52k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Memmert IN260 Natural Convection Incubator 256L, 115V

NewMemmertIncubatorsUnited States

From€4,544.11excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5 above ambient temperature to +80 °C
Volume
256 L (9 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
1 Pt100 sensor DIN class A in 4-wire-circuit
All 28 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 28

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5 above ambient temperature to +80 °C
Volume
256 L (9 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel
ControlCOCKPIT: SingleDISPLAY, adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
Process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Adjustable Parameters
Temperature (Celsius or Fahrenheit), air flap position, timer
Convection
Natural convection
Fresh Air
Admixture of pre-heated fresh air by electronically adjustable air flap
Vent
Vent connection with restrictor flap
Data Logging
AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface (temporary trial version available for download). USB stick with AtmoCONTROL software available as accessory (on demand)
Temperature Control
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Door
Inner glass door; fully insulated stainless steel door with 2-point locking (compression door lock)
Interior
Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves
9
Max. Loading of Chamber
661 lbs
Max. Loading per Shelf
44 lbs
Housing
Rear zinc-plated steel
Set Up
Requires a minimum of 6” clearance from the wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)
25.2 x 31.5 x 19.7 inches
Exterior Dimensions (WxHxD)
32.4 x 46.6 x 26.9 inches (d +2.2” door handle)
Net Weight
Approx. 106 lbs
Electrical Data
115 V (± 10%), 50/60 Hz, approx. 900 W / 7.9 A

Product description

Precise temp control with 256L chamber, multiple languages, and autodiagnostic safety.

Memmert IN260 Natural Convection Incubator 256L, 115V

Temperature Range At least 5°C above ambient to +80°C Convection Type Natural Convection Chamber Volume 256 L

Features

  • Spacious 256 L (9 cu.ft.) chamber for versatile sample accommodation
  • Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient
  • High-resolution display with 0.1°C accuracy for set point and actual values
  • Inner glass door allows convenient sample viewing without disrupting the internal environment
  • Adjustable parameters including temperature, air flap position, program time, and time zones
  • SetpointWAIT function starts process timing only after reaching the set temperature
  • Multi-language support with German, English, Spanish, and French options
  • Autodiagnostic system with adjustable overtemperature monitor for reliable safety

The Memmert IN260 Natural Convection Incubator 256L, 115V is designed to provide precise and efficient temperature control for a variety of laboratory applications. With a spacious 256 L (9 cu.ft.) chamber, this unit accommodates a range of sample sizes, maintained within a temperature range of at least 5°C above ambient up to +80°C. Its high-resolution display with 0.1°C accuracy allows precise control over set points and actual temperature values, while the inner glass door ensures convenient sample viewing without disturbing the chamber environment. Featuring adjustable parameters—such as temperature, air flap position, and program timing—along with the SetpointWAIT function, which initiates timing only once the set temperature is reached, this incubator is designed for exacting standards. The multi-language interface offers support in German, English, Spanish, and French, with an easy-to-clean, reinforced stainless steel interior that promotes consistent heat distribution. For added safety, the unit includes an autodiagnostic system with an adjustable overtemperature monitor.

INCLUDED: The Memmert IN260 Natural Convection Incubator 256L, 115V includes:

  • 2 Stainless Steel Grids
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 8 November 2026