Julabo PURA 30 Water Bath, 115V/60Hz

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Selecta DIGIT-COOL circulation ultrathermostat. Digital. Adjustable temperature from ambient to 100  (more)ºC. Stability ±0.01 °C. Pt100 sensor. Circulation pump 150 mbar. Adjustable flow rate up to 12 l/min. Safety thermostat and fluid level buoy. Selectable maximum and minimum alarm and working temperatures. (HWD): 450*210*510mm; 22 kg. Consumption: 1.4600 W. User manual. The DIGIT-COOL Selecta Circulation Ultrathermostat is high quality equipment designed to precisely control temperature in laboratory applications and industrial processes. With its easy-to-read digital display and intuitive controls, this thermostat ensures precise and stable temperature control, making it ideal for a wide range of applications. This ultrathermostat features efficient internal circulation that ensures uniform heat distribution, resulting in a homogeneous temperature throughout the system. Additionally, its compact and robust design makes it easy to install and operate, making it an excellent choice for laboratories and industrial plants. With a wide range of temperature settings and exceptional accuracy, the DIGIT-COOL Selecta Circulation Ultra Thermostat is a reliable and versatile tool for any work environment requiring precise temperature control. Its advanced technology and exceptional performance make it an ideal choice for applications requiring precise temperature control. The DIGIT-COOL immersion thermostat allows you to regulate the temperature of the liquid from 0ºC to 100ºC with a stability of 0.1ºC. The thermostats are equipped with: - Pt100 resistance thermometer temperature sensor. - Circulation pump with adjustable flow for agitation. - Cooling coil to regulate room temperature by connecting to mains water. - Safety thermostat and fluid level buoy. - Selectable upper and lower alarm temperature. - Selectable maximum and minimum working temperature. - Selectable reading correction. - RS232 connection. - Reading in degrees Fahrenheit or Celsius. Accessory not included with the possibility of supply: stainless steel bucket, lid with canopy or with reducing discs, frame and racks.

Benchmark MyBath 8L Digital Water Bath The myBath series is designed to guarantee superior accuracy  (more)and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. The 8L model includes easy to use controls allow the user to digitaly select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL feature allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination. The 8L unit has drains for hassle-free water changes and includes a see-through cover that can be removed, or flipped back on a rear hinge to conserve bench space. The lid’s gabled design will divert condensation to the front and back of the bath, away from samples. Racks are available to accommodate 1.5/2.0ml, 15ml and 50 ml tubes. INCLUDED: The Benchmark MyBath 8L Digital Water Bath includes: - Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Applied Biosystems 7300 Real Time PCR System was removed from a university lab where it was sur (more)plus to requirements. The system is comprised of; 1 x Applied Biosystems 7300 Real-Time PCR Unit. 1 x Dell Optiplex 380 with Monitor, keyboard, mouse, USB cable & monitor cable.Running Applied Biosystems Sequence Detection Software (SDS)Version 1.2.3.The Dell has a Fresh install of Windows XP. The 7300 has had a function test run: USB - PassCCD - Pass (version 2.19)Filter Wheel - Pass (FW version G2.10)Shutter - Pass (FW version G2.10)Lamp - Pass (FW version G2.10)Thermal Cycler - Pass (G2.10 Firmware is up to date) The lamp status is Good.It has 1444 Usage hours.It was last replaced 08/01/2008. The unit will require the ROI calibration.

VACUUBRAND AK Inlet Separator/Catchpot for VACUU-PURE Screw Pumps For Use With VACUU-PURE Screw Pum (more)ps Catchpot Volume 500 ml Ambient Operating Temperature 10°C to 40°C Features - For VACUU·PURE Screw Pumps - Direct mounting at the inlet, compact and leak-tight - High conductance - Direct visibility of condensate through the coated round bottom flask - Easy draining of condensate The VACUUBRAND AK Inlet Separator/Catchpot is an essential accessory designed specifically for VACUU·PURE Screw Pumps. It facilitates direct mounting at the pump's inlet, ensuring a compact and leak-tight integration with a leakage rate of 10-4 mbar l/s. This separator features high conductance and includes a 500 ml round bottom flask made of glass, which offers excellent chemical resistance and clear visibility of the condensate. The separator is equipped with a KF DN 25 connection and a DN 15 mm hose nozzle for straightforward setup. Its design allows for easy drainage of condensate, making it both functional and user-friendly, ideal for protecting the vacuum pump from particles and liquid droplets. INCLUDED: The VACUUBRAND AK Inlet Separator/Catchpot for VACUU-PURE Screw Pumps includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Four-sensor powder-coated platforms are a type of industrial scales that have four load cells (strai (more)n gauges) located in each corner of the platform, ensuring accurate measurements regardless of where the load is located on the platform. Application Four-sensor powder-coated platforms are ideal for industrial applications where precise and reliable measurements of heavy loads are needed. They can be used in warehouses, logistics centres, manufacturing plants, as well as in the food, chemical and pharmaceutical industries. Powder coating provides them with extra protection against harsh working conditions, which increases their service life and reliability. Use the potential Our platforms can work with one of as many as eight weighing terminals: PUE CY10, PUE H315, PUE C315, PUE C32, PUE 7.1, PUE HX7, PUE HY10, PUE 5.

SCILOGEX SCI506 LCD Digital Clinical Centrifuge, with 6 x 1.5-15ml rotorThe SCILOGEX SCI506 low-spee (more)d centrifuge is supplied with a fixed angle rotor which can hold up to 6 x 15mL/10mL/7mL/5mL tubes adapters included). It is widely used for PRP, PRF, blood or urine separation in medical routine practice in hospitals, clinics or research institutes.Product Features - Speed range 300-5000rpm - Rotor speed can be set and displayed in RPM or G-force - Two memory programs - Two deceleration speeds can be set to suit different applications - Easy-to-read display - Automatic lid-lock release - Maintenance-free brushless DC motor Click Here to View Product Video INCLUDED: The SCILOGEX SCI506 LCD Digital Clinical Centrifuge, with 6 x 1.5-15ml rotor includes: - Power Cord - Two Year Manufacturer's Warranty

Temperature range: -5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluctuation  (more)(at 40°C): ± 0.1 K Temperature uniformity (at 5°C): ± 0.6 K Temperature uniformity (at 25°C): ± 0.2 K Temperature uniformity (at 40°C): ± 0.3 K Warming up time (to 40°C): 5 min Cooling down time (fromt 40°C to 5°C): 58 min Recovery time after door was opened for 30 sec (at 5°C): 4 min Recovery time after door was opened for 30 sec (at 40°C): 1 min Maximum load: 40 kg Maximum load per shelf: 15 kg Capacity: 53 L Dimensions (WxHxD): 635 x 835 x 580 mm Interior dimensions (WxHxD): 400 x 400 x 330 mm Weight: 72 kg