Lab Oven STF-F 52 FALC

COMBISTORAGE 3 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 stainless steel shelves - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

264 x Laboratory Trousers & Tunics - Pool Undersuits All items are brand new in their original p (more)ackaging. Lab Trousers Sizes are as follows: 4 - 556 - 778 - 8810 - 2211 - 22 Lab Tunic Sizes are as follows: 100 - 55108 - 77116 - 88124 - 22140 - 22

Milestone Ethos plus 2 Microwave Solvent Extraction Labstation This system was removed from a univer (more)sity where it was surplus to requirement. All units are in good cosmetic condition, with the primary unit (Milestone Ethos plus 2) and PC Set-Up turning on, however, there is no power in the LabTerminal 800 Controller. The system is sold for spares/repairs. -1x Milestone Microwave Laboratory Systems LabTerminal 800 Controller1x easywave chip card for the controllerS/N- 0205722 -2x Rotor' for microwave - Relevant vessels and safety shields for rotors -2x ATC-FO sensors for microwave -2x Torque wrenches for rotor -2x Extraction Pipes 1x Monitor (IIyama Prolite B2206WS) and Dell Tower Optiplex GX620Includes: Pipette tracker v3.3 Software

Armfield PCT Process Control Teaching System Lab This system was removed from a university where it  (more)was surplus to requirement. All units are in good cosmetic condition and power on independently, it has not been tested as a full system. The lab confirmed it was in full working order prior to removal. Included are; -Armfield PCT-9 Process System (Powers on)Fair cosmetic condition -Armfield Pressure Control AccessoryFair cosmetic condition -Armfield PCT 13 Temperature control module (not powering on)Poor cosmetic condition -Armfield Process Controller (Powers on)Fair cosmetic condition

MAS.1 R device is an electromagnetic weighing module of high resolution, equipped with R touch panel (more) featuring 5.7" display. The module is intended to be integrated into customer-owned weighing system. The compact design and integrated electronics make it possible to adapt the module into customer's technological line or to install it inside customers' device. In order to reduce the influence of ambient conditions on the measurement result which is a cause high measurement accuracy, it is recommended to install the module inside a draft shield for example. The module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.