53k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Yamato DF-612 Fine Oven 216L with Forced Air Circulation and Programmable Control

UsedYamato ScientificEnvironmental chambersUnited States

From€5,912.84excl. VAT

In stock

Can't find what you're looking for?

System
Forced air circulation and ventilation
Operating Temp. Range*¹
Room temp. +15~260°C
Temp. Adjustment Accuracy*¹
± 0.1°C (at 260°C)
Temp. Distribution Accuracy*¹
± 1.5°C (at 260°C)
Max. Temp. Reaching Time*¹
~40 min. (reaches 260°C when setting at 270°C)
All 34 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 34

Brands
Yamato Scientific
New/Used
Used
System
Forced air circulation and ventilation
Operating Temp. Range*¹
Room temp. +15~260°C
Temp. Adjustment Accuracy*¹
± 0.1°C (at 260°C)
Temp. Distribution Accuracy*¹
± 1.5°C (at 260°C)
Max. Temp. Reaching Time*¹
~40 min. (reaches 260°C when setting at 270°C)
Temp. Control System
PlD Z control
Temp. Setting Method
Digital setting by ▲/▼ key
Temp. Display Method
Setting temp. display: Digital display by 5-digit orange LED (resolution: 1°C) Temp. display: Digital display by 4-digit green LED (resolution: 1°C)
Other Indication
LED indicates temperature patterns for heating/stabilizing/cooling
Timer Display Range
Fixed value operation for 1 min. to 99 hrs. 59 mins. 24 hr time system: clock operation
Operation Functions
Fixed temperature, Auto start, Auto stop, Program operation: up to 99 steps, 99 patterns, repeat operation function
Additional Functions
Variable air flow function, power on time and timer accumulation monitor (up to 65535 hrs), calibration offset, power consumption display, total CO₂ emissions and heat operation output, power failure recovery mode, setting data backup and recovery
Sensor
K thermocouple (double sensor)
Heater Insulator
SUS pipe heater with fan
Heater Capacity
3.0 kW
Blower Fan (Motor)
Axial fan (capacitor type motor 20W)
Cable Port
I.D. 33 mm x 1 pc. (rear)
Interior / Exterior Material
Stainless steel/ Chrome-free electro-galvanized steel sheet metal, chemical-proof baked on finish
Door
Single swing (left side)
Exhaust Port
Automatic exhaust damper I.D. 80 mm (rear panel)
Heat Insulator
Glass wool
Heater Circuit Control
Triac with zero-crossing method
Earth Leakage Breaker
20A
Safety Device
Self-diagnostic functions (temp. sensor error, TRIAC short circuit, heater disconnection, SSR short-circuit, fan motor failure, main relay contact damage and overheating), key lock function, door switch (door open, fan motor and heater circuit OFF / door close: fan motor and heater circuit ON), independent overheat prevention (temp. setting range: 0~300°C for DF and 0~400°C for DH)
Internal Dimensions*² W×D×H
600×600×600 mm
External Dimensions*² W×D×H
1200×780×1000 mm
Internal Capacity
216L
Shelf Max. Load
~30kg / pc.
Shelf Support Qty. / Pitch
9 steps / 60mm
Power Source 50/60 Hz Single Phase
AC220V 17.5A (no plug, round terminal)
Weight
~156 kg
Shelf / Bracket
3 pcs / 6 pcs

Product description

Programmable 216L fine oven with precise temp control (±0.1°C), forced air circulation, and safety diagnostics.

  • Temperature range: Room temperature +15 to 260°C
  • Temperature control system: PID Z control with digital ▲/▼ setting keys
  • Temperature accuracy: ±0.1°C at 260°C; distribution ±1.5°C at 260°C
  • Heating system: 3.0 kW SUS pipe heater with axial blower fan (20W motor)
  • Operation: Programmable (up to 99 steps and 99 patterns), fixed temperature, auto start/stop, repeat function
  • Air flow: Adjustable variable air speed for uniform temperature distribution
  • Display: Orange 5-digit LED for set temperature; green 4-digit LED for actual temperature
  • Timer: 1 minute to 99 hours 59 minutes, supports clock operation and power failure recovery
  • Safety features:
  • Self-diagnosis (temperature sensor errors, heater disconnection, SSR short circuit, fan motor failure, TRIAC faults)
  • Overheat protection with independent overheat prevention
  • Earth leakage breaker (20A)
  • Key lock and door switch disabling heater/fan when door opens
  • Exhaust system: Automatic exhaust damper (80 mm ID) enabling rapid chamber cooling
  • Housing: Interior stainless steel; exterior chrome-free electro-galvanized steel with chemical-proof baked finish
  • Dimensions:
  • Internal: 600 × 600 × 600 mm
  • External: 1200 × 780 × 1000 mm
  • Capacity: 216 liters with shelf max load of ~30 kg, 9 shelf support steps at 60 mm pitch
  • Power requirements: AC 220V, 17.5A, single phase, 50/60Hz (no plug, round terminal)
  • Additional functions: Power consumption and CO₂ emission display, cumulative timer (up to 65535 hours), calibration offset adjustment, data backup and recovery, cable port (33 mm ID)
  • Weight: Approximately 156 kg
  • Door: Single swing, left side
  • Heater circuit control: Triac zero-crossing method

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 31 October 2026