Lab Oven STF-F 240 FALC

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

LABORATORY OVEN SLN SMART POL-EKO SLN - NATURAL AIR CONVECTION The SLN series laboratory ovens are d (more)esigned to reach high temperatures, up to 300 °C. Available from 15 to 245 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLN SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLN SMART SERIES The seven models of the SLN series cover most of your needs: from mini stoves to the 245 liter internal volume model. For larger volumes, look at the SLW series stoves. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

PacBio Sequel II Sequencing System Lab This unit is being sold on behalf of an operational universit (more)y laboratory. The system is in good cosmetic condition and full working order, it received a Maintenance check by PacBio on:13/04/2023. The full Maintenance report is available on request. The unit can be collected from the client in New York, but we may be able to discuss logistics around domestic US delivery at the point of sale. Also included are digital copies of the following: - Installation Summary - 3/3/2020 - Preventative Maintenance Summary - 10/5/2021 The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

KNF LAB Laboport SH810 Chemically-resistant Vacuum System Lab This item was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system features the following:- The system includes a 250ml separator flask on the input side.- A Shott Duran 250ml round bottom flask is included on the condenser side.- The 5-ported condenser coil is 31cm in total length and has a diameter of 6cm.

HOWE Refrigerated Solvent Trap   This was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in working order. It is in reasonable cosmetic condition with minor marks from use.

- Diameter of support rod: 12 mm. - Dimensions (W x D): 300 x 430 mm. - Height: 600 mm. - Max. load: (more) 10 kg.

BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nu (more)cleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample CLIA Moderately complex and easy to use All-in-One computer contains instrument software that is responsible for instrument control, self-calibration, data analysis and storage User interface can be navigated with point-and-click icons (keyboard and mouse), or the Computer’s touchscreen Modules included: Temperature control/heating subsystem to control thermal cycling A liquid handling head to transfer samples from Sample Buffer tubes to Unitized Reagent Strips Onboard readers to measure the amplification reaction and report results Software/user interface allows for: 24 unique thermal cycling channels per system (two onboard readers) Entering patient/sample information, either manually or by external barcode reader Monitoring operations, communication and storing of data Qualitative, quantitative and melt sample analysis Error warnings Download of results to a USB thumb drive LIS connectivity Dimensions (HxWxD): 940 x 755 x 725 mm Weight: 113 kg

Dimensions (WxHxD): 600 x 460 x 580 mm

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x400 mm (A x B).

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-5 interfaces: 2 x RS232, USB, 4 IN, 4 OUT (digital), PROFINET. It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.

Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 The Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 0226 (more)39277 are for use with the Eppendorf A-4-38 Swing Bucket Rotor for the Eppendorf 5702/R Centrifuges. These adapters feature a capacity for 4 x 1.5/2.0ml round bottom tubes each with the maximum tube dimensions (Diameter x Height) of 11mm x 43mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 4 x 1.5/2.0ml Adapters, Cat. # 022639277 SpecificationsBottom ShapeRoundRotor CompatibilityEppendorf A-4-38 Swing Bucket Rotor