Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V Operating Temperature Range 100°C to 1150° (more)C Max. Temperature Reaching Time ~90 min. Internal Capacity 7.5L Features - RCF-free chamber - High-temperature accuracy at ±1.0°C - Upgraded with long-life R-thermocouple sensors - High accuracy controller for better operability and visibility - Excellent heat tightness with a firmly sealed chamber door - Program operation of maximum 99 steps, 99 patterns, with repeat operation function - High-quality alumina porcelain hot plate where the heater is not exposed to the inner chamber preventing contamination of samples - Safety features include self-diagnostic functions, calibration off-set, key lock function, auto-recovery after a power failure, earth leakage breaker, automatic overheat prevention device, and independent overheat prevention device High performance 7.5L muffle furnace with a microprocessor-controlled thermo-regulator characterized by excellent repeatability and features temperature resistant paint. High accuracy controller for better operability and visibility. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±1.0°C. Upgraded with long life R-thermocouple sensors. High quality alumina porcelain hot plate where heater is not exposed to the inner chamber preventing contamination of samples. Program operation of maximum 99 steps, 99 patterns, with repeat operation function. Safety features include self-diagnostic functions, calibration off-set, key lock function, auto recovery after power failure, earth leakage breaker, automatic overheat prevention device and independent overheat prevention device. Optional items include exhaust system, N₂ gas loading device (with flow meter), temperature output terminal, time-up output terminal, sample tray, external communication terminal (RS232C), external communication adapter, event output terminal, operation signal output terminal and furnace floor plate. Temperature range 100°C or 1150°C. INCLUDED: The Yamato FP-303 High Performance Muffle Furnace 7.5L, 115V includes: - Exhaust port cap, fuse, furnace floor plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DNF-601 Programmable Energy Saving Forced / Natural Convection Oven 150L, 115V Temperature Ra (more)nge Ambient +15°C to 260°C Temperature Distribution Accuracy Forced Convection: ± 2.5°C (at 260°C) Natural Convection: ± 3°C (at 120°C) Chamber Volume 150L Features - Two types of circulation, forced and natural convection, in one unit (compatible with model 300/400/600) - Eco-oven with improved air velocity control system and adjustable damper - Program featured to reduce power consumption significantly - Superior heat tightness and insulation of chamber - Excellent dust tightness, dust can hardly enter the chamber - Air velocity changeable in 10 stages using digital setting of controller - Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions - Adjustable damper position at chamber front to optimize operation - Fluorescent display, interactive input method, calibration off-set function High-performance, energy-saving, programmable 150L constant temperature oven with two types of circulation (forced and natural convection) in one unit. Program featured to reduce power consumption significantly. Superior heat tightness and insulation of chamber. Excellent dust tightness, dust can hardly enter the chamber. Air velocity changeable in 10 stages using digital setting of controller. Standard with 99 step program operation with repeat operation, auto start, auto stop and quick auto stop functions. Adjustable damper position at chamber front to optimize operation. Fluorescent display, interactive input method, calibration off-set function. Operating temp ambient +15~260°C. INCLUDED: The Yamato DNF-601 Programmable Energy Saving Forced / Natural Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Boekel Scientific 240200 RapidFISH Slide Hybridization Oven, 115V The Boekel Scientific 240200 Rapid (more)FISHSlide Hybridization Oven was designed to simplify Fluorescent In-SituHybridization (FISH) procedures for FFPE (formalin fixed paraffin embeddedtissue) samples, cell suspensions, and other tissue preparation procedures.Temperature control and humidity are essential for FISH probes to bind to RNAand DNA. The RapidFISH has a self-clamping slide tray design that maintains therequired humidity. Microscope slides in the RapidFISH do not require coverslipsto be glued because the removable tray of the slide incubator traps moisture inthe system. Elimination of this step decreases processing time and ensures thatthe specimens stay hydrated during processing. The system has an easy to usecontrol system for controlling temperature, time and controlled temperaturesteps. The device has a small footprint and still maintains excellenttemperature stability and uniformity because of its dual heater convectionsystem. FISH testing is used worldwide to identify biological markers in theform of DNA/RNA. Self-clamping slide tray, ideal for hybridization No coverslip glue necessary Dual heater convection system for excellent temperature control Process up to twenty (20) 3”x 1” glass microscope slides Includes slide tray and metal slide holder Easy to use control system Includes RapidFISH Slide Hybridizer, Slide Tray, Slide Holder ApplicationHighlights Histology, Pathology, FFPE sample storage, Cancer Research, Cancer Diagnosis,Genetic Research, Genetic Diagnosis Click Here to View Product Video INCLUDED: The Boekel Scientific 240200 RapidFISH Slide Hybridization Oven, 115V includes: - RapidFISH Slide Hybridizer, Slide Tray, Slide Holder - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: +7°C to 85°C Speed: 3 – 4 rpm (± 1) Max No. of Tubes: 3 large 80 mm tubes (2 incl (more)uded) Dimensions (DxWxH): 555 x 325 x 375 mm Internal Dimensions (DxWxH): 320 x 270 x 250 mm

This listing is for a Sysmex CA-50 Automated blood coagulation analyzer The CA 50 has 4-detector cha (more)nnel allowing random analysis of up to four different parameters in single or duplicate mode, providing convenience in coagulation screening. Reagent consumption is half of the manual method.

The Ohaus Ranger 7000 is a multi-functional balance that provides reliable, accurate results for a w (more)ide range of weighing applications. It features a large, bright LCD display, user-friendly keypad and a durable stainless steel pan. With its advanced overload protection, fast stabilization time and automatic zero tracking, the Ranger 7000 is an ideal choice for any laboratory or industrial environment. The top of the range! The Ranger 7000 offers the best of all OHAUS industrial product features, even for the toughest operations. Highest resolution, the largest display, almost all possible applications and connectivity as standard, plus the largest storage memory than any compact industrial bench scale from the OHAUS range. - Minimize the need for manual calculations with the numerous advanced, easy and fast applications, thanks to the latest generation software that follows you step by step, minimizing staff training. - Fast performance and legal-for-trade certification ensure exact results. - The robust and modular industrial design allows flexibility and use in harsh environments: die-cast metal housing with IP54 protection and a sealed metal indicator. Application methods Weighing: calculation of the weight of the items in the unit of measurement selected. Percent Weighing: Calculation of the percentage of the weight of a sample with respect to a predetermined reference weight. Piece Counting: Piece counting with uniform weights. Check Weighing / Counting: Compare the weight or count of a sample against the limits set targets. Dynamic Weighing: Weighing of an unstable load. The balance determines the average of several weighings made in a given period of time. Display lock: locks the last stable weigh manually or automatically on the scale display. It is activated by setting the time interval in Dynamic Weighing mode to zero. Fill: With a target weight, a progress bar will appear on the display showing the fill status. Formulation: for the preparation of recipes. Allows the user to store, add and calculate the weights of multiple ingredients; the scale will warn the operator if one or more ingredients have been put in excess. Differential Weighing: Calculate the difference between sample weights and starting weights. Weighing for Density Calculation: Determines the density of the sample. In addition, with the Weigh Below Hook you can test for the specific density of objects that cannot be placed on the weighing pan. Particle size analysis: practice or procedure used to evaluate the size distribution of the particle (also called screening) or of a granular material. Weighing function as shown on the large RANGER 7000 display Modelli disponibili: Applications Weighing, Piece Counting with Auto Optimization, Percent Weighing, Advanced Checkweighing, Dynamic / Animal Weighing, Display Hold, Filling, Formulation, Differential Weighing, Density Determination Display 4.3 '(109 mm) display with WQVGA color graphics resolution and user-controlled brightness Operation AC adapter (included) or rechargeable battery (accessory sold separately) Communication Easy access communication port including standard USB and RS232 (included) and optional third RS232 or Ethernet port (accessories sold separately). Real time clock with GLP / GMP data output. Data transfer function. Structure Modular design, die-cast metal armor, removable stainless steel platform, integrated weigh below hook, menu lock switch, level indicator Construction features Weighing indicators with selectable operation and beep settings, multiple selectable languages, selectable environmental and auto print settings, stability indicator, underload / overload indicators, selectable brightness settings Strengths: - Simplify the most complex applications and minimize the need for manual calculations with 10 advanced application modes - The most accurate scale in its class, with a stabilization time of one second - Extremely durable scale designed for maximum efficiency in harsh industrial environments. It has a metal chassis with IP54 protection and a terminal with metal armor.

Hermle 100ml Insert for Z306-100 Rotor (2pk) These Hermle 100ml Inserts are for use with the 4 x 100 (more)ml Swing Out Rotor for the Z306 Centrifuge. INCLUDED: The Hermle 100ml Insert for Z306-100 Rotor (2pk) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-VAP Expert Control ML/G3B Coated Motor Lift w/ G3 Vertical GlasswareThe Hei-VAP Series  (more)of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control ML/G3B Coated Motor Lift w/ G3 Vertical Glassware includes: - Heating Bath - G3B Vertical Glassware - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Corepoint Scientific CRTPR101WWW-0 20C to 25C Solid Door Upright Controlled Room Temperature (CRT) C (more)abinet Temperature Setpoint Range 20°C to 25°C Capacity 10.5 cu. ft. (297.3L) Defrost Method Cycle Features - Microprocessor temperature controller with digital display for precise temperature management - Interior fan-driven, forced-draft air circulation system for excellent temperature uniformity and recovery - Audible and visual high/low temperature alarms with remote alarm contacts - Two probes (one in air and one in sample bottle) for enhanced monitoring - Six adjustable shelves with guard rails and a bottom footed shelf for air circulation - Right-hinged solid swing door with keyed lock and magnetic gasket for security - Temperature monitoring device (TMD) compliant with CDC guidelines, with 3-year calibration certificate and min/max memory - Environmentally friendly HFC-free refrigerant (R600a) and high-density urethane foam insulation The Corepoint Scientific CRTPR101WWW-0 20°C to 25°C Solid Door Upright Controlled Room Temperature (CRT) Cabinet offers precise temperature control for optimal storage of sensitive products. With a 10.5 cu. ft. capacity, this cabinet features a microprocessor temperature controller and digital display, ensuring accurate temperature management within the adjustable range of 20°C to 25°C. An interior fan-driven, forced-draft air circulation system ensures excellent temperature uniformity and quick recovery after door openings. The cabinet includes audible and visual high/low temperature alarms, remote alarm contacts, and two probes (one in air and one in a sample bottle) for enhanced monitoring. It also features a temperature monitoring device (TMD) compliant with current CDC guidelines, with a 3-year calibration certificate, buffered probe, min/max memory, and visual and audible temp alarms. The unit has six adjustable shelves with guard rails, a bottom footed shelf for air circulation, and a back wall evaporator cover. Security features include a right-hinged solid swing door with a keyed lock and magnetic gasket. Additional features include an LED interior light, probe access port, leveling legs, powder-coated exterior, high-density urethane foam insulation, HFC-free refrigerant (R600a), and a vaccine toolkit with temperature logs. This cabinet ensures reliable and efficient storage, preventing unnecessary expenses and product recalls. INCLUDED: The Corepoint Scientific CRTPR101WWW-0 20C to 25C Solid Door Upright Controlled Room Temperature (CRT) Cabinet includes: - Key for Door Lock - 6 x Adjustable Shelves - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Accessory designed for viscosity measurements of non-flowing substances. In these materials the vis (more)co- sity cannot be measured by standard methods and spindles due to cavitation effect around the spindle. We recommend using the HELDAL unit and T-bar spindles for comparative measurements on non- flowing substances. A Fungilab viscometer is mounted on the Heldal unit, and it restricts measuring head to smoothly run up and down within pre-established limits, allowing cons- tant contact between T-bar spindle and test sample thanks to the helical line described.