Benchmark IPD9600-3878-1 Ceramic grinding bars 3/8X7/8 , 45 degree , angled medium ceramic homogenizers pack of 100

Benchmark Pulse 150 Ultrasonic Homogenizer with 6mm Horn and Soundproof Box The Pulse 150 Ultrasonic (more) Homogenizer uses cavitation and ultrasonic waves to break cells in suspension, shear DNA and prepare samples for ChIP assays. With up to 150 watts of power, the unit processes samples from 0.1 ml to 150 ml (with the appropriate horn). All components needed for homogenization are included with the Pulse 150 – a controller, transducer, temperature probe, 6 mm diameter titanium alloy horn and wrenches to change horns. A soundproof box with sample platform is also supplied as standard. The box reduces the noise generated by the sonicator. The 6mm horn is appropriate for volumes from 10ml to 100ml. Optional horns are available for other volumes. Operating parameters are set and viewed on the 4.3 inch color touch screen. Pulsed operation is easily programmed as is the power level. Twenty programs can be stored in memory and recalled as needed. Alarms alert the user to over temperature, over/no load and expiration of time. INCLUDED: The Benchmark Pulse 150 Ultrasonic Homogenizer with 6mm Horn and Soundproof Box includes: - Controller - Transducer - 6mm Horn - Soundproof Enclosure - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Constant Cell Disruption Systems Model T2 40 AA AA Homogeniser French Press Lab This system was remo (more)ved from a university where it was surplus to requirement. The previous client stated this system was in full working order, prior to removal. When powered up, the system successfully passed all self-checks. All elements are in good cosmetic condition. Model Code T2 40 AA AASerial No. 525Firmware v6.10Boot v4.15 Additional parts Included: 1 x user manual4 x allen keys2 x jet removal tools1 x pair of Richmond needle-nosed pliers1 x tube of Dow Corning high vacuum grease, half-used1 x step cranked 14mm spanner1 x 127mm steel flange1 x large internal 6cm valve2 x 60ml syringes1 x 5ml syringe1 x plastic T-fork2 x O-rings Part No. KE9041 x O-rings Part No. KE16083 x O-rings Part No. BOF000761 x O-rings Part No. BOF001761 x O-rings Part No. BOF003147 x O-rings Part No. BOF000732 x target anvils Part No. KE23995 x seal assembly Part No. DRG027012 x hard cases for spares and tools

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BENCHMARK D1000-E Homogenizer, Includes 5mm and 7mm Generators Brand new in original packaging Part  (more)number: D1000 E With 5mm and 7mm generators (ideal for microtubes) For volumes from 100µl to 250ml Speed ​​range: 8500 to 30000rpm Capacity: 0.1 to 250ml Noise level: <70dB Operating temp. Range: +4° to 65°C Dimensions: 1.9 x 2.3 x 9 in / 4.5 x 5.8 x 22.5 cm Weight: 1.35 lb / 0.62 kg Electrical: 230V 50Hz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA T25 Digital ULTRA-TURRAX Homogenizer Model: T25D ULTRA TURRAX Homogenizer / Disperser For volume (more) from 1 to 2000 ml (H2O) Speed: 3000 to 25000 rpm Voltage: 230V, 50/60Hz Power: 500W Without dispersion tool (motor only)

Heidolph Hei-VAP Expert Control ML/G3 Non Coated Motor Lift w/ G3 Vertical GlasswareThe Hei-VAP Seri (more)es of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control ML/G3 Non Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - G3 Vertical Glassware - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1060eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1060eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1060eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This item has just arrived in our stock. Please enquire for further details.

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

Large-size additional display is an accessory of load-cell scales. stainless steel housing 6 digits  (more)of 4,5 inches in height (11,2cm) white diode backlight Features Robust and Resistant Stainless Steel Housing The WWG-2 LCD display is housed in a stainless steel housing, which enables its operation in harsh industry conditions. The display can be installed on the table top or mounted on the wall. The WWG-2 LCD features white diode backlight and clear display indicating digits of 4.5&quot; (11.2cm) height. Communication Communication with indicators (weighing instruments) is carried out via RS22 or RS485 connectors. Depending on the installation option, the display is powered by 230VAC or 7-24VAC.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW