Hettich centrifuge carriers 1427 4x

This Thermo Scientific FiberLite F12-6x500 LEX Fixed Angle Centrifuge Rotor was removed from a unive (more)rsity lab where it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use, though it has not been tested and will need to be inspected by a qualified engineer before it is used again. Specs;12,000rpm24,471 x gHolds: 6 X 500ml tube

4 adapters 12x1.5 / 2ml for SIGMA 13104 / 13117 buckets For SIGMA laboratory centrifuge with rotor 1 (more)1133 Reference: 17008 For 4 x 12 tubes of 1.5/2ml

Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor, No Buckets The Hermle Z327-200-AC 4 x 200 ml Swing Ou (more)t Rotor is for use with Hermle Z327 and Z327-K centrifuges. This rotor has a maximum speed of 5,000 RPM, and a maximum capacity of 4 x 200 ml. Its wide variety of adapters make it an adaptable option for a wide variety of applications and research needs. INCLUDED: The Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor, No Buckets includes: - Hermle Z327-200-AC 4 x 200 ml Swing Out Rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 The Eppendorf Plat (more)e Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are designed for use with the Eppendorf S-4-104 Swing Bucket Rotor. These plate buckets feature an aerosol-tight capable cap design (aerosol-tight caps not included), ensuring that samples remain safe and secure during centrifugation. With a maximum capacity of 4 microplates per bucket, 2 cell culture plates per bucket, or 1 deepwell plate per bucket, these plate buckets are ideal for a wide range of applications, including cell culture, protein purification, and nucleic acid isolation. The plate buckets' maximum speed of 3,900 RPM and maximum RCF of 2,568 x g make them capable of high-speed separations, while their 15.1 cm maximum radius ensures efficient sample processing. Overall, the Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 are a valuable accessory for researchers and scientists who require efficient, safe, and reliable plate buckets for use within the Eppendorf 5810/R Centrifuges. INCLUDED: The Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 includes: - Set of 2 Buckets - Full 6 Month Parts and Labor Warranty Eppendorf Plate Buckets (Aerosol-Tight Capable) for S-4-104 Rotor Cat #5820744006 SpecificationsMaximum Speed3,900 RPMMaximum RCF2,568 x gMaximum Capacity4 x Microplates Per Bucket2 x Cell Culture Plates Per Bucket1 x Deepwell Plate Per BucketMaximum Radius15.1 cmRotor CompatibilityEppendorf S-4-104 Swing Bucket Rotor

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software MoticNet offers the t (more)eacher a live overview for each student Digital Microscope Station. This overview can be extended to cover up to 32 individual microscopes with wifi cameras/tablets, so that even larger classes can be managed by a single teacher with ease. Knowing instantly what is going on at each station, the teacher can focus on presenting the actual teaching material. Additionally, the work at one student's station can also be shared with the entire classroom. This product provides licensing for 32 students, and includes two factory configured routers for use of MoticNet. INCLUDED: The Motic 32 Student License w/ 2 Routers and Network Switch for MoticNet Software includes: - 32 MoticNet Student Licenses - 2 Factory Configured Routers - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Eppendorf FA-24x2 Fixed Angle Rotor The Eppendorf FA-24x2 Fixed Angle Rotor, is a centrifuge rotor d (more)esigned for use with the Eppendorf 5425/R Series centrifuges. This rotor has a maximum speed of 15,060 RPM and a maximum relative centrifugal force (RCF) of 21,300 x g. It can accommodate a maximum capacity of up to 24 × 1.5/2.0 mL tubes, making it suitable for a range of applications in biological, biochemical, and clinical research. Overall, the Eppendorf FA-24x2 Fixed Angle Rotor is a reliable and versatile centrifugation accessory that is ideal for high-throughput sample processing in laboratories. INCLUDED: The Eppendorf FA-24x2 Fixed Angle Rotor includes: - Eppendorf FA-24x2 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-24x2 Fixed Angle Rotor SpecificationsMaximum Speed15,060 RPMMaximum RCF21,300 x gMaximum Capacity24 × 1.5/2.0 mL tubesRadius8.4 cmCentrifuge CompatibilityEppendorf 5425/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Gas mixer for 3 gases (CO2, N2, H2) with 100 L buffer vessel.