58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

ABS 4.6 Cu. Ft. Built-In Vaccine Refrigerator Left Hinged NSF/ANSI 456 Certified PH-ABT-NSF-UCBI-0404-LH

From€2,907.56excl. VAT

In stock

Can't find what you're looking for?

DESCRIPTION
SINGLE SOLID DOOR PHARMACY/VACCINE UNDERCOUNTER REFRIGERATOR BUILT-IN
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
4.6 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
All 25 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 25

Brands
American BioTech Supply
New/Used
Used
DESCRIPTION
SINGLE SOLID DOOR PHARMACY/VACCINE UNDERCOUNTER REFRIGERATOR BUILT-IN
OPERATIONAL ENVIRONMENT
INDOOR USE ONLY, +18°C TO +26°C (+65°F TO +78°F), <70% RH
STORAGE CAPACITY
4.6 CU. FT. GROSS VOLUME
DOOR
ONE SWING SOLID DOOR, SELF-CLOSING, RIGHT HINGED, NON-REVERSIBLE, MAGNETIC SEALED GASKET, KEYED LOCK
SHELVES
THREE SHELVES (TWO ADJUSTABLE/ONE FIXED) WITH GUARD RAIL ON BACK
MOUNTING
LOW PROFILE ROLLER WHEELS AND LEVELING LEGS
INTERIOR LIGHTING
SHIELDED, SWITCHED LED LIGHTING, FULL COVERAGE, BALANCED SPECTRUM
AIRFLOW MANAGEMENT
FORCED AIR TECHNOLOGY, PATENT PENDING
EXTERNAL PROBE ACCESS
REAR WALL PORT (1/2") DIA.
INSULATION
CABINET IS FOAMED-IN-PLACE WITH EPA COMPLIANT HIGH DENSITY URETHANE FOAM
EXTERIOR MATERIALS
WHITE POWDER COATED STEEL
ACCESS CONTROL
PYXIS®, OMNICELL® AND ACUDOSE RX® COMPATIBLE
GENERAL WARRANTY
TWO (2) YEARS PARTS AND LABOR WARRANTY, EXCLUDING DISPLAY PROBE CALIBRATION
COMPRESSOR WARRANTY
FIVE (5) YEARS COMPRESSOR WARRANTY
EXTERIOR WIDTH
23 7/8"
EXTERIOR DEPTH
24 3/8"
EXTERIOR HEIGHT
33 3/8"
PRODUCT WEIGHT
100 LBS.
SHIPPING WEIGHT
140 LBS.
RATED AMPERAGE
1.74 AMPS
POWER PLUG/POWER CORD
NEMA 5-15 PLUG, 8 TO 10 FT TYPICAL, CONFORMS TO UL471 REQUIREMENTS, VACCINE STORAGE POWER CORD WARNING LABEL
FACILITY ELECTRICAL REQUIREMENT
110-120V AC: 15 A (MINIMUM)
AGENCY LISTING AND CERTIFICATION
CERTIFIED IN ACCORDANCE WITH THE NSF/ANSI 456 STANDARD FOR VACCINE STORAGE. UL, C-UL, ETL, C-ETL LISTED (EITHER SINGLE OR DUAL AGENCY LISTINGS) AND CERTIFIED TO UL471 STANDARD, HYDROCARBON REFRIGERANT SAFETY.

Product description

Built-in 4.6 cu. ft. vaccine fridge with microprocessor control, forced air, NSF/ANSI 456 certification, and temperature alarms.

Product Overview:

  • Built-in undercounter refrigerator designed for vaccine storage compliant with NSF/ANSI 456 Standard.
  • Protects pharmaceuticals at 2°C to 8°C (36°F to 46°F) for refrigerators.
  • Uses HFC-free refrigerant (EPA SNAP compliant R600a/isobutane) for environmental and energy efficiency.
  • Microprocessor controller with LED display (0.1°C resolution), visual and audible alarms.
  • Equipped with temperature alarms, remote alarm contacts, LED interior lighting, and external probe access port with probe included.

Technical Specifications:

  • Capacity: 4.6 cubic feet gross volume
  • Door: One solid, right hinged, self-closing door with magnetic gasket and keyed lock (non-reversible)
  • Shelves: Three total (two adjustable, one fixed) with back guard rail
  • Dimensions: Width 23 7/8", Depth 24 3/8", Height 33 3/8"
  • Weight: 100 lbs net, 140 lbs shipping
  • Airflow: Forced air technology (patent pending) for uniform temperature control
  • Insulation: Foam-in-place high density urethane, EPA compliant
  • Exterior: White powder coated steel
  • Lighting: Full coverage shielded, switched LED lighting with balanced spectrum
  • Mounting: Low profile roller wheels with leveling legs
  • Power: 110-120V AC, 1.74 amps, NEMA 5-15 plug, conforms to UL471 requirements
  • Protection & Access Control: Compatible with PYXIS®, OMNICELL®, ACUDOSE RX® security systems
  • Warranty: 2 years parts/labor (excl. probe calibration), 5 years compressor warranty

Performance Data:

  • Temperature uniformity within ±0.8°C across cabinet air
  • Temperature stability within ±1.2°C for any single probe
  • Maximum temperature variation ±1.4°C
  • Temperature rise after 8-second door opening: does not exceed 6.4°C
  • Recovery to <8°C within 4.8 minutes after 3-minute door opening
  • Energy consumption: 1.15 kWh/day; average heat rejection 1.57 kWh/day (224 BTU/h)
  • Noise level ≤43 dBA
  • Pull down time to nominal operating temperature: 35 minutes

Refrigeration System:

  • Hermetic high-performance compressor
  • Hybrid fin and tube condenser with low noise fan
  • Plate wall evaporator
  • Cycle optimized defrost with zero energy usage

Controller & Alarms:

  • Microprocessor with parametric control and LED temp display
  • Temperature setpoint range: 1°C to 10°C (factory default required for compliance)
  • Calibrated stainless steel display probe
  • Remote alarm contact for high/low temp alarms compliant with NSF/ANSI 456
  • Temperature Monitor Device (TMD) included, CDC guideline compliant with 3 year calibration certification, buffered probe for product simulation, min/max memory, F/C switchable

Certifications & Listings:

  • NSF/ANSI 456 certified for vaccine storage
  • UL, C-UL, ETL, C-ETL listed and certified to UL471
  • Complies with Hydrocarbon Refrigerant Safety standards

Additional Information:

  • Designed for indoor use only at ambient temperatures +18°C to +26°C (65°F to 78°F) and <70% RH
  • Multiple shipping and delivery options available, including inside delivery and installation services (end user responsible for power connection and temperature setting)

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026