58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

Yamato DH-1032 Fine Oven 1000L, 220V 3 Phase

UsedYamato ScientificHeating & coolingUnited States

€17,478.15excl. VAT

In stock

Can't find what you're looking for?

System
Forced air circulation and ventilation
Operating Temp. Range
Room temp. +15°C~200°C
Temperature Fluctuation
±0.5°C (at 200°C)
Temperature Slope
15°C (at 200°C)
Temperature Controller
PID Z control
All 23 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 23

Brands
Yamato Scientific
New/Used
Used
System
Forced air circulation and ventilation
Operating Temp. Range
Room temp. +15°C~200°C
Temperature Fluctuation
±0.5°C (at 200°C)
Temperature Slope
15°C (at 200°C)
Temperature Controller
PID Z control
Temp Setting Method
Digital setting with ▲▼ keys
Timer
0 min~99 hrs 59 min (Resolution: 1 minute or 1 hour)
Operation Function
Fixed temperature operation, Program operation (maximum 99 steps, up to 99 patterns, repeat operation function) Duration/time select timer operation function (fixed temperature operation, auto start/auto stop/quick auto stop, program operation auto start)
Additional Functions
Accumulated Power on and Operation Time (up to 65,535 hours); Calendar Time (24 hours); Calibration Offset; Monitor Display of Accumulated Power Consumption, Total CO₂ Emission, and Heater operating Output; Power Recovery Mode; User Settings Save and Restore Function; Fan Speed Setting Function
Sensor
K-thermocouple (double sensor)
Heater
Stainless steel pipe heater with a fan
Fan Motor
Stainless steel axial flow fan (capacitor motor: 20W), Two motors used for Model 1032
Cable Port
I.D. φ30mm (rear)
Heat Insulator
Glass wool
Other Additional Structure
Exhaust damper (manual operation)
Safety Device
Self-diagnostic functions (temp. sensor error, heater disconnection, SSR short-circuit, automatic overheat prevention), door switch, fan failure detection, key lock, independent overheat protection, electric leakage breaker with over current protection
Power Supply 50/60 Hz
3 phase AC220V 17A (no plug, round terminal)
Internal Dimensions WxDxH
1000 x 1000 x 1000 mm
External Dimensions WxDxH
1700 x 1215 x 1530 mm
Internal Capacity
1,000L
Weight
~450kg

Product description

1000L fine oven with PID control, forced air circulation, exhaust damper, and precise temperature regulation up to 200°C.

Yamato DH-1032 Fine Oven

  • Capacity: 1,000 L internal volume (1000 x 1000 x 1000 mm)
  • Power Supply: 3 phase AC 220V, 17A (50/60 Hz), no plug, round terminal
  • Temperature Range: Room temp. +15°C to 200°C
  • Temperature Control: PID Z control with digital ▲▼ key settings
  • Temperature Stability: ±0.5°C fluctuation at 200°C; slope 15°C at 200°C
  • Operation Modes: Fixed temp, program operation (up to 99 steps, 99 patterns), auto start/stop, timer 0 min to 99 hrs 59 min
  • Air Circulation: Forced air circulation and ventilation with stainless steel axial flow fans (two 20W capacitor motors)
  • Heating: Stainless steel pipe heater with fan
  • Sensors: Dual K-type thermocouple sensors
  • Exhaust: Manual exhaust damper for quick exhaust and cooling
  • Safety Features: Self-diagnostics (temp sensor error, heater disconnection, SSR short-circuit), door switch, fan failure detection, key lock, independent overheat protection, electric leakage breaker with overcurrent protection
  • Additional Functions:
  • Power consumption and CO₂ emissions monitoring
  • Calibration offset and accumulated operation time (up to 65,535 hrs)
  • Fan speed adjustable
  • Power recovery mode
  • User settings save/restore
  • Calendar time (24 hrs)
  • Construction: Glass wool insulation; cable port (φ30 mm rear)
  • Dimensions: External 1700 x 1215 x 1530 mm
  • Weight: Approximately 450 kg

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026