51k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Yamato BOA-311 Large Capacity Constant Temperature Laboratory Oil Bath

From€10,241.23excl. VAT

In stock

Can't find what you're looking for?

Temp. Control Range*
RT+10~200°C
Temp. Control Accuracy*
±0.1°C (at 200°C Silicone Oil)
Temp. Fluctuation*
0.2°C (at 200°C Silicone Oil)
Temp. Distribution Accuracy*
±0.2°C (at 200°C Silicone Oil)
Temp. Gradient*
0.5°C (at 200°C Silicone Oil)
All 24 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 24

Brands
Yamato Scientific
New/Used
Used
Temp. Control Range*
RT+10~200°C
Temp. Control Accuracy*
±0.1°C (at 200°C Silicone Oil)
Temp. Fluctuation*
0.2°C (at 200°C Silicone Oil)
Temp. Distribution Accuracy*
±0.2°C (at 200°C Silicone Oil)
Temp. Gradient*
0.5°C (at 200°C Silicone Oil)
Temp. Rise Time*
~120 min.
Temp. Control System
PID control by microcomputer
Temp. Setting System
Digital setting with menu keys and the ▼▲ keys
Temp. Display System
Temp. reading display: Green 4-digit LED digitalTemp. setting display: Red 4-digit LED digital
Sensor
Platinum sensor Pt100Ω (for temperature control)Type-K thermocouple (for overheat prevention)
Operation Mode
Fixed operation (with operation indicator lamp)
Stirring Method
Jet agitation
Heat Insulator
Ceramic fiber
Heater Type / Capacity
SUS316 Pipe Heater 2kW
Safety Device
Self-diagnostic functions (automatic overheat prevention, temperature sensor failure, heater disconnection, SSR short circuit, main relay failure, memory error, internal communication error, abnormal temperature reading, abnormal water level), overcurrent leakage breaker, overheating protector, independent overheating preventor, emergency stop button
Other Functions
Drain valve / operation indicator lamp / external alarm output terminal / temperature output terminal (with 1-5V, 4-20mA changeover switch) / external communication function (RS485) / calibration offset function / set value lock function / power failure recovery mode selection function
Inner Bath Dimensions
W312 x D440 x H320 mm
Effective Inner Bath Dimensions
W296 x D340 x H270 mm
Bath Capacity
~37L (when the amount of oil is up to 50mm from the upper edge of the bath)
External Dimensions WxDxH
531 x 520 x 578 mm (oil bath depth 397 mm)
Power Source
AC115V 18.5AAC220V 10A
Weight
~37kg

Product description

37L oil bath with PID temperature control up to 270°C, jet stirring, and multiple safety features.

  • Large capacity oil bath with a 37L volume and effective inner dimensions of W296 x D340 x H270 mm
  • Temperature control range from room temperature +10°C to 270°C using a PID microcomputer control system
  • High temperature distribution accuracy via jet stirring, maintaining ±0.2°C at 200°C (silicone oil)
  • Temperature sensor: Platinum Pt100Ω for control and Type-K thermocouple for overheating prevention
  • Heating element: SUS316 Pipe Heater, 4.5 kW
  • Temperature display system: dual 4-digit LED displays—green for current temperature, red for setpoint
  • Safety features include:
  • Triple overheating prevention (automatic heater shut-off at set temp +6°C, overheating devices)
  • Emergency stop switch cutting off overcurrent circuit
  • Float switch to prevent empty boil and oil overflow
  • Glass-protected operation panel against liquid dripping
  • Self-diagnostic functions covering sensor failure, heater faults, communication errors, etc.
  • Overcurrent leakage breaker and independent overheating preventer
  • Additional functions:
  • External alarm output and temperature output terminals (selectable 4-20 mA or 1-5 V)
  • RS485 communication port
  • Calibration offset and set-value lock functions
  • Power failure compensation and recovery modes
  • Physical dimensions: 531 x 520 x 578 mm (WxDxH) with oil bath depth of 397 mm
  • Weight: approximately 37 kg
  • Power source: AC 220V, 21A (with external transformer)
  • Operation mode fixed with operation indicator lamp; digital temperature setting using menu and arrow keys
  • Heat insulation by ceramic fiber; drain valve included for maintenance

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 17 November 2026