Lab Oven Smart SLN 115 POL-EKO

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. The inner door hasn't been tested as it requires compressed air but we see no reason why it would not work with the correct air setup. There are no gloves included. It is in good cosmetic condition with minor marks. Internal dimensions- D57.5 W105 H47cmShelf - 104 x 25cmRight chamber - D29 W33 H30cm

Thermo Scientific ORS Track 3200mm Long Track Lab This item was removed from a university where it w (more)as surplus to requirement. It was removed from a Thermo Scientific Spinnaker, which was used to house the robotic arm to run along a workstation. It is in good cosmetic condition, but we are unable to test it as it requires connection to a Thermo Scientific Spinnaker System to operate. The track is 3200 mm long, as stated in the title.

Purite Select Purification System L300150 with Storage Tank This was removed from a university lab w (more)here it was surplus to requirements. The system powers up and pressurises but was not tested further. It is in reasonable cosmetic condition with marks from use. Both filters, Pretreat 8 and Puripac PP8 expired 15/02/23 100L Storage Tank

COMBISTORAGE 3 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 stainless steel shelves - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

Selecta Agimatic-S magnetic stirrer. Analogue, without heating, 145 mm Ø upper plate, 10 L stirring  (more)capacity and adjustable speed from 60 to 1600 r.p.m. with electronic regulation. Analog Magnetic Stirrer J.P. SELECTA Agimatic-S. - Without heating (s/c). - Original design, functional construction, with epoxy-coated light alloy injected cabinet, with a 145 mm Ø upper plate, adaptable safety ring and intermediate body that acts as an overflow and thermal separator, in stainless steel. AISI 304. - Easy replacement upper plate. - Front control panel protected against splashes and facing the user. - Electronic speed regulation from 60 to 1600 r.p.m. at constant torque, which is maintained regardless of the viscosity of the fluid. - Electronic circuits free of parasites, modular and easily replaceable

Ohaus ST5000-F pH MeterThe ST5000-Fis a high performance bench meter for universal applications, pro (more)vidingaccurate pH and ORP measurement for high level experiments and research. TheST5000-F is featured with 1,000 measurement memory, eight predefined groups,and three endpoint modes. It has a user friendly interface, with a large LCDtouchscreen display. The meter can be set to record continuous measurement atdesignated intervals of time, and graphs can be simultaneously generated. Up toa nine point calibration ensures extreme precision with a large calibrationcurve that covers a wider pH measurement range. The positioning of thestandalone electrode holder can be moved around the base to fit specificworkstations, and height is also adjustable to optimal viewing. INCLUDED: The Ohaus ST5000-F pH Meter includes: - Stand-Alone Electrode Holder - In Use Cover - pH Buffer Powder Set (4.01, 7.00, 10.00) - 4GB USB Flash Drive - ST350 3-in-1 Glass Refillable pH Electrode - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex D3024 Micro-Centrifuge The Scilogex D3024 Micro-Centrifuge is a compact and powerful high-s (more)peed centrifuge used in physical and chemistry analysis, biochemistry, cellular and molecular biology, clinical Labs and blood donation centers, and is ideal for high-end research applications such as: sedimentation of cells and viruses, separation of sub-cellular organelles, and isolation of macromolecules such as DNA, RNA, proteins or lipids. Supplied with a 24 place 1.5/2.0ml bio-safe aluminum rotor. INCLUDED: The Scilogex D3024 Micro-Centrifuge includes: - 24 Place 1.5/2.0ml Bio-Safe Aluminum Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

F1 Mass Standard - knob weights with adjustment chamber - set (1 g - 5 kg), wooden box Number of pie (more)ces in the set: 16 Weights 1 g i 2 g – solid masses without adjusting chamber

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

RADWAG-manufactured susceptometer enables carrying out measurements of magnetic susceptibility and m (more)agnetization of weights of E1 and lower classes in accordance with OIML R111. Modular design, upon disassembling respective module, enables using the susceptometer as a mass comparator or a balance. Compared to the previous model, the new one features option of internal adjustment and higher readability: [d] =1 μg for loads ranging from 2 g to 50 kg.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW