Yamato FO-610CR Muffle Furnace with Communication Port 17.5L, 220V

Carbolite CTF 12/100 Tube Furnace This was removed from a university lab where it was surplus to req (more)uirements. Although it's in good cosmetic condition, the item is being sold as Spares or Repairs since it does not turn on.

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V Temperature Range Ambient +5°C to (more) 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V is expertly designed for effective drying and storage of lab instruments. It operates in the temperature range of room temperature plus 5°C to 70°C, utilizing natural convection. Key features include a large observation window for monitoring, adjustable feet for stability on uneven surfaces, and a stainless-steel interior that's both easy to clean and corrosion resistant. The oven is equipped with a stainless-steel pipe heater (1.0kW) and a water receiving plate at the bottom. Temperature control is managed by a PID controller with a microprocessor, allowing precise settings via digital ▲/▼ keys. It includes a K thermocouple temperature sensor and liquid-expansion temperature controller for overheat protection. Safety and usability are enhanced with a silicon rubber-packed single door and a standard 3mm glass observation window measuring 250x300mm. The oven offers a shelf plate load capacity of 15kg and has 10 shelf rest steps with a 30mm pitch. Weighing approximately 45kg, its internal dimensions are 450×450×450 mm, and external dimensions are 504×562×788 mm. The DG-400C is an excellent choice for laboratories needing a reliable and efficient solution for drying glassware and other instruments. INCLUDED: The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IF75 incubator/drying oven with forced convection 80 °C New equipment in original packaging  (more)Model: IF 75 Capacity: 75 litres With cable passage on the left wall Temperature range: +5 °C (above ambient temperature) to +80 °C Inner glass door Integrated digital temperature display 2 perforated stainless steel shelves Power supply: 230V Frequency: 50-60Hz Power: 1250W Internal dimensions: 40 x 56 x 33 cm (W X H X D) Overall dimensions: 58.5 x 94.4 x 51.4 cm (W X H X D) Weight: 66 kg

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2011 Tested at 37°C and -2°C

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Display Independent LED displays allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included)

FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab This was removed from a u (more)niversity lab where it was surplus to requirements. The system is in good cosmetic condition and is made up of the following units; 1x FluidX X-Seal AAS Automated Adhesive SealerS/N: 1407 This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended. Bambi VT75 CompressorS/N: VT75-01229 52x42x61 cm28.08 Kg This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi. 1x SMC compressor regulator (with connecting tubes)P/N: AW10-M5 2x Compressor connecting tubes 4x Rubber grommets 1x Roll of Clear Adhesive SealP/N: 43-1031 2x Spare Rollers 1x Connection Valve 1x RS232 cable

Newport RS4000 H-Configuration Optical Table Assembly This item is being sold on behalf of a client. (more) It is surplus to requirements. This large optical table system consists of an assembly of 3 Newport RS4000 Metric tables configured in the form of an "H."It consists of 2 x 6 Meter Tables & 1 x Bridge Section 2 Meter Table - full dimensions listed below. Table Dimensions:- Long Tables (2): - Length: 6 metres - Width: 1.5 metres - Thickness: 30 cm - Bridge Section: - Length: 2 metres - Width: 1.5 metres - Total Assembled Dimensions (As shown in diagram): - Length: 6 meters - Width: 4.5 meters Please note that this sale is for the Optic Tables only, the supporting legs are not included. Collection available from Surrey, United Kingdom, but we may be able to arrange shipping for an additional cost. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Made of transparent plastic, secures a display against scratches, dust etc. Intended for X2 balances (more). Set - 10 pcs.

PREVI COLOR GRAM is an automated Gram stainer system that provides accurate, standardized results fo (more)r all types of specimens. ◾ Standardized staining – innovative spray nozzles always ◾ dispense the same reagent volume ◾ No cross contamination – each slide separated & fresh staining reagent used each time ◾ Improved microorganism differentiation compared to manual and bath staining results ◾ Full traceability of reagents, users and maintenance – troubleshoot problems & ensure compliance ◾User management to ensure standardization of the process Slide carousel capacity: 12 slides Throughput: 12 – 120 slides/hour Dimensions (HxWxD): 255 x 585 x 560 mm Weight: 15.5 kg