Deep freezer ZLN-UT 200 POL-EKO

Thermo Scientific Revco Elite Plus Freezer Ultra Low-Temperature ULT 2586 This was removed from a un (more)iversity lab where it was surplus to requirements. The unit does not power on, therefore, it cannot be tested, and it's sold as spares or repairs. It is in good cosmetic condition both internally and externally.

New Brunswick Scientific Innova U725-G Ultra Low-Temperature Freezer Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and powers on; however, upon activation, the pump experiences a short circuit, which prevents further testing. Therefore, this item is listed as Spares/Repair. It features 2 x Shelves: 55 x 84cm

Angelantoni Platinum 500 SV Ultra Low Temperature Freezer Lab This item was removed from a universit (more)y where it was surplus to requirement. The unit powers up and is in good working order to -45˚C It is in reasonably good cosmetic condition externally and in good cosmetic condition internally. This item features a key lock with the required key included.

Arctiko Integraline ULUF P90MV -86C Ultra Low Benchtop Freezer Temperature Setting -25°C / -86°C Vol (more)ume 88L Cooling Technology Single System / Static Inverter / MV Features - Outstanding cooling performance with the true and unique single cooling system and natural refrigerant with ultra low GWP (Global Warming Potential) - Compact space-saving design makes the undercounter ULT’s the perfect storage solution for laboratories with limited space. - Single Compressor Technology with a simple structure ensures easy maintenance, lower heat dissipation, low energy consumption and noise reduction for a pleasant work environment. - Direct cooling for optimised temperature stability and uniformity, even with multiple door openings. - Heated door frame prevents ice from building up around the gasket securing a stable and uniform temperature inside the freezer. - Low energy consumption made possible with ECO mode and ultra-efficient vacuum insulated panels. - Built-in CO2 backup controller system for extra security for your valuable samples. - Self-diagnostic function to guarantee that your alarm system is always working correctly. - Equipped with four leveling feet and optional castors for flexible positioning and stability. - The unit includes a vacuum release port for easy access and a key lock for added security. Equipped with ARCTIKO's true single compressor technology, this freezer series offers superior temperature uniformity and outstanding cooling performance This ultra-low temperature freezer stands out with its universal voltage capability, ensuring adaptability across global power supplies and making it ideal for diverse laboratory settings. Features a built-in CO2 backup system, self-diagnostic function for reliable alarm operations, and low energy consumption with an ECO mode. This compact freezer is designed for convenience, offering easy access to samples and flexible placement options in your workplace. Whether placed under a counter or on a benchtop, it’s ideal for labs or clinical environments with limited room. ARCTIKO’s innovative single compressor technology ensures excellent temperature uniformity and outstanding cooling performance, allowing you to focus on your research without worrying about your samples. The primary cable of this device isinterchangeable, allowing it to be usedglobally. Switch between Schuko, NEMA,and UK plugs with ease. Additionally, there’sno need for a transformer; this product iscompatible with any voltage from 110V to240V. The ULUF P90MV automatically adjusts its operationbased on the voltage input. INCLUDED: The Arctiko Integraline ULUF P90MV -86C Ultra Low Benchtop Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Temperature range: -20 to -86 °C Dimensions (WxDxH): 2010 x 770 x 1070 mm Internal dimensions (WxDxH (more)): 1280 x 500 x 762 mm Capacity: 487 l Weight: 291 kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA Fisher Brand Color Squid Magnetic Stirrer model: Color Squid Technical characteristics: 100 – 24 (more)0 V, 4 W. Continuously adjustable speed: 0 to 1500 rpm. Tray dimensions (ø): 11 cm External dimensions (D)x(H)x(W): 130 x 135 x 50 mm Stirring capacity: 0.8 liters (H2O) Weight: 1kg

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-27385 2 x Boxes of Long GlasswareITEM-27382 Black Container of mixed glasswareITEM-27383 Box of Mixed Small GlasswareITEM-26089 Incubator TraysITEM-40020 Unnamed Microplate Reader parts Spares/RepairsITEM-26088 Incubator TraysITEM-26087 Incubator TraysITEM-26086 Incubator TraysITEM-26090 Freezer rackingITEM-28308 Electrothermal Heating MantleITEM-28321 High pressure arc lampITEM-28311 Grant WaterbathITEM-28316 Biodine Fractional Horsepower GearmotorITEM-28312 Unknown plastic componentsITEM-28314 Mixed lab accessoriesITEM-28315 IKA-Werke Type: VX2ITEM-28313 Mass spectrophotometer tubesITEM-28320 Corning Incubator/OvenITEM-28317 Edwards Thermocouple 507ITEM-28309 Oertling GC121/00ITEM-28318 Medexxa HTC100ITEM-28303 Millipore Masterflex PumpITEM-28304 UVP Mineral LightITEM-28310 Unknown Metal ComponentsITEM-28305 FisherBrand PF-1502ITEM-28299 Bio-Rad Sub-Cell Model 192ITEM-30030 Brunel MicroscopeITEM-30036 Leybold Didactic MicroscopeITEM-30033 Motic MicroscopeITEM-27884 Vickers Instruments MicroscopeITEM-26017 IBM ThinkPad Docking StationITEM-05099 opticon bar code readerITEM-26082 Random PartsITEM-26079 Box of cables and pump partsITEM-25523 Grant Water BathITEM-13323 Smart Wireless U-RX UHF Radio Mic ReceiveR AV EquipemntITEM-27885 Vickers Instruments MicroscopeITEM-27886 Vickers Instruments MicroscopeITEM-27887 Vickers Instruments MicroscopeITEM-27888 Vickers Instruments MicroscopeITEM-27889 Vickers Instruments MicroscopeITEM-27904 Vickers Instruments MicroscopeITEM-27891 Vickers Instruments MicroscopeITEM-27905 Vickers Instruments MicroscopeITEM-27892 Vickers Instruments MicroscopeITEM-27893 Vickers Instruments MicroscopeITEM-27898 Vickers Instruments MicroscopeITEM-27895 Vickers Instruments MicroscopeITEM-26025 Kramer Tools VP-211 Automatic VGA/Audio SwitcherITEM-04659 Panasonic Telephone

This Watson Marlow 205S Peristaltic Pump was removed from a university lab where it was surplus to r (more)equirements. The unit powers on and is in good cosmetic condition with minor marks from use. All buttons are responsive to the unit.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.