Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  Plexiglass windows door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard! - Inner chamber in aluminum for better heat transport.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This system measures the growth of micro-organisms. This system features a unique incubator incorpor (more)ating a liquid circulation heat exchanger which provides constant temperatures to all wells, a linear shaker to assure good mixing in each well, a sensitive reader that measures turbidity, a technique more sensitive than a spectrophotometer. Additionally, the system is equipped with 8 filters to measure specific wavelengths, two covered honeycomb plates may be run at one time that makes it possible to run 200 samples simultaneously. Linear range: 0.0 – 2.0 A (max deviation <2%) Noise: max 0.002 A at 0.0 A Drift: max 0.003 A Resolution: 0.001 A Warm-up time: 30 min Light source: Quartz-Halogen lamp 8V/50W Filters: 405, 420, 450, 492, 540, 580, 600 nm and wide band filter 420 – 580 nm Half band with: 3 – 10 nm Detector: Silicon photocell Microplate type: Honeycomb 2 microplate, 100 wells per plate Capacity: 1 – 2 microplates Maximum volume: 400 µL/well Incubating temperature: 1.0 – 60.0°C, selectable with steps of 0.1°C. (Depends on the ambient temperatue. Bioscreen can go 6°C below or 30°C above ambient temperature up to a max of 60°C) Temperature uniformity: ± 0.1°C Heating time from 20°C to 30°C: 30 min Heat transfer fluid required: Mixture of ethylene glycol and water 1:1 Dimensions (WxDxH): 620 x 380 x 230 mm Weight: 22 kg

This Sanyo CO2 MCO-20AIC Laboratory Incubator was removed from a university lab where it was surplus (more) to requirements. The unit is in good working order but will need to be calibrated upon installation. It is in good cosmetic condition with minor marks from use. Item is supplied with 3 shelves. Internal dimensions are L58cm x W45cm x H66cm.

Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C (at  (more)least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP750eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP750eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP750eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This item has just arrived in our stock. Please enquire for further details.

Motic BA410E 50W Halogen Trinocular Sextuple Compound Microscope (Light Split 80/20) Magnification R (more)ange 4x to 100x Optical System Color Corrected Infinity (CCIS) Illumination Quartz halogen 12V/50W Features - Trinocular head with Siedentopf type, 30° inclined and 360° rotating - Color Corrected Infinity Optical System (CCIS®) for enhanced optical performance - Focusable and centerable Swing-out Abbe condenser N.A. 0.90/0.13 with iris diaphragm for darkfield - Widefield N-WF10X/22mm eyepieces with diopter adjustment and rubber eyecups - Reversed sextuple nosepiece for smooth objective changes - EC-H Plan Achromat objectives: 4X, 10X, 40X S, 100X S-oil - Coaxial coarse and fine focusing system with tension adjustment and 1µm precision - Mechanical stage with low position rackless stage control and ceramic insert - Quartz halogen 12V/50W Koehler illumination with intensity control and external lamp house - Optional phase contrast, fluorescence (HBO), and polarization for advanced observation techniques The Motic BA410E 50W Halogen Trinocular Sextuple Compound Microscope is designed for precision and adaptability in advanced laboratory environments. Its trinocular head, featuring a Siedentopf type with 30° inclination and 360° rotation, ensures ergonomic viewing and flexibility. With the Color Corrected Infinity Optical System (CCIS®), the microscope delivers excellent image clarity and color fidelity. It includes a focusable Swing-out Abbe condenser with N.A. 0.90/0.13 and an iris diaphragm for darkfield, enhancing control over lighting. The widefield N-WF10X/22mm eyepieces, along with diopter adjustment and a reversed sextuple nosepiece, allow for smooth and efficient objective transitions. This model comes equipped with EC-H Plan Achromat objectives, including 4X, 10X, 40X S, and 100X S-oil, covering a range of magnification needs. The coaxial coarse and fine focusing system offers a precision of 1µm, ensuring accurate specimen analysis. The 12V/50W Koehler quartz halogen illumination with intensity control and external lamp house ensures optimal lighting for brightfield observation. Additionally, the Motic BA410E is compatible with advanced techniques like phase contrast, fluorescence, and polarization, making it an ideal choice for laboratories requiring high-performance and versatile imaging capabilities. Note: Fluorescence capable with use of Motic Complete Epi-Fluorescence Attachment for BA410E. Please Inquire.INCLUDED: The Motic BA410E 50W Halogen Trinocular Sextuple Compound Microscope (Light Split 80/20) includes: - Trinocular head Siedentopf type 30° inclined, 360° rotating (light split 20/80) - Reversed Sextuple nosepiece - Coaxial coarse and fine focusing adjustment - Built In Rackless Stage - Achromat Swing Out Condenser - CCIS Plan Achromat objectives EC-H PL4X, EC-H PL10X, EC-H PL40X S, EC-H PL100X S-oil - Widefield high eyepoint eyepiece WFPL 10X / 22mm - 45mm Blue Filter - Hexagonal Allen Key - Vinyl Dust Cover - Koehler Illumination Quartz Halogen 12V/50W - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty