51k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Memmert IN30plus Natural Convection Incubator 32L, 115V

NewMemmertIncubatorsUnited States

From€2,530.66excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
32 L (1.1 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
All 31 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 31

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
32 L (1.1 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
Process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Adjustable Parameters
Temperature (Celsius or Fahrenheit), air flap position, timer
Convection
Natural convection
Fresh Air
Admixture of pre-heated fresh air by electronically adjustable air flap
Vent
Vent connection with restrictor flap
Data Logging
AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System
For fault analysis
Door
Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving
1 stainless steel grid, electropolished
Works Calibration Certificate
Includes works calibration certificate for +37°C
Interior
Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves
3
Max. Loading of Chamber
132 lbs (60 kg)
Max. Loading per Shelf
44 lbs (20 kg)
Housing
Rear zinc-plated steel
Set Up
Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)
15.7 x 12.6 x 9.8 inches
Exterior Dimensions (WxHxD)
23 x 27.7 x 17.1 inches (d +2.2” door handle)
Net Weight
Approx. 106 lbs
Electrical Data
115 V, 50/60 Hz, approx. 800 W

Product description

Precision incubator with natural convection, 32L chamber, dual sensors, advanced safety features, and intuitive controls.

Memmert IN30plus Natural Convection Incubator 32L, 115V Setting Temperature Range +20 to +80°C Convection Type Natural Convection Chamber Volume 32 L (1.1 cu.ft.) Features

  • 32 L (1.1 cu.ft.) stainless steel chamber for efficient and durable sample storage
  • Precise temperature control with an adjustable range from +20°C to +80°C, ensuring consistent performance even 5°C above ambient
  • Dual Pt100 sensors in a 4-wire circuit deliver reliable monitoring and safety redundancy
  • Intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller for enhanced user experience
  • Natural convection for uniform temperature distribution, perfect for sensitive applications
  • Electronically adjustable air flap provides optimized pre-heated fresh air admixture for sample protection
  • Maximizes productivity with a chamber load capacity of 132 lbs, supporting heavier samples
  • Built-in AutoSAFETY and autodiagnostic systems ensure worry-free operation and advanced protection

The Memmert IN30plus Natural Convection Incubator 32L, 115V offers precise and reliable temperature control for sensitive sample incubation. With a setting temperature range of +20°C to +80°C and working capability 5°C above ambient, this compact 32 L stainless steel chamber is ideal for a variety of laboratory needs. Equipped with dual Pt100 sensors in a 4-wire circuit, it ensures accurate monitoring and safety through redundancy. The TwinDISPLAY ControlCOCKPIT with an adaptive PID-microprocessor controller provides intuitive user control, while the natural convection system ensures uniform temperature distribution throughout the chamber.

Designed for efficiency and user convenience, the incubator features an electronically adjustable air flap for the precise admixture of pre-heated fresh air. With a maximum chamber load of 132 lbs, it supports high-capacity sample handling. The Memmert IN30plus also includes advanced safety features, such as AutoSAFETY, an overtemperature monitor, and an autodiagnostic system, ensuring continuous and secure operation. This high-performance incubator is a dependable solution for labs seeking consistent results and easy operation.

INCLUDED: TheMemmert IN30plus Natural Convection Incubator 32L, 115V includes:

  • 1 Stainless Steel Grid
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 16 November 2026