L volume, and multiple safety features.

Yamato DR201-115V Programmable High Temperature Natural Convection Oven

  • Temperature Range: 300 to 700°C
  • Temperature Control: PID microcomputer controller with digital setting via operation menu and ▲/▼ keys
  • Temperature Accuracy: ±5°C at 700°C
  • Temperature Fluctuation: 10°C at 700°C
  • Temperature Distribution Accuracy: ±25°C at 700°C
  • Temperature Gradient: 30°C at 700°C
  • Heating and Cooling Times:
  • Rise time: ~70 min (room temp +5°C to 700°C)
  • Fall time: ~150 min (700°C to 300°C)
  • System: Natural convection with iron-chrome wire heater, 1.3 kW capacity
  • Interior Material: Stainless steel sheet metal
  • Exterior Material: Chromium-free electrogalvanized steel, baked finish
  • Insulation: Ceramic fiber rock wool
  • Timer: Ranges from 0 to 999 hrs 50 min, resolution 1 min under 99 hrs 59 min, then 10 min increments
  • Operation Modes: Fixed temperature, programming with up to 6 patterns and varying step counts, program auto start, quick auto stop, auto stop
  • Additional Functions: Calibration offset, keypad lock, auto recovery after power failure
  • Sensor: K-type thermocouple (W sensor)
  • Safety Features:
  • Self-diagnostic for overheat, sensor failure, heater disconnection, SSR short circuit, relay failure, memory error, communication error, abnormal temp reading
  • Overcurrent ELB and overheat prevention device
  • Capacity: 13.75 liters
  • Dimensions:
  • Internal: 250 x 250 x 220 mm (WxDxH)
  • External: 520 x 443 x 612 mm (WxDxH, excluding protrusions)
  • Shelf:
  • 2 perforated stainless steel plates included
  • 3 step shelf rest, 33 mm pitch
  • Load capacity: 15 kg per shelf, 30 kg total
  • Power Supply: AC 115 V, 11.5 A, 60 Hz (plug included)
  • Weight: Approximately 36 kg

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 7 November 2026