Selecta Unitronic

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Surgipath 04501GFS-240 Premier Dispensing Console was removed from a university lab where it wa (more)s surplus to requirements. The item powers on and is in a reasonably used cosmetic condition. All compartments successfully heat independently as displayed on the screen, unable to test further at our facility.

This Thermo Scientific Histostar Tissue Embedding Centre was removed from a university lab where it  (more)was surplus to requirements. The unit powers on and has been tested. It is in working order. The screen is slightly faulty but is still readable. There are lines through the display. The wax melting tank and lights have been tested and are working. It is in reasonably good cosmetic condition but has some marks from use. There are some trays of accessories included.

Leica EG1140H Paraffin Embedding Center & EG1140C Cold Plate This was removed from a university  (more)lab where it was surplus to requirements. We tested both units with a digital thermometer (not included). 1 x Model - EG1140 HCat no. 038831690Top tray - 30 x 15.5 x 8cmSide trays - 26 x 16.5 x 4cm The unit powers on and heats up on side plates and top, the thermometer was showing temperature readings of up to 50°c when on a setting of 55°c. The light does not work. 1 x Model - EG1140 C-1Cat no. 038831679The unit powers on with the plate cooling. The temperature cooled to as low as -4°c after running for around 20 minutes. Both units are in a reasonable, used cosmetic condition with marks and stains.

Selecta Unitronic precision bath. Temperature range from ambient +5 ° C to 99.9 ° C. Stability ± 0.0 (more)5 ° C. Capacity of 27 L. Tank dimensions 20x42x 30 cm (HxWxD).Circulation pump with adjustable flow up to 12 L / min. Temperature control by microprocessor and digital LCD reading. Drain tap. Safety device due to overtemperature. User manual. Precision bath with electronic regulation Selecta Unitronic. <p>

AMI Velp illuminated magnetic stirrer AMI is an illuminated magnetic stirrer particularly useful for (more) titrations where optimal light conditions are required for good visualization of the final color change point. AMI 4 has four independent positions, designed to last over time and guaranteed for 3 years. EASY TO USE - Adjustable lighting - Ergonomic design with a very low height - The AMI4 model offers independent speed regulation for each position - Speed ​​regulation up to 1100 rpm - Universal mains voltage range - Light RESISTANT AND DURABLE - The control panel is protected from any liquid spills - Heavy duty steel casing with epoxy coating - Designed for maximum durability and backed by a 3 year warranty - Illuminated surface for viewing particles and color changes - Ideal for microtitration, especially for slight color variations - Soft start and quick achievement of the set speed - Excellent speed control (electronic), even at low speed

Temperature range: 25 – 99.9°C Temperature resolution: 0.1°C Temperature stability: ± 0.2°C Timer: 0 (more):01 min – 9:59 h Bath opening (WxL): 500 x 300 mm Bath depth: 180 mm Capacity: 8 – 22 L Dimensions (WxDxH): 560 x 350 x 320 mm Weigth: 20 kg

Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Sizes (W (more) x H) 18 x 16 cm Maximum Power Settings 500 V, 60 mA, 20 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 16 cm - Rugged injection molded construction is durable and assembles easily - Run two gels with the addition of a divider plate - Built-in casting stand seals leak free - Choose from a wide variety of accessories - Plates, clamps, spacers, and combs are interchangeable with the SE600 Series The Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit is a durable and economical system ideal for educational labs with multiple users. Constructed with rugged injection-molded materials, this compact unit is designed for longevity and ease of assembly, making it well-suited for consistent use in busy lab environments. The SE400 accommodates glass plates up to 18 x 16 cm, providing ample space for efficient protein analysis. With the addition of a divider plate, users can run two gels simultaneously, enhancing throughput and versatility. Equipped with a built-in leak-free casting stand, the SE400 streamlines the setup process, while its components—plates, clamps, spacers, and combs—are fully interchangeable with the SE600 Series, allowing labs to expand their setup with ease. Operating smoothly within standard lab conditions, it handles temperatures up to 45°C and humidity levels up to 80%, with power settings reaching 500 V, 60 mA, and 20 W, ensuring reliable performance for routine applications. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 16 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Spacer-Mate-Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Comb, 15-well, 1.5 mm thick - Spacers, 1.5 mm thick, 2 cm wide, 2 pcs INCLUDED: The Hoefer SE400 Air-Cooled Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Lower Buffer Chamber/Casting Stand on Leveling Base with High Voltage Leads - Upper Buffer Chamber - Safety Lid with Electrodes - Glass Plates, 18 x 16 cm, 2 pcs - Clamp Assemblies, 16 cm, 2 pcs - Cams, 2 pcs - Slotted Gasket for Upper Buffer Chamber - Bubble Level - Laminated Gasket for Casting Stand - Wonder Wedge Plate Separation Tool - Gel Seal - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience AD15R-30-A11B 15L Refrigerated Circulator, Advanced Digital (-30 to 200C), 120V, 60Hz3D  (more)Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD15R-30-A11B 15L Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A &amp; B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD15R-30-A11B 15L Refrigerated Circulator, -30°C to 200°C, 915W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic BA210E LED Binocular Compound Microscope Magnification Range 4x to 100x Optical System Colour  (more)Corrected Infinity (CCIS) Illumination 3W LED Features - Optional intermediate Epi-LED S fluorescence module - Quadruple nosepiece - EC Plan achromatic objectives - Compact rackless stage - Upgradable with phase &amp; pol contrast and simple darkfield - Fixed-Koehler illumination, HAL/LED interchangeability - Coaxial coarse and fine focusing system with tension adjustment - Manufactured in accordance with European RoHS Standard to avoid contact with lead - Anti-fungus treatment applied to all parts of the microscope for humidity protection - Switching power supply for use worldwide (100-240V) Motic’s BA210E is dedicated to give an answer on basic demands from educational and biomedical laboratory work. The upgraded EC Plan Achromatic objectives in our CCIS© Infinity Concept deliver a fully corrected intermediate image for crisp and clear results within a 20mm Field of View. The rackless stage enables a safe x/y scanning even for the unexperienced user. The complete series of EC Plan Achromatic objectives, from 4X to 100X magnification, is achieving an improved image contrast both for human eye and digital cameras through the photo port. Especially in Phase contrast, the optional objectives (positive &amp; negative Phase) show a remarkable performance for a wide range of applications. The N-WF eyepieces start with the standard 10X/20 mm Field of View and provide a diopter adjustment (+/-5dpt) for both eyes, ready for the use of optional reticles. Motic's BA210E is designed for a demanding daily usage. The rackless stage allows a safe evaluation of samples without prominent gear rack. The standard eyepiece tubes feature a 30° viewing angle for maximum comfort, whereas the interpupillary distance of 55-75mm can easily be adjusted, following individual conditions. The trinocular tube option with a 100:0 / 20:80 light split allows the adaption of digital camera systems and the presentation of microscopic images to a larger public. The BA210E is an integral part of Motic’s BA microscope concept. An upgrade with Phase contrast (positive &amp; negative), Darkfield, Polarization and even LED Fluorescence can easily be performed. The BA210E exceeds the limits of a basic upright microscope, allowing to use contrast methods for specific application fields even in teaching environments with limited resources. INCLUDED: The Motic BA210E LED Binocular Compound Microscope includes: - Binocular head Siedentopf type 30° inclined, 360 ° rotating - Widefield high eyepoint eyepiece N-WF10X/20mm with diopter adjustment - Reversed quadruple revolving nosepiece - CCIS EC Plan Achromat Objectives EC PL 4x, 10x, 40x S, 100x S-oil - Built in low position coaxial rackless stage (Right-hand control) - Focusable Abbe condenser N.A. 1.25 with iris diaphragm and slot - 3WLED module - 45mm blue filter, immersion oil (5mL), allen hexagonal key, thumb screw, vinyl dust cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty