Yamato GLD202BB Rotary Vane Vacuum Pump with Rubber Hose, 115V

Leybold Vakuum GMBH Trivac 016B Pump This item was removed from a university lab where it was surplu (more)s to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

IKA MVP 10 Basic Vacuum Pump Pump Rate Max. 1.7 m³/h (28.3 l/min) Ultimate Vacuum 7 mbar Protection (more) Class IP 54 Features - Designed for dry, oil-free applications with a diaphragm pump made of PTFE or PTFE compounds for chemical resistance. - Slimline, compact design ensures space-saving installation and long service life. - Simple maintenance and straightforward servicing for ease of use. - Operates quietly at 65 dB(A), suitable for laboratory environments. - Includes a gas ballast valve for handling condensable vapors and preventing pump oil contamination. The IKA MVP 10 Basic Vacuum Pump is an essential tool designed for dry, oil-free applications in laboratory settings. Featuring a robust diaphragm pump constructed from PTFE and PTFE compounds, it ensures exceptional chemical resistance and reliability. Its compact, space-saving design and quiet operation at 65 dB(A) make it ideal for environments where noise levels are a concern. Simple maintenance procedures and a gas ballast valve for managing condensable vapors further enhance its usability, making the MVP 10 a dependable choice for various vacuum applications. INCLUDED: The IKA MVP 10 Basic Vacuum Pump includes: - MVP 10 basic vacuum pump - Vacuum hose - Silencer - Y hose connector 8 mm - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA MVP 10 Basic Vacuum Pump SpecificationsPump rate max. (50/60Hz)1.7 m³/hPump rate max. (50/60Hz)28.3 l/minFinal pressure without gas ballast7 mbarFinal pressure with gas ballast15 mbarSuction levels2Cylinder2Connection diameter suction side10 mmConnection diameter pressure side10 mmGas ballast valve yes Input pressure 7 - 1050 mbarSpeed (50Hz)1380 rpmSpeed (60Hz)1680 rpmNoise at low. pressure65 dB(A)Mode automaticyesMode manualyesMode pump %yesMode programyesDimensions (W x H x D)245 x 155 x 320 mmWeight11.5 kgPermissible ambient temperature10 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54Voltage230 / 115 / 100 VFrequency50/60 HzPower input180 W

VACUUBRAND RC 6 Chemistry-HYBRID Pump Ultimate Vacuum 0.002 mbar (0.0015 Torr) Maximum Pumping Spee (more)d 4.1 CFM at 60Hz Number of Heads/Stages 2/2+2 Features - Reduced internal corrosion, even when working with corrosive vapors - Oil changes typically reduced 90% or more compared with rotary vane pumps alone - Most economical solution: In practical operation a cold trap is often no longer necessary - Ease of maintenance due to telescopic design The RC 6 chemistry-HYBRID pump is a combination of a two-stage rotary vane pump and a two-stage chemistry diaphragm pump for optimized corrosion resistance. The diaphragm pump maintains the oil reservoir under vacuum to keep the partial pressures of solvent vapors at levels below their condensation points and to reduce largely the concentration of oxygen and corrosive gases. Therefore, the RC 6 chemistry-HYBRID pump has a much higher solvent vapor pumping capability and resistance to aggressive gases than conventional rotary vane pumps. INCLUDED: The VACUUBRAND RC 6 Chemistry-HYBRID Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Technical features Flow rate (max.) 20 l / min Final vacuum (max.) 8 mbar (abs.) Pressure (max.) 1 b (more)ar (rel.) Permissible fluid temperature 5-40°C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PTFE Applications Rotary evaporation Degassing Drying of the gel Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Chemically resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable Maintenance free ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Capacity (max.): 5.5 l/min Final vacuum (max.): 160 mbar Operating pressure (max.): 2.4 bar Permissi (more)ble medium temperature: 5 – 40 °C Permissible ambient temperature: 5 – 40 °C Weight: 1.9kg

This listing is for 1 of 2 Mikura Autura 1000 Microplate Washer

This listing is for a. The unit is in full working condition and is ready for immediate release. T (more)he WTW PH 330i is an advanced pH/mV pocket meter designed for precision and ease of use in various applications where pH and mV measurements are essential. Its compact design makes it highly portable, making it suitable for fieldwork as well as laboratory settings. Key Features: Compact Design: The PH 330i is lightweight and portable, making it perfect for use in a variety of environments, including labs and on-site field applications. Automatic and Manual Temperature Compensation: Depending on the electrode utilized, the device can automatically or manually adjust for temperature discrepancies, ensuring accurate pH readings regardless of environmental conditions. Temperature Sensor Recognition: The meter intuitively recognizes connected temperature sensors, seamlessly switching to the appropriate mode for compensation and measurement, enhancing user convenience. Waterproof Housing: Designed with a waterproof casing, the PH 330i is robust and suitable for both wet environments and demanding field conditions. Easy Calibration with Buffer Recognition: Calibration is user-friendly, allowing for quick adjustments and accurate readings through buffer solution recognition. Calibration Procedures: The PH 330i offers three different calibration procedures to ensure flexibility and accuracy: AutoCal TEC: This fully automatic calibration process allows for two-point or three-point calibrations specifically tailored for WTW technical buffer solutions, ensuring precise adjustments. AutoCal DIN: Similar to AutoCal TEC, this fully automatic calibration process also provides two-point or three-point calibration, but it offers a different display format, catering to user preferences. Manual Calibration: For users who prefer more control, the manual calibration option allows the input of specific calibration values according to user-defined parameters. Measurement Modes: The PH 330i is capable of measuring the following: pH Value: Provides direct and accurate pH measurements essential for various applications. ORP Voltage (Oxidation-Reduction Potential): Measures the voltage related to the oxidation or reduction reactions in the sample, providing additional insights into sample chemistry.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes - ø8, ø10 and ø12 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW