Hoefer VP200 Diaphragm Vacuum Pump for GD2000 Vacuum Gel Dryer

The peristaltic pump of the Cole Parmer type Masterflex is ideal for pumping corrosive, abrasive and (more) viscous liquids without damaging the pump. The Cole Parmer Masterflex can also be used in the pharmaceutical and biopharmaceutical industry. Speed: 6 – 3000 rpm Excluding pump head

Leybold Trivac Vacuum Pump Type-D65BCS fitted w/ Exhaust filter with lubricant return ARS 40-65 Lab  (more)This item was removed from a university where it was surplus to requirement. It is in reasonably good cosmetic condition and powers on, but it frequently stalled during testing. We believe this could be sorted with a service. Therefore, it is listed as Spares/Repair. A 4 Pin 3 Phase plug was fitted for the purpose of testing, it was removed prior to being stocked. it is not included. This item is fitted with the following:- Leybold Exhaust filter with lubricant return ARS 40-65

Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump The Scilogex STORM5000 and STORM5000C di (more)aphragm vacuum pumpsare durable and chemical resistant. All contact surfaces are PTFE coated.STORM5000.STORM5000C vacuum pumps come with a liquid inlet trap and vacuumregulator making it a perfect choice for vacuum filtration, desiccation, andother mid-range vacuum applications. They are also bleach resistant, allowingthem to be used with cell culture decontamination protocols. INCLUDED: The Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 1.100 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Sucti (more)on Height (max.) 3 mWg Pressure (max.) 4 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual and remote control - Self-priming, can run dry - Splash-proof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz - Output signal fault alarm - Cable for external control included Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual and analog controls. INCLUDED: The KNF LIQUIPORT IP65 NF 1.100 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Cable for external control - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nXDS15i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS15i Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15i Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iEdwards nXDS10iEdwards nXDS15iEdwards nXDS20iNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.8 / 4.012.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Edwards mXDS3s Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5  (more)m^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3s Dry Scroll Pump includes: - Inlet Isolation Valve - Exhaust Silencer - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Thermo Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. The shaking plate and Rotisserie shaker are both in good working order. It is in good cosmetic condition with minor marks.

Baker Hypoxycool Culture Media Hypoxia Conditioner This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside. It was tested temperature tested (thermometer not included), but no other functions would run without gas being connected. We are unable to do that at our facility. Internal dimensions 38 x 38 x 30cm (LxWxH)

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Scilogex SCI40-S Overhead LED Digital Stirrer Bundle, 110-220V Stirring Capacity 40L Viscosity Maxim (more)um 50,000mPas Speed Range 50 to 2,200 RPM Features - A wide range of speed from 50 to 2200rpm - Brushless DC motor for long life and maintenance free - Analog speed controls displayed on the LED display for monitoring actual speed - High torque for viscous medium stirring - Over torque protection automatically stops the motor - Safety circuits allow for safe stop function in anti-stall or overload condition - A through-shaft design allows for easy adjustment of the impeller position - In the event of power loss, the stirrer will resume stirring at the preset speed when the power returns - Pass through stirrer rods accepted - cTUVus approved for UL and CSA Scilogex overheard stirrers can accomplish the most demanding tasks and provide high safety and increase performance. They are widely used in chemical synthesis, pharmaceutical synthesis, and physical and chemical analysis, as well as petrochemical industries. These products have a high degree of reliability and performance, and are protected by a two year manufacturer’s warranty. INCLUDED: The Scilogex SCI40-S Overhead LED Digital Stirrer Bundle, 110-220V includes: - 18900071 Stainless Steel Cross Stirrer - 18900131 Stand - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 20-Port ManifoldManifoldincludes 20 neoprene valves with molded plastic knobs that accommod (more)ate both1/2" and 3/4" adapters for connection of flasks.Manifolds aremade of type 304 stainless steel and mount atop FreeZone Freeze Dryers. INCLUDED: The Labconco 7522300 20-Port Manifold includes: - Neoprene Valves x 20 (accomodates 1/2" & 3/4" adapters) - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

KNF LIQUIPORT IP65 NF 300 FT.18S Diaphragm Liquid Transfer Pump Flow Rate 0.5 to 3L/min Suction Hei (more)ght (max.) 3 mWg Pressure (max.) 1 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual control - Self-priming, can run dry - Splash-proof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz® Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator. INCLUDED: The KNF LIQUIPORT IP65 NF 300 FT.18S Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 12mm - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty