Yamato DNF-601 Programmable Energy Saving Forced / Natural Convection Oven 150L, 115V

Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115VWhether you areworking with (more) Northern Blots, Southern Blots, Microarrays or another applicationthat requires incubation, you will find the Big SHOT III™ Hybridization Oven isa perfect fit for the job. Thisunit is designed to provide rapid heat-up, excellent temperature stability andefficient mixing for all types of hybridization and incubation applications. PID temperature controller for rapid heat up and excellent temperature stability Forced air convention Settable over temperature safety thermostat Programmable digital timer - up to 99 hours, 59 minutes Supplied with a standard carousel Carousel speed up to 60 RPM in 1 RPM increments Reversible door Stackable Easy to remove stainless steel drip pan 2 year warranty INCLUDED: The Boekel Scientific 230402 Big SHOT III, 10-bottle Hybridization oven, 115V includes: - Standard Carousel - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF55plus Forced Circulation Oven 53L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 53 L (1.87 cu. ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF55plus Forced Circulation Oven 53L, 115V is designed to cater to diverse laboratory needs with its advanced temperature control capabilities and substantial internal capacity. It operates within a setting temperature range of +20 to +300°C and boasts a working temperature range that begins just 10°C above ambient, ensuring optimal conditions for a variety of thermal processes. Enhanced with TwinDISPLAY, this model features an adaptive multifunctional digital PID-microprocessor controller complemented by two high-definition TFT-color displays for precise monitoring and adjustments. Safety and efficiency are paramount in the design of the UF55plus. It includes a comprehensive set of safety features such as an overtemperature monitor TWW, an adjustable temperature limiter TWB, and a mechanical temperature limiter TB to prevent overheating. The oven's AutoSAFETY system offers an integrated over- and undertemperature monitor "ASF," which closely follows set parameters and provides timely alarms to safeguard against temperature deviations. Coupled with a robust stainless steel interior that facilitates easy cleaning and uniform heat distribution, the UF55plus is an exemplary choice for professionals seeking a reliable and highly functional heating solution in their laboratories. INCLUDED: TheMemmert UF55plus Forced Circulation Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The 874 Oven Sample Processor is used for automatic thermal sample preparation in Karl Fischer titra (more)tion. The oven method is particularly suitable for samples that do not release their water until higher temperatures have been reached, for sparingly soluble samples, or those that react with the KF reagent.

BINDER CB210 Co2 Incubator / Drying Oven Nominal temperature: 187 ° C Internal volume: 210 l (CB 210 (more)) Temperature range: 7 to 60 ° C CO2 range: 0 to 20% CO2 volume Adjustment accuracy: 0.1% CO2 volume CO2 measurement: IR Nominal voltage: 230 V, single-phase unit Nominal current: 6.6 Amp Power frequency: 50/60 Hz External dimensions (W x H x D): 740 x 1069 x 715 mm Number of doors: 1 Number of internal glass doors: 1 Internal dimensions (W x H x D): 560 x 750 x 500 mm Number of perforated shelves made of stainless steel 1.4301 / V2A: 3 Shelf size (external) (W x D): 556 x 444 mm Empty weight: 121 kg Tested at 37°C CO2 at 5% (6.2% measured) Year of manufacture: 2003 Please note, slight modification to the door for padlock closure. See photos

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

We provide you with three models of platforms in plastic casing: with readability [d] of 0.5 g, 1 g  (more)and 2 g and a maximum capacity [Max] of 0.6/ 1.5 kg, 1.5/3 kg and 3/6 kg. Each model has a weighing pan dimensions of 195 x 195 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE CY10, PUE C32, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. Power of steel The use of stainless steel for the weighing pan guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashing. The housing is made of ABS plastic.

Additional WD-4/6 LCD display has been designed to connect with automatic scales. The display is equ (more)ipped with a stainless steel housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2022 Tested at 37 ° C and -2 ° C