Accuris MR9620-CFR SmartReader PC Security Software (21 CFR Part 11 Compliant)

This Alphelys MiniCore Tissue Arrayer was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and the laser turns on immediately. It was not tested further. It is in good cosmetic condition with some minor marks from use.

Branson Extension 1/2 in dia. With replaceable tip 101 148 013 Half wave disruptor horn extension, 5 (more)″ long, 1/2″ diameter, used to extend length of Branson 1/2″ diameter disruptor hornINCLUDED: The Branson Extension 1/2 in dia. With replaceable tip 101 148 013 includes: - Manufacturer's Documentation Request a Formal Quote

Hermle Z496-K Tissue Culture Bundle The Z496-K centrifuges offer the highest tube/bottle capacity in (more) our line. Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application. A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for the storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory. For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge. INCLUDED: The Hermle Z496-K Tissue Culture Bundle includes: - Hermle Z496-K High Volume Floor Standing Centrifuge (230V ONLY) - Z496-1000 4 x 1000ml Swing Out Rotor with Rectangular Buckets - 1 Set of Z496-1000-A50 15ml Adapters - 1 Set of Z496-1000-A15 50ml Adapters - Power Cord - Operator's Guide - Manufacturer Documentation - 5 Year Manufacturer's Warranty

RCT basic Synthesis Solution 250 Speed Range 50 to 1,500 rpm Temperature Setting Range 0 - 310 °C Se (more)tting accuracy speed 10 rpm Features - Synthesis blocks can be used for safer synthesis in 250 ml round-bottom flasks, reducing hazards associated with oil baths. - Support rod and elliptical magnetic stirring bars provided for efficient positioning and stirring in round-bottom flasks. - Synthesis attachment made of solid anodized aluminum. - LED displays for set and actual values, with temperature setting resolution of 1 K for precise control. - Designed with aluminum alloy set-up plate and IP 42 protection class, offering long-lasting performance in various environmental conditions. The RCT basic Synthesis Solution 250, designed for safe synthesis in 250 ml round-bottom flasks. This stirrer significantly reduces hazard potential and simplifies handling and cleaning. The solid anodized aluminum synthesis attachment withstands temperatures up to 300°C.INCLUDED: The RCT basic Synthesis Solution 250 includes: - H 16 V Support rod - R 350 Universal clamp - H 44 Boss head clamp (2 pcs.) - IKAFLON 25 ellipse (5 pcs.) - RCT basic - PT 1000.60 Temperature sensor, stainless steel - H 38 Holding rod - Screw driver - H 135.25 Flask carrier 250 ml without handle - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato BOA-201-115V Large Capacity Oil Bath 37L, 115V Temp. Control Range RT+10~200°C Temp. control (more) accuracy ±0.1°C (at 200°C Silicone Oil) Bath capacity ~37L Features - Advanced supportive functions - Standard equipped with external alarm output, temperature output terminal (4~20mA, 1~5V adjustable) RS485 communication function, key lock function, calibration offset function - Triple overheating prevention function (heater shuts off automatically at set temperature + 6°C, overheating prevention device, independent overheating prevention device) - Emergency stop switch. Forces cut off of the overcurrent circuit in case of emergency - Float switch for empty boil prevention and oil overflow prevention - Operation panel is protected by glass from liquid dripping - Large operation lamp lighting during operation for attention - Self diagnostic function, overheat prevention device, over current leakage breaker, key lock function, power failure compensation function Large capacity 37L oil bath with temperature control range of ambient +10~200°C. and high temperature distribution accuracy by adopting jet stirring method. Equipped with 3 overheating preventors (heater cut off automatically when reaching setting temperature + 6°C, overheating preventor, individual overheating preventor). Standard equipped with emergency stop switch. Forces cut off of the overcurrent circuit in case of emergency. Float switch for empty boil prevention. Float switch for oil overflow prevention. Glass control panel protect from liquid dripping. Large operation lamp lighting during operation for attention. Self diagnostic function, overheat prevention device, over current leakage breaker, key lock function, power failure compensation function. Advanced supportive functions: external alarm output, temperature output terminal (4~20mA, 1~5V adjustable) RS485 communication function, key lock function, calibration offset function. INCLUDED: The Yamato BOA-201-115V Large Capacity Oil Bath 37L, 115V includes: - Shelf and Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Bio Rad Gel Doc Universal Hood II This item was removed from a university laboratory where it was su (more)rplus to requirements. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Included Components: - Transilluminator - Camera

Labconco RapidVapVacuum EvaporationAdvanced vacuum function Microprocessor controls vacuum at pr (more)eset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900000 RapidVapVacuum Evaporation, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

RADWAG pipettes are modern measuring equipment designed and manufactured in accordance with strict s (more)tandards concerning manufacturing cleanliness and biodegradability of the product. The pipettes represent a new line of the 'liquid handling' product group, designed to quickly measure and transport liquids of small volume. They are characterized by high dosing accuracy and ergonomic, solid design. The pipette mechanism ensures exceptional accuracy and repeatability with reduced pressure on the pipetting button. All the pipettes are inspected for the conformity with the requirements of PN-EN ISO 8655 standard for dosing accuracy and repeatability. Each pipette is delivered with a test report featuring measurements results. The enclosed user manual contains a description of the pipetting techniques as well as verification and adjustment procedures that can be carried out by the user. Calibration certificates, issued by the accredited calibration laboratory are available on request. Features: Large and readable display that is fully visible during pipetting; Innovative soft grip preventing heat transfer to the pipette inside; Low pressure required to use the pipette reduces the risk of RSI; Simple click mechanism for changing the pipette volume; Option of autoclaving the whole pipette (disassembling not required). Recommended autoclaving process: 15 minutes at 121°C temperature, 1.05 bar pressure; Tip ejector collar is made of PVDF which has a high chemical resistance (also at high temperatures) and low susceptibility to microorganisms expansion; Ultra UV resistance; Convenient button for changing the tips; Compatible with most of the tips available on the market.

Highest Precision The E1 class mass standard of 2 kg is a cylindrical standard with the highest prec (more)ision, ensuring accuracy at the highest level. Made of high-quality materials to guarantee stability and reliable results. Ideal for laboratory, research, and industrial applications where weighing precision is crucial.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).