51k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Memmert IN75plus Natural Convection Incubator 74L, 115V

NewMemmertIncubatorsUnited States

From€3,228.39excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
74 L (2.6 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
All 30 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 30

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
74 L (2.6 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
Process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Convection
Natural convection
Fresh Air
Admixture of pre-heated fresh air by electronically adjustable air flap
Vent
Vent connection with restrictor flap
Data Logging
AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System
For fault analysis
Door
Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving
2 stainless steel grids, electropolished
Works Calibration Certificate
Includes works calibration certificate for +37°C
Interior
Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves
6
Max. Loading of Chamber
264 lbs (120 kg)
Max. Loading per Shelf
44 lbs (20 kg)
Housing
Rear zinc-plated steel
Set Up
Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)
15.7 x 22 x 13 inches
Exterior Dimensions (WxHxD)
23 x 37.2 x 20.2 inches (d +2.2” door handle)
Net Weight
Approx. 146 lbs
Electrical Data
115 V, 50/60 Hz, approx. 900 W

Product description

Advanced temperature control and versatility for precise incubation.

Memmert IN75plus Natural Convection Incubator 74L, 115V Setting Temperature Range +20 to +80°C Convection Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features

  • Setting temperature range from +20 to +80 °C, with a working range at least 5°C above ambient
  • Internal volume of 74 L (2.6 cu.ft.) with a maximum chamber load of 264 lbs (120 kg)
  • ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
  • Natural convection system and admixture of pre-heated fresh air by electronically adjustable air flap
  • Includes AtmoCONTROL software for data logging via Ethernet interface, USB stick available as an accessory
  • Temperature control features adjustable overtemperature monitor and mechanical temperature limiter according to DIN 12880
  • Comes with two stainless steel grids, fully insulated stainless steel door, and an inner glass door
  • Stainless steel interior, reinforced with deep drawn ribbing and integrated large-area heating on four sides

The Memmert IN75plus Natural Convection Incubator 74L, 115V offers advanced temperature control and versatility for various laboratory applications. With a setting temperature range from +20 to +80°C and a working temperature range starting 5°C above ambient, it ensures precise incubation conditions. The TwinDISPLAY ControlCOCKPIT allows for easy adjustment of essential parameters like temperature, air flap position, and timer, while two Pt100 sensors ensure accurate temperature monitoring and mutual functionality in case of sensor failure. The natural convection system guarantees uniform temperature distribution, ideal for sensitive samples, and the adjustable pre-heated fresh air admixture helps maintain optimal air quality within the chamber.

This incubator also features a durable stainless steel interior with a capacity of 74 liters, reinforced by deep drawn ribbing and integrated large-area heating for even thermal regulation. The fully insulated stainless steel door with an inner glass door provides safety and visibility. With AtmoCONTROL software, users can conveniently manage data logging and programming through USB or Ethernet. The IN75plus is built for high-performance with a maximum chamber load of 264 lbs and can accommodate up to six shelves, making it a robust, reliable choice for professional laboratory environments.

INCLUDED: TheMemmert IN75plus Natural Convection Incubator 74L, 115V includes:

  • 2 Stainless Steel Grids
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 17 November 2026