58k+ listingsShips to NLResponse within one hour+31 73 711 4717info@questpair.com
QuestPair

Memmert IF750plus Forced Circulation Incubator 749L, 115V

NewMemmertIncubatorsUnited States

€11,178.06excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range
+20 to +80°C
Working Temperature Range
Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)
0.1°C
Volume
749 L (26.5 cu.ft.)
Temperature Sensor
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
All 30 specifications
  • Ships to NL
  • Response within 1 hour
  • Warranty available. Buy without worry
  • Support from a scientist

Specifications 30

Brands
Memmert
New/Used
New
Setting Temperature Range
+20 to +80°C
Working Temperature Range
Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature)
0.1°C
Volume
749 L (26.5 cu.ft.)
Temperature Sensor
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over performance
Control Panel
ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with 2 high definition TFT-Color displays
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters
Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Sterilization Program
Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber (not the load)
Function SetpointWAIT
The process time does not start until the set temperature is reached
Language Setting
German/English/Spanish/French
Calibration
Three freely selectable temperature values
Fan
Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture
Adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment
Vent
Vent connection with restrictor flap
Documentation
Program stored in case of power failure
Temperature Control
Adjustable overtemperature monitor TWW, adjustable temperature limiter TWB, mechanical temperature limiter TB (protection class 1 DIN 12880)
AutoSAFETY
Integrated over- and undertemperature monitor "ASF", automatically following setpoint value at a preset tolerance range
Autodiagnostic System
For fault analysis
Door
Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior
Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves
14
Max. Loading Per Shelf
66 lbs
Max. Loading of Chamber
661 lbs
Interior Dimensions (WxHxD)
40.9” x 47.2” x 23.6” (104 x 120 x 60 cm)
Exterior Dimensions (WxHxD)
48.2” x 67.7” x 30.9” (122.4 x 172 x 78.4 cm)
Net Weight
Approx. 474 lbs
Electrical Data
115 V, 50/60 Hz, approx. 1800 W

Product description

High-capacity incubator with precise control, safety features, and sterilization program for lab use.

Memmert IF750plus Forced Circulation Incubator 749L, 115V

Working Temperature Range Min. 10°C above ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.)

Features

  • Setting temperature range from +20°C to +80°C with 0.1°C accuracy
  • Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior
  • Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring
  • TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays
  • Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture
  • AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB
  • Function SetpointWAIT ensures the process begins only after the set temperature is reached
  • Sterilization program for chamber cleaning at 160°C for 4 hours

The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications.

Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments.

INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes:

  • 2 Stainless Steel Grids
  • Tilt Protection Wall Bracket
  • Calibration Certificate
  • Power Cord
  • Operator's Manual
  • Manufacturer's Documentation
  • 3 Year Manufacturer's Warranty

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Yes. Every verified supplier states which service partners cover the instrument, and we list that alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.

Reply in one hour

Can't find the exact configuration?

Tell us what you need and a scientist finds it for you, usually within the hour.

Last updated 19 October 2026