51k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com

Memmert IN160plus Natural Convection Incubator 161L, 115V

NewMemmertIncubatorsUnited States

From€4,512.35excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
161 L (5.7 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
All 31 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 31

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +80 °C
Working Temperature Range
At least 5°C above ambient temperature to +80 °C
Internal Volume
161 L (5.7 cu.ft.)
Setting Resolution (temperature)
0.1 °C
Temperature Sensor
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Control Panel
ControlCOCKPIT: TwinDISPLAY, adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
Process time does not start until the set temperature is reached
Calibration
Three freely selectable temperature values
Adjustable Parameters
Temperature (Celsius or Fahrenheit), air flap position, timer
Convection
Natural convection
Fresh Air
Admixture of pre-heated fresh air by electronically adjustable air flap
Vent
Vent connection with restrictor flap
Data Logging
AtmoCONTROL software for reading out, managing, and organizing the data logger via Ethernet interface. USB stick with AtmoCONTROL software available as accessory
Temperature Control
Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off heating approx. 20°C above nominal temperature
Autodiagnostic System
For fault analysis
Door
Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelving
2 stainless steel grids, electropolished
Works Calibration Certificate
Includes works calibration certificate for +37°C
Interior
Easy-to-clean stainless steel, reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. Number of Shelves
8
Max. Loading of Chamber
462 lbs (210 kg)
Max. Loading per Shelf
44 lbs (20 kg)
Housing
Rear zinc-plated steel
Set Up
Requires a minimum of 6” clearance from wall at rear, 8” from ceiling, and 2” from walls or appliances
Interior Dimensions (WxHxD)
22 x 28.4 x 15.8 inches
Exterior Dimensions (WxHxD)
29.3 x 43.5 x 23 inches (d +2.2” door handle)
Net Weight
Approx. 243 lbs
Electrical Data
115 V, 50/60 Hz, approx. 900 W

Product description

Precision incubator with advanced controls for reliable lab use.

Memmert IN160plus Natural Convection Incubator 161L, 115V Setting Temperature Range +20 to +80°C Convection Type Natural Convection Chamber Volume 161 L (5.7 cu.ft.) Features

  • Set temperature range from min. 5°C above ambient up to +80°C, with a display resolution of 0.1°C for precise control
  • Control technology includes adjustable parameters such as temperature (Celsius or Fahrenheit), air flap position, program time, and daylight savings time
  • HeatBALANCE function adapts the heating distribution between upper and lower circuits from -50% to +50% for optimal performance
  • Fixed sterilization program (4 hours/160°C) for chamber sterilization (not for load sterilization)
  • AutoSAFETY system provides integrated over- and undertemperature protection with visual and audible alarms
  • Stainless steel interior with a volume of 161 L and a max chamber load of 462 lbs, offering robust durability
  • AtmoCONTROL software available for data logging, programming, and management via USB or Ethernet
  • High-quality textured stainless steel casing, scratch-resistant and durable, with dimensions of 29.3" x 43.5" x 23"

The Memmert IN160plus Natural Convection Incubator 161L, 115V is designed for precision temperature control in demanding laboratory applications. With a working temperature range of min. 5°C above ambient up to +80°C, this incubator ensures consistent conditions for your samples. The twin Pt100 sensors in a 4-wire circuit provide accurate temperature monitoring, while the adaptive HeatBALANCE function allows for fine-tuned heat distribution between the upper and lower heating circuits. The sterilization feature, with a fixed 4-hour cycle at 160°C, ensures a sterile environment within the chamber, safeguarding the integrity of your work.

Equipped with the advanced ControlCOCKPIT system, this incubator offers an intuitive interface with dual high-definition TFT displays, allowing users to adjust parameters such as temperature, air flap position, and program times. The durable stainless steel interior, reinforced with deep-drawn ribbing, provides 161 liters of internal volume and can support up to 462 lbs of total load. For seamless data management, the AtmoCONTROL software enables logging and program management via USB or Ethernet. The Memmert IN160plus combines innovation, safety, and durability, making it a top choice for precise incubation needs.

INCLUDED: TheMemmert IN160plus Natural Convection Incubator 161L, 115V includes:

  • 2 Stainless Steel Grids
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 16 November 2026