53k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Yamato DP-83C Large Vacuum Oven, 512L Capacity, Floor Model

UsedYamato ScientificProcess ovens / furnacesUnited States

From€29,951.19excl. VAT

In stock

Can't find what you're looking for?

Method
Decompression • chamber wall heating
Operating Temp. Range
40~200°C
Operating Vacuum Range
101~0.1kPa (760~1Torr)
Temp. Adjustment Accuracy
±1.0°C (at 200°C)
Interior
Stainless steel plate
All 33 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 33

Brands
Yamato Scientific
New/Used
Used
Method
Decompression • chamber wall heating
Operating Temp. Range
40~200°C
Operating Vacuum Range
101~0.1kPa (760~1Torr)
Temp. Adjustment Accuracy
±1.0°C (at 200°C)
Interior
Stainless steel plate
Exterior
Cold rolled steel plate with chemical proofing coating
Insulating Material
Glass fiber
Heating Method
Decompressed chamber wall direct heating
Heater Power
6.5kW
Observation Window
Toughened glass + resin protection panel
Vacuum Gauge
Pointer type, -100~0kPa
Vacuum Pump Installation Room
Yes
Temp. Control
3 segments PID
Temp. Setting
Use specialized function menu key and up/down key to set
Temp. Display
Measured temp. display: green 4-digit LED digital display
Timer
1min-99 hr 59 min and 100 hr-999 hr 50 min (attached with timing wait function)
Operation Function
Fixed temp. auto start, auto stop, program operation
Program Mode
Program operation 3 segments 30 steps (30 steps×1, 15 steps×2, 10 steps×3)
Additional Function
Deviation correction, key lock, power outage compensation
Heater Circuit Control
SSR driving
Sensor
K thermocouple (temp. controller and overheat protector)
Safety Device
Self-diagnosis circuit (abnormal temp. sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, EBL to prevent overcurrent, key lock, etc.
Internal Dimensions W×D×H
800×800×800 mm
External Dimensions W×D×H
1020×1020×1850 mm
Internal Capacity
512L
Air Exhaust Port
NW40 flange
Air Suction Port
Rc 3/8
Power Source (50/60Hz) Rated Current
AC220V 31.5A (no plug, round terminal)
Weight
~450kg
Accessories
Stainless steel punching plates, 2 pcs.
Optional
Shelf plate, vacuum pump, N₂ introduction device, recorder, alarm indicator lamp (stand-by/running/malfunction), external communication (RS485), temp. output terminal (4~20mA), Output terminal for external alarm, time up output terminal

Product description

512L large vacuum oven with 40–200°C range, 6.5kW heating, PID control, and advanced safety features.

Yamato DP-83C Large Vacuum Oven designed for drying large parts with vacuum and decompressed chamber wall heating:

  • Vacuum system:
  • Built-in vacuum pump installation room
  • Quick connect/disconnect vacuum pipes for pump maintenance
  • Improved exhaust system shortens vacuum reach time
  • Vacuum gauge: Pointer type, -100 to 0 kPa (760 to 1 Torr)
  • Temperature control:
  • Operating range: 40 to 200°C
  • Temp. adjustment accuracy: ±1.0°C (at 200°C)
  • Heating method: Decompressed chamber wall direct heating
  • Heater power: 6.5 kW
  • Control: 3-segment PID with K thermocouple sensor
  • Display: Green 4-digit LED digital temperature display
  • Timer: 1 min–999 hr 50 min with timing wait function
  • Program operation: 3 segments, up to 30 steps (various step configurations)
  • Additional functions: Deviation correction, power outage compensation, key lock
  • Construction:
  • Interior: Stainless steel plate
  • Exterior: Cold-rolled steel with chemical-proof coating
  • Insulation: Glass fiber
  • Observation window: Toughened glass with resin protection panel
  • Safety features:
  • Self-diagnostics: Abnormal temp. sensing, heater disconnection, SSR short circuit detection
  • Overheat protector and ELB to prevent overcurrent
  • Key lock for operation security
  • Dimensions and capacity:
  • Internal: 800 × 800 × 800 mm
  • External: 1020 × 1020 × 1850 mm
  • Internal volume: 512 liters
  • Weight: Approx. 450 kg
  • Ports and connections:
  • Air exhaust port: NW40 flange
  • Air suction port: Rc 3/8
  • Power: AC 220V, 31.5A, 50/60Hz
  • Accessories and optional items:
  • Included: 2 stainless steel punching plates
  • Optional: Shelf plate, vacuum pump, nitrogen introduction device, recorder, alarm lamp (stand-by/running/malfunction), RS485 communication, 4–20 mA temperature output, external alarm and time-up output terminals

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 4 November 2026