GRANT GD100

FIRLABO BCR240 refrigerated oven/incubator with forced convection refrigerated incubator FROILABO /  (more)FIRLABO Model: BCR 240 Capacity: 223 / 240 liters Temperature range: 0°C to 65°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 153 cm 4 perforated stainless steel shelves, non-tilting On self-locking casters 230 V / 50/60 Hz 1500W Weight: 114 kg Year of manufacture: 2005 Tested at 0°C and 37°C

Temperature range: +7°C to 85°C Speed: 3 – 4 rpm (± 1) Max No. of Tubes: 3 large 80 mm tubes (2 incl (more)uded) Dimensions (DxWxH): 555 x 325 x 375 mm Internal Dimensions (DxWxH): 320 x 270 x 250 mm

This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to (more) requirements. The unit powers up and was tested with a digital thermometer. It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C. The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.

Sanyo Biomedical Freezer Model MDF-U537 with Full Drawer Storage Lab This item was removed from a un (more)iversity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). Includes the following: 6 x Shelves: 64 x 50 cm8 x Drawers: 29 x 55 x 100 cm 6 x Drawers: 29 x 55 x 140 cm

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Under-bench cabinet depth 51cm - Length 96cm Laboratory cabinet Length: 96cm Depth: 51cm Height: 71c (more)m In melamine 2 doors On casters (hidden by the finishing profile) In good condition Slightly oxidized hinges and some small traces of wear (see photos)

VACUUBRAND PC 3001 VARIO Select Chemistry Pumping Unit Ultimate Vacuum 2.0 mbar (1.5 Torr) Maximum  (more)Pumping Speed 1.18 CFM at 60Hz Number of Heads/Stages 4/3 Features - Simplify lab work with the VACUU·SELECT vacuum controller with graphic user interface and predefined applications - Automatic boiling point detection and continuous optimization of vacuum levels for quick process times - Compact and powerful; superior performance even with continuous condensate purge - Whisper quiet and ultra low vibration - Eco-friendly: extremely low power consumption and efficient solvent recovery. Oil-free! The PC 3001 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. This pump is suitable for even high boiling point solvents. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run fully automated distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, the VACUU·SELECT controller detects solvent boiling and automatically adjusts the pump's motor speed to maintain process control. The VARIO motor speed control also makes the pump whisper quiet and provides for exceptionally long maintenance intervals. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection.INCLUDED: The VACUUBRAND PC 3001 VARIO Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Electronic balance Sartorius SIWRDCP-1-3-I. Capacity max. weighing 3 kg, Readability of 0.1 g. Remot (more)e Control. Manual of instructions. Specifications:

MA X2.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Scilogex SK-R1807-S Digital See-Saw RockerThe Scilogex SK-R1807-S Digital See-Saw Rocker is suitable (more) for mixing applications including, gel staining and destaining, washes, hybridisations, immune precipitation and Western blots. The SK-R1807-S features smooth see-saw rocking motion with 7° rocking angle, LED displays for speed and timer, continuous or timed operation, maximum shaking weight 6.6lbs, and a 10-80RPM rocking speed range. Comes with an anti-slip platform for culture flasks and straps to secure tubes. INCLUDED: The Scilogex SK-R1807-S Digital See-Saw Rocker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty