58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

ABS 4.6 Cu. Ft. Built-In Vaccine Refrigerator NSF/ANSI 456 Certified PH-ABT-NSF-UCBI-0404

UsedAmerican BioTech SupplyRefrigeratorsUnited States

From€2,905.54excl. VAT

In stock

Can't find what you're looking for?

DESCRIPTION
SINGLE SOLID DOOR PHARMACY/VACCINE UNDERCOUNTER REFRIGERATOR BUILT-IN
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
4.6 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
All 25 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 25

Brands
American BioTech Supply
New/Used
Used
DESCRIPTION
SINGLE SOLID DOOR PHARMACY/VACCINE UNDERCOUNTER REFRIGERATOR BUILT-IN
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
4.6 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING
LOW PROFILE ROLLER WHEELS AND LEVELING LEGS
INTERIOR LIGHTING
SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM
AIRFLOW MANAGEMENT
FORCED AIR TECHNOLOGY, PATENT PENDING
EXTERNAL PROBE ACCESS
REAR WALL PORT (1/2") DIA.
INSULATION
CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM
EXTERIOR MATERIALS
WHITE POWDER COATED STEEL
ACCESS CONTROL
PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE
GENERAL WARRANTY
TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION
COMPRESSOR WARRANTY
FIVE (5) YEARS COMPRESSOR WARRANTY
EXTERIOR WIDTH
23 7/8"
EXTERIOR DEPTH
24 3/8"
EXTERIOR HEIGHT
33 3/8"
PRODUCT WEIGHT
100 LBS.
SHIPPING WEIGHT
140 LBS.
RATED AMPERAGE
1.74 AMPS
POWER PLUG/POWER CORD
NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL
FACILITY ELECTRICAL REQUIREMENT
110-120V AC: 15 A (MINIMUM)
AGENCY LISTING AND CERTIFICATION
CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY.

Product description

4.6 cu. ft. built-in vaccine refrigerator with microprocessor controls, NSF/ANSI 456 certified, LED lighting, and HFC-free refrigerant.

Overview:

This built-in undercounter vaccine refrigerator from American Biotech Supply is designed to comply with NSF/ANSI 456 standards for safe vaccine storage, maintaining temperatures from 2°C to 8°C (36°F to 46°F). It uses HFC-free refrigerant (R600a isobutane) for energy efficiency and environmental health.

Key Features:

  • Capacity: 4.6 cubic feet gross volume
  • Door: Single solid door, self-closing, right-hinged, magnetic gasket, keyed lock
  • Shelves: Three total (two adjustable, one fixed) with guard rail on the back
  • Interior Lighting: Full-coverage, shielded, switched LED with balanced spectrum
  • Airflow: Forced air technology with patent pending airflow management
  • Temperature Control: Microprocessor controller with LED display (0.1°C resolution), calibrated stainless steel probe, external rear wall probe access port (1/2" diameter)
  • Temperature Alarms: Visual and audible high/low temperature alarms with remote alarm contacts
  • Insulation: EPA compliant high-density urethane foam, foamed-in-place
  • Compressor: Hermetic, high performance with 5-year warranty
  • Refrigerant: EPA SNAP compliant R600a (isobutane)
  • Defrost: Cycle optimized, zero energy
  • Energy Use: 1.15 kWh/day; average heat rejection 1.57 kWh/day (224 BTU/h)
  • Temperature Stability: Cabinet air uniformity ±0.8°C; stability ±1.2°C; max variation ±1.4°C
  • Recovery: Temperature recovery under 8°C within 4.8 minutes after door opening
  • Dimensions (Exterior): 23 7/8" W x 24 3/8" D x 33 3/8" H
  • Weight: 100 lbs product, 140 lbs shipping weight
  • Power: 110-120V AC, 1.74 amps, NEMA 5-15 plug, UL471 compliant
  • Certifications: NSF/ANSI 456, UL, c-UL, ETL, c-ETL, hydrocarbon refrigerant safety certified
  • Compatibility: Access control compatible with Pyxis®, Omnicell®, Acudose RX®
  • Included Accessories: Temperature Monitor Device compliant with CDC guidelines, calibration certified for 3 years, buffered probe, max/min memory, field-installable F/C switch, audible/visual alarms, pharmacy refrigerator/freezer toolkit, temperature logs

Operational Environment:

  • Indoor use only
  • Ambient temperature range: +18°C to +26°C (65°F to 78°F)
  • Relative humidity less than 70% RH

Performance Notes:

  • Noise level ≤ 43 dBA installed
  • Pull down time to nominal operating temperature: 35 minutes
  • Testing conducted at 22°C ambient using NSF/ANSI 456 compliant validation ballast probes under empty chamber steady state

This refrigerator meets stringent vaccine storage requirements, ensuring regulated temperature control and alert systems necessary for pharmaceutical safety.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 23 October 2026