Julabo FT402 Immersion Cooler, 115V/60Hz (NRTL Certified)

ECO Silver Lauda - Cooling Thermostat LAUDA ECO with reliable technology and modern design for tempe (more)rature ranges from -50°C to 200°C depending of the models. Microprocessor management and integrated cooling system. Silver (monochromatic LCD graphic display), both equipped with mini USB interface. They are distinguished by their range of functions, ease of use and clarity of the display, allowing maximum comfort of use for the operator. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Refrigerated thermostats comes standard with tank lid, pump connections and are available with air and water cooling. A drain cock on the back of the device makes changing the liquid in the tank easy and safe.Thermostatic bath/circulator with latest microprocessor technology and integrated cooling system MAIN FEATURE • Monochrome grafic LCD display for simultaneous indication of actual and set value • User friendly menu navigation in plain language • Easy input via cursor and soft keys. Additional Tmax key for overtemperature protection • Fully electronic continuous controller with PID action • Safety class III for operation with flammable and non-flammable liquids. Overtemperature cut-out adjustable via menu • Vario pump with six adjustable performance levels • Easy control of the flow rate between internal and external circulation during operation without contact with the bath • USB interface as standard • Upgradeable with an interface module (analogue module, contact module, RS 232/485 module, Profibus, Ethernet-USB module) • Upgradeable with Pt 100/LiBus module for external control and remote control via Command console • Integrated programmer, 1 programme with max. 20 segments • Pump connectors with plastic nipples 13 mm as standard • Bath vessel made from stainless steel with drain valve • Condenser cooling Air • Utilizes natural refrigerants Graph of cooling performance of ECO Silver LAUDA cryostats. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Pump connection: Outflow and return with fittings 13 mm diameter (plastic) 2 - Bath cover 3 - Front grip recess 4 - Ventilation grill (both sides) 5 - Front panel (removable without tools) 6 - Four feet 1 - Rating label 2 - Control cable of cooling underpart (only with RE 1050 S) 3 - Rear grip recess 4 - Connecting lead between the control head and cooling underpart 5 - Bath draining tap 6 - Bath drain point 7 - Ventilation grill

Julabo FT402 Immersion Cooler, 115V/60Hz (NRTL Certified) Working Temperature Range -40°C to 30°C R (more)efrigerant R449A Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution - Integrated temperature control and display - With external Pt100 sensor (200 x 6 mm dia., stainless steel) JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT402 Immersion Cooler, 115V/60Hz (NRTL Certified) includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applied Biosystems QuantStudio 12K Flex Accufill System This was removed from a university lab where (more) it was surplus to requirements. The powers up but has not been tested further at our facility. The lab confirmed that it was in working order before it was put into storage. It is in excellent cosmetic condition with marks from use. Included with it are;1x Box of Open Array 384 well sample plates (opened)Part no. 440694710Pk The plates are still inside a sealed bag and are in good cosmetic condition. 1x Open Array Acufill User guide:The unit is in good cosmetic condition and appears to be complete.  Cables: 2x USB A to USB B cables:The units are in good cosmetic condition. 1x Blue ethernet cable:REV C 4379889

A&D Weighing Apollo GF-124A Analytical Balance, 122 g, 0.1 mg Capacity 122 g Readability 0.0001 (more) g Repeatability 0.0001 g Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-Alert visually & audible indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Flow rate display streamlines & improves filling or dosing precision - FR-Cal calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare is a comparator which provides feedback if the flow rate is within limits - FR-Secure stores tare values in our non-volatile memory if application was disrupted - External Calibration easy one touch button performs & document external calibration - Universal Flexi Coms (UFC) edit serial data output making label printing possible - Password-Protect offers password-protection up to 11 users and 1 administrator - Large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless & accessible allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO to simplify operation across users - Weighing pan and dust plate can be easily removed for cleaning - Toggle between the Quick USB mode or Virtual COM mode (bi-directional) The A&D Weighing Apollo GF-124A Analytical Balance, 122 g, 0.1 mg, with a capacity of 122 g and a readability of 0.0001 g, delivers high precision in a robust package, ensuring accurate measurements for various laboratory applications. This balance features external calibration with an easy one-touch button that not only performs but also documents calibration, ensuring consistent performance and compliance with lab standards. Its fast stabilization time of approximately 1.5 seconds, or 1.0 seconds enabled by Smart SHS® Weighing Technology, significantly enhances productivity, especially in fast-paced environments. Designed for versatility and user-friendliness, the GF-124A incorporates features like Impact-Alert, which visually and audibly indicates the magnitudes of impact shocks, and a Shock-log that documents the date, time, and level of shocks, protecting the integrity of your results. Additional advanced functionalities include a Flow Rate Display (FRD) that streamlines and improves the precision of filling or dosing tasks. The FR-Cal function calculates and displays outputs for the mass or volume flow rate by entering density, while FR-Compare provides feedback if the flow rate is within set limits. FR-Secure ensures that tare values are stored in non-volatile memory to prevent data loss during disruptions. Operational simplicity is achieved through its user-friendly interface featuring six straightforward keys—ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO—and a large, front-mounted spirit level with LED illumination for easy leveling. The balance's flexible communication capabilities, including RS-232C and USB interfaces, support seamless data management. All these features are housed in a design that allows for easy cleaning and maintenance of the weighing pan and dust plate. The A&D Weighing Apollo GF-124A Analytical Balance is backed by a 5-year warranty, assuring long-term reliability and support. INCLUDED: The A&D Weighing Apollo GF-124A Analytical Balance, 122 g, 0.1 mg includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Dimensions (Total H/H without frame xWxD): 2500/1665 x 1200 x 1000 mm Internal dimensions (HxWxD): 1 (more)100 x 1020 x 700 mm Window opening: 400 mm Window maximum opening: 780 mm Equipped with: 4 wall sockets Water tap Gas tap Air tap Outlet for drain