58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

Memmert IN750plus Natural Convection Incubator 749L, 115V

NewMemmertIncubatorsUnited States

€10,363.77excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
749 L (26.4 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
All 31 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 31

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
749 L (26.4 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
Process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Adjustable Parameters
Temperature (Celsius or Fahrenheit), air flap position, timer
Convection
Natural convection
Fresh Air
Admixture of pre-heated fresh air by electronically adjustable air flap
Vent
Vent connection with restrictor flap
Data Logging
AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System
For fault analysis
Door
Fully insulated stainless steel doors with 2-point locking (compression door lock), inner glass doors
Shelving
2 stainless steel grids, electropolished
Works Calibration Certificate
Includes works calibration certificate for +37°C
Interior
Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves
14
Max. Loading of Chamber
661 lbs (300 kg)
Max. Loading per Shelf
66 lbs (30 kg)
Housing
Rear zinc-plated steel
Set Up
Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)
40.9 x 47.2 x 23.6 inches
Exterior Dimensions (WxHxD)
48.2 x 67.9 x 30.9 inches
Net Weight
Approx. 474 lbs
Electrical Data
115 V, 50/60 Hz, approx. 1800 W

Product description

High-capacity incubator with advanced temperature control and sterilization for precise lab applications.

Memmert IN750plus Natural Convection Incubator 749L, 115V Setting Temperature Range +20 to +80 °C Convection Type Natural Convection Chamber Volume 749 L (26.4 cu.ft.) Features

  • Set temperature range from +20 to +80°C, with a working range of at least 5°C above ambient
  • Precise temperature control with a resolution of 0.1°C, adjustable in Celsius or Fahrenheit
  • Advanced Control Technology with the ability to adjust parameters including air flap position, program time, and time zones
  • Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber, ensuring a contaminant-free environment
  • AutoSAFETY system with integrated over- and undertemperature protection (ASF) and an audible/visual alarm for reliable safety
  • Durable interior made of stainless steel with deep-drawn ribbing and protected heating elements on all four sides
  • High-capacity chamber load of up to 661 kg with adjustable stainless steel shelving for flexibility in storage
  • Exterior constructed from textured stainless steel, providing superior resistance to corrosion and wear

The Memmert IN750plus Natural Convection Incubator 749L, 115V offers an exceptional combination of precise temperature control and safety features for high-capacity applications. With a spacious 749-liter chamber, this incubator provides a temperature range from +20°C to +80°C, ensuring that your samples remain consistently within the desired conditions. The dual high-definition TFT-color displays of the ControlCOCKPIT adaptive digital PID-microprocessor controller allow for easy monitoring and adjustments. For enhanced precision, the system utilizes two Pt100 Class A sensors in a 4-wire circuit to mutually monitor temperature, ensuring optimal conditions even in demanding situations. The incubator also includes a fixed sterilization program for the working chamber, with 4-hour cycles at 160°C to maintain a sterile environment.

Safety and durability are key features of the Memmert IN750plus. The AutoSAFETY system provides over- and undertemperature protection by automatically adjusting according to setpoint values, with alarms to alert users in case of deviations. The exterior is constructed from durable, textured stainless steel that resists corrosion and wear, while the interior features deep-drawn ribbing and large-area heating on all four sides for consistent heat distribution. The interior's stainless-steel design enhances the incubator’s longevity and hygiene, making it ideal for temperature-sensitive applications in laboratories and industrial settings. Additionally, adjustable shelving allows for flexible sample arrangements and can support a maximum chamber load of up to 661 kg, ensuring versatility for diverse lab requirements.

INCLUDED: TheMemmert IN750plus Natural Convection Incubator 749L, 115V includes:

  • 2 Stainless Steel Grids
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026