MPW Angle Rotor 11461 18000rpm 24x1,5/2ml for Centrifuge Zentrifuge 260,251,352

Lot Of Heraeus Centrifugal Rotor Buckets And Tube Holder Bucket Inserts Lab These items were removed (more) from a university lab where they were surplus to requirement. All items are in good cosmetic condition but have not been tested. The items included are as follows: - 4 x Heraeus #7570 E Rotor Buckets (max capacity of 600g) - 3 x Heraeus #8030 Rotor Buckets (max capacity of 510g) - 3 x Tube Holders For 15-25ml Tubes - 4 x Tube Holders 50ml Tubes

Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 Eppendorf 7x50ml Buckets for A-4-81 Rotor (more), Cat # 022638614. This is a 4 piece set, and the adapters are new in the packaging. The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 are for the A-4-81 Rotor in the 5810/R Centrifuges. INCLUDED: The Eppendorf 7x50ml Buckets for A-4-81 Rotor, Cat # 022638614 includes: - Full 6 Month Parts and Labor Warranty

Eppendorf S-4-104 Swing Bucket Rotor with Buckets, Cat # 5820740000 The Eppendorf S-4-104 Swing Buck (more)et Rotor with Buckets, Cat # 5820740000, is a centrifuge rotor designed for use with the Eppendorf 5810/R Series centrifuges. This rotor has a maximum speed of 3,900 RPM and a maximum relative centrifugal force (RCF) of 3,214 x g. It can accommodate a maximum capacity of up to 4 x 750ml, making it suitable for a range of applications in biological, biochemical, and clinical research. Overall, the Eppendorf S-4-104 Swing Bucket Rotor with Buckets is a reliable and versatile centrifugation accessory that is ideal for high-throughput sample processing in laboratories. INCLUDED: The Eppendorf S-4-104 Swing Bucket Rotor with Buckets, Cat # 5820740000 includes: - 4 Round Buckets - Full 1 Year Parts and Labor Warranty Eppendorf S-4-104 Swing Bucket Rotor with Buckets, Cat # 5820740000 SpecificationsMaximum Speed3,900 RPMMaximum RCF3,214 x gMaximum Capacity4 x 750mlRadius18.9 cmCentrifuge CompatibilityEppendorf 5810/R Series

Thermo Scientific 75003617 Microplate Buckets for TX-750 Rotor The Thermo Scientific 75003617 Microp (more)late Buckets are designed to be used with the TX-750 Swing Bucket Rotor, and have a maximum speed of 4,700 RPM and a maximum RCF of 4,817 x g. These buckets are capable of holding up to 4 x 4 microplates, making them ideal for high-throughput applications such as sample preparation or processing. The buckets are made from high-quality materials that can withstand the rigors of high-speed centrifugation, ensuring reliable performance and consistent results. The Thermo Scientific 75003617 Microplate Buckets are compatible with a variety of microplate types, including standard and deep-well formats, and are easy to load and unload. These buckets are a reliable choice for laboratories looking to streamline their sample preparation or processing workflows, and are suitable for a wide range of applications, including genomics, proteomics, and drug discovery. With their high-speed capabilities and reliable performance, these microplate buckets are an essential tool for any high-throughput laboratory. INCLUDED: The Thermo Scientific 75003617 Microplate Buckets for TX-750 Rotor includes: - Set of 4 x 75003617 Microplate Buckets - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003617 Microplate Buckets for TX-750 Rotor SpecificationsMaximum Speed4,700 RPMMaximum RCF4,817 x gMaximum Capacity4 x 4 MicroplatesMaximum Radius19.5 cmRotor CompatibilityTX-750 Swing Bucket RotorDownloadsTechnical Specification Download Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Powertecnique Uninterruptable Power Supply UPS ARGO 60/MM 0 & Battery Box was removed  (more)from a university lab where it was surplus to requirements. This was last serviced december 2019. We understand they were in use until at least 2021, but may have been offline for some time so it is possible the batteries have failed or do not perform well. The UPS powers up but was not tested further. Both units are in reasonably good cosmetic condition with some marks from use. Included are; 1 x Uninterruptable Power SupplyUPS ARGO 60/MM 0PN - UTO6060035D5 1 x Battery BoxBB 216-7PN - ACCMO606NI-01

VACUUBRAND ME 16 NT Diaphragm Pump Ultimate Vacuum 70 mbar Max. pumping speed at 60 Hz 9.6 cfm Num (more)ber of Heads/Stages 8/1 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Whisper quiet - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs Diaphragm pumps are an excellent solution for continuous, oil-free evacuation and pumping of gases. The one-stage design provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All parts in contact with pumped media are made of aluminum and selected plastics allowing a wide range of applications for non-corrosive gases. The highly flexible, fabric-reinforced double diaphragms made of FKM are ideal for extended operating life. These pumps are particularly powerful and offer large volume flow. The eight-cylinder pump ME 16 NT features exceptionally high pumping speed, low vibration and a very compact design with smooth and easy-to-clean surfaces. Large one-stage diaphragm pumps are an excellent choice for continuous, oil-free pumping of large amounts of gases. Typical applications are vacuum ovens and in general evacuation and pumping of non-corrosive gases. They are also excellent for very fast evacuations down to modest vacuum levels.INCLUDED: The VACUUBRAND ME 16 NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Microcentrifuge Centurion Scientific C2012. Speed of 500 to 12,000 rpm (13.500 g). Timer 0 to 99 min (more). Brushless Motor, maintenance free. Chamber of stainless steel and alloy structure. Sensors for imbalance, overspeed and warming. Does NOT include rotor (can be purchased separately).

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW