51k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Yamato DX-402C 74L Natural Convection Laboratory Oven (115V)

From€6,050.28excl. VAT

In stock

Can't find what you're looking for?

Circulation Method
Natural convection
Operating Temperature Range
Room temp. =5°C to 300°C
Temperature Control Accuracy
±1°C (at 300°C)
Temperature Distribution Accuracy
±10°C (at 300°C)
Maximum Temperature Reaching Time
60 min (Room temp to 300°C)
All 29 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 29

Brands
Yamato Scientific
New/Used
Used
Circulation Method
Natural convection
Operating Temperature Range
Room temp. =5°C to 300°C
Temperature Control Accuracy
±1°C (at 300°C)
Temperature Distribution Accuracy
±10°C (at 300°C)
Maximum Temperature Reaching Time
60 min (Room temp to 300°C)
Interior Material
Stainless Steel
Exterior Material
Electro-galvanized steel sheet with melamine resin baking finish
Heat Insulating Material
Glass wool
Heater
Iron-chrome wire heater 1.36 kW
Exhaust Port
33 mm I.D. x 2 pcs. (on top)
Temp. Controller
PID control by microprocessor
Temp Setting Method
Digital setting by ▲▼ key
Temp. Display Method
Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer
1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation Function
Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional Function
Calibration off-set, Power failure compensation function, Key lock function
Heater Circuit Control
SSR control
Sensor
K-thermocouple
Safety Device
Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal Dimensions W×D×H
450x410x400mm
External Dimensions W×D×H
550x540x730mm
Internal Capacity
74 Liters
Shelf Plate With Standard Load
15kg/piece
Shelf Rest Step Number / Pitch
9 steps / 35mm
Power Source 50/60Hz
AC115V 14A
Weight
38kg
Accessories
Stainless steel punching metal shelf plate 2pcs. / Shelf bracket 4pcs.

Product description

74L natural convection oven with PID controller, 5-300°C range, ±1°C accuracy, safety features, and digital timer.

Yamato DX-402C Natural Convection Laboratory Oven

  • Capacity: 74 Liters (2.6 cu. ft.)
  • Temperature Range: Room temperature - 5°C to 300°C
  • Temperature Control: Digital PID microprocessor controller
  • Accuracy: ±1°C at 300°C temperature control accuracy; ±10°C temperature distribution accuracy at 300°C
  • Heating Method: Iron-chrome wire heater, 1.36 kW power
  • Circulation: Natural convection (gravity convection)
  • Construction:
  • Interior: Stainless steel
  • Exterior: Electro-galvanized steel with melamine resin baking finish
  • Insulation: Glass wool
  • Temperature Sensors: K-type thermocouple
  • Display:
  • Measured temperature: Green LED digital display
  • Set temperature: Red LED digital display
  • Timer: Adjustable from 1 minute to 999 hours 50 minutes, with two selectable ranges
  • Operation Modes: Fixed temperature, Quick Auto Stop, Auto Stop, Auto Start
  • Additional Functions: Calibration offset, power failure compensation, key lock function
  • Safety Features:
  • Self-diagnosis for temperature sensor and circuit abnormalities
  • Automatic overheat prevention with hydraulic independent device
  • Electric leakage breaker with overcurrent protection
  • Circuit breaker with overcurrent protection
  • Key lock function
  • Physical Dimensions:
  • Internal (W×D×H): 450 × 410 × 400 mm
  • External (W×D×H): 550 × 540 × 730 mm
  • Weight: 38 kg
  • Accessories Included: Two stainless steel punched metal shelves, four shelf brackets
  • Exhaust Ports: Two 33 mm I.D. ports on top
  • Power Supply: AC 115V, 14A, 50/60 Hz
  • Shelf Load Capacity: 15 kg per shelf
  • Shelf Adjustment: 9 steps at 35 mm pitch

This oven provides economical and precise temperature control suitable for drying and heating laboratory samples with enhanced safety and ease of maintenance.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 16 November 2026