56k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Memmert IF30plus Forced Circulation Incubator 32L, 115V

NewMemmertIncubatorsUnited States

From€2,690.84excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +80°C
Working Temperature Range
Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)
0.1°C
Volume
32 L (1.1 cu.ft.)
Temperature Sensor
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
All 30 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 30

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +80°C
Working Temperature Range
Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)
0.1°C
Volume
32 L (1.1 cu.ft.)
Temperature Sensor
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel
ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters
Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program
Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT
The process time does not start until the set temperature is reached
Language Setting
German/English/Spanish/French
Calibration
Three freely selectable temperature values
Fan
Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture
Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent
Vent connection with restrictor flap
Documentation
Program stored in case of power failure
Temperature Control
Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY
Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System
For fault analysis
Door
Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior
Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves
3
Max. Loading Per Shelf
44 lbs
Max. Loading of Chamber
132 lbs
Interior Dimensions (WxHxD)
15.8” x 12.6” x 9.8” (40.1 x 32 x 25 cm)
Exterior Dimensions (WxHxD)
23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight
Approx. 106 lbs
Electrical Data
115 V, 50/60 Hz, approx. 800 W

Product description

Reliable incubator offering precise control and safety for diverse lab applications.

Memmert IF30plus Forced Circulation Incubator 32L, 115V

Working Temperature Range Min. 10°C above ambient up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.)

Features

  • Setting temperature range from +20°C to +80°C with 0.1°C accuracy
  • Volume of 32 L (1.1 cu.ft.) with easy-to-clean stainless steel interior
  • Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring
  • TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
  • Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture
  • AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB
  • Function SetpointWAIT ensures the process begins only after the set temperature is reached
  • Sterilization program for chamber cleaning at 160°C for 4 hours

The Memmert IF30plus Forced Circulation Incubator 32L, 115V is a reliable solution for precise temperature control in laboratory environments. With a setting temperature range from +20°C to +80°C and an impressive accuracy of 0.1°C, this incubator ensures consistent and uniform heating for sensitive applications. Its 32L (1.1 cu.ft.) capacity, combined with a reinforced stainless steel interior, provides ample space for diverse sample types while maintaining easy-to-clean surfaces. The advanced ControlCOCKPIT twin display system offers an intuitive interface with dual high-definition TFT-color interfaces, enabling seamless control over critical parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures optimal airflow and uniform heating.

Safety is at the core of the Memmert IF30plus design, featuring AutoSAFETY systems with integrated over- and undertemperature monitors to protect samples and equipment. The incubator is equipped with dual Pt100 sensors for mutual temperature monitoring and performance assurance, while the adjustable overtemperature monitor and mechanical temperature limiter (TB) comply with DIN 12880 standards. Additional features include a sterilization program for the chamber, function SetpointWAIT to ensure the process only begins once the target temperature is reached, and built-in audible and visual alarms to enhance operational safety. The durable stainless steel construction ensures long-term reliability, making this incubator ideal for a wide range of lab applications.

INCLUDED: The Memmert IF30plus Forced Circulation Incubator 32L, 115V includes:

  • 1 Stainless Steel Grid
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 29 October 2026