Ohaus MB23 Moisture Analyzer

A&D Weighing MS-70 Moisture Analyzer Capacity 71 g Weight Resolution 0.0001g Moisture Content A (more)ccuracy 0.05 % (Over 1 g) 0.01% (Over 5 g) Features - 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision - 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL - Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible - Safe & Reliable Design - Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently - Self Check functions such as defect check function along with temperature control checks have you covered - Progress window allows easy visibility to see heating process through translucent window - Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer - Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy - Data memory function allows for test results to be stored and recalled or outputted for additional analysis - GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs The A&D Weighing MS-70 Moisture Analyzer is a top-tier solution designed for labs requiring the highest level of precision and versatility in moisture analysis. Featuring four selectable heating modes—standard, quick, step, and ramp—the MS-70 offers customizable heating curves to perfectly match the unique requirements of diverse sample types, ensuring accurate and repeatable results every time. With five distinct measurement programs (Standard, Automatic, Quick, Timer, and Manual), users can easily select the ideal method for each process, maximizing efficiency and adaptability. The large, easy-to-read VFD display presents all critical information—moisture change, set values, action status, and data numbers—clearly, facilitating smooth operation. The MS-70’s ergonomic design, complete with safety-oriented handles and a progress-view window, enhances workflow by reducing handling errors and preventing accidental burns. Self-check functions further ensure reliability by continuously monitoring defect and temperature controls. Data management is streamlined with the RS-232C interface and WinCT–Moisture software, making data export, analysis, and GLP/GMP/GCP/ISO-compliant reporting effortless. The memory function stores up to 20 unique measurement conditions and 100 test results, allowing for quick setup recall and reliable documentation. Designed with high-performance halogen heating technology, capable of detecting even slight moisture drops (under 1% with PET samples), the MS-70 promises accuracy, ease, and safety, backed by dependable long-term performance. Backed by a comprehensive 5-year warranty, the MS-70 Moisture Analyzer offers lasting reliability and peace of mind for your lab's moisture analysis needs. INCLUDED: The A&D Weighing MS-70 Moisture Analyzer includes: - 20 Sample Pans - Pan Support - Pan Handle - Tweezers - Spoon - Glass Fiber Sheet - RS-232C Cable - Display Cover - Dust Cover - Breeze Break Ring - Halogen Lamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? With the E2R Moisture Analyzer module, you can: read moisture analyzer data and store it in the MS SQL database; due to the possibility of online operation, monitor the parameters of currently running drying processes from a computer; display information about current measurements as well as the status and outcome of the drying process in real time; generate online graphs in relation to drying time; have access to the reports generated by moisture analyzers; operate and monitor up to 16 moisture analyzers; automatically start the connection of the moisture analyzers with the database after the computer is switched on (operation in system service mode); connect the moisture analyzers to the Ethernet network using an RS232 multiport card and an Ethernet/RS232 converter; filter dates and records, as well as group and sort orders and individual measurements; generate archived reports and graphs; define the permission levels for specific operators; select the language of each of the system components; customize the program’s graphical interface and modify reports and graphs; work over an Ethernet network.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y.IC Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y.IC Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y.IC Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Ohaus MB92 Moisture Analyzer Maximum Capacity 90 g Readability Moisture Content 1 mg / 0.01% Recomme (more)nded Moisture Content 0.5 % to 100 % Features - 90g capacity with 1 mg/0.01% readability for precise measurements - Carbon fiber heating for rapid and even heat distribution - 4.3” capacitive touch screen with full-color display for easy navigation - Drying profiles include Ramp, Standard, Step, and Fast for flexibility - ID management supports Sample Name, Sample ID, and Batch ID - Temperature range of 40°C to 200°C for various testing needs - Multi-color status light provides at-a-glance progress updates - Shut-off options include Timed, Manual, Auto, and custom settings - Live drying curve and on-screen instructions for real-time monitoring - Stores up to 200 results and 20 methods for high-throughput use - Durable PBT housing with tool-free cleaning for easy maintenance Robust and durable with the new carbon heating technology and an upgraded full color capacitive touchscreen. Flexible drying profiles, and methods provide versatile method creation, with enhanced password protection ensures data security. The full glass panel and tool-free heating chamber make cleaning easy, ideal for both laboratory and production floor use. The Ohaus MB92 Moisture Analyzer combines precision and versatility for demanding moisture analysis applications. With a maximum capacity of 90g and readability of 1 mg/0.01%, the MB92 ensures accurate measurements across a moisture content range of 0.5% to 100%. Its advanced carbon fiber heating technology delivers rapid and consistent heat distribution, while the full-color 4.3” capacitive touchscreen offers intuitive navigation and control. Designed for flexibility, the MB92 features four drying profiles (Ramp, Standard, Step, Fast) and multiple shut-off criteria, including Timed, Manual, Auto, and custom settings. Enhanced ID management supports Sample Name, Sample ID, and Batch ID, enabling efficient sample tracking. Additionally, the device’s durable PBT housing and tool-free heating chamber assembly make maintenance straightforward. Capable of storing up to 200 results and 20 methods, the MB92 is ideal for high-throughput environments that demand robust performance and easy operation. INCLUDED: The Ohaus MB92 Moisture Analyzer includes: - 3.5 in. Pan - In-Use Cover - Box, Aluminum Sample Pans - Pan Holder - Pan Handle - 5 Glass Fiber Pads - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Strength and endurance at a great price! The Catapult 5000 scales are ideal for shipping and receivi (more)ng goods. It combines utility and economy. Low profile, sturdy, heavy duty stainless steel platform, an easy-to-read LED screen and rechargeable battery make it ideal for small businesses, correspondence departments, warehouses and even industrial environments. - Built to last with a large stainless steel platform - Bright LED display allows you to use the scale in any lighting conditions - Various data transfer and power supply options for better use Application methods Weighing: calculation of the weight of the items in the unit of measurement selected. Accumulation: weight totalization, count and percentage. Calculate the total accumulated weight, the count or the percentage of the singles articles. Dynamic Weighing: Weighing of an unstable load. The balance determines the average of several weighings made in a given period of time. Display lock: locks the last stable weigh manually or automatically on the scale display. It is activated by setting the time interval in Dynamic Weighing mode to zero. Available models: Applications Weighing, dynamics / display hold, accumulation Display Light-emitting display (LED) Operation AC adapter (included) and rechargeable battery (not included) Communication RS232 (available as an accessory) Structure ABS armor, stainless steel platform, mounting bracket, painted steel frame Construction features Low profile design, hardware configuration lock switch, selectable lifespan calibration points, mid level, auto zero tracking, auto power off Accessories RS232 kit: 30101019 Protective hood: 30101017 Impact printer SF40A: 30064202 Lead acid battery, 6V4AH: 30251812

VACUUBRAND ME 1 Diaphragm Pump Ultimate Vacuum 100 mbar / 75 torr torr Maximum Pumping Speed 0.5 cfm (more) at 60Hz Number of Heads/Stages 1/1 Features - Convenient, quick and simple to use due to the new top mounted power switch - Whisper quiet and very low vibration - Requires minimal benchtop space - Maintenance-free drive system and proven long diaphragm life - Wetted materials: PTFE, aluminum Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, waste water control and other analytical processes. The ME 1 diaphragm pump offers a compact, high performance and easy-to-use solution which is perfect for single port filtrations. These oil-free diaphragm pumps provide a well-proven and extraordinarily long diaphragm life time with typically 15,000 operating hours. The functional, space saving and innovative design with visible top mounted power switch ensures convenient and quick operation for day to day lab work. The PTFE diaphragm and valves are rugged and provide high chemical resistance. An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and ultimate vacuum. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications for the ME 1 are aqueous filtrations. With filtration at 100 mbar, 90% of atmospheric pressure is available as a driving force. If a certain pressure difference must not be exceeded, an optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and ultimate vacuum. For working with aggressive solvents a chemistry version (ME 1C) is available. INCLUDED: The VACUUBRAND ME 1 Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets The Eppendorf S-4-72 Swing Bucket Rotor with  (more)250ml Buckets, (Catalog #: 5804746007) is a medium capacity swing-bucket rotor with speeds up to 4,200 RPM and a maximum RCF of 3,234 x g. The S-4-72 Buckets can accept a broad range of adapters to handle all common tube formats from 0.2ml to 250ml. This rotor is designed for use with the Eppendorf 5804/R and 5810/R Centrifuges. The Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets are in their original box and in new condition. (Please Note: The adapters pictured above are NOT INCLUDED. Please refer to the Additional Product Accessories section above if you may require adapters). INCLUDED: The Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets includes: - S-4-72 Swing Bucket Rotor - 4 x 250ml Round Buckets - Full 1 Year Parts and Labor Warranty Eppendorf S-4-72 Swing Bucket Rotor with 250ml Buckets SpecificationsMaximum Speed4,200 RPMMaximum RCF3,234 x gMaximum Capacity4 x 250mlRadius16.4 cmCentrifuge CompatibilityEppendorf 5804/R and 5810R CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Boekel 14458 Round Water Bath The Boekel 14458 Round Water Bath is manufactured from brushed stainle (more)ss steel for corrosion resistance. This bath is to be used with a heater. The Boekel 14458 Round Water Bath is supplied with 7 concentric rings for configurability and has a diameter of 20 cm (8"), and depth of 7 cm (2-3/4"). INCLUDED: The Boekel 14458 Round Water Bath includes: - 7 Concentric Rings - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty