Memmert IF30 Forced Circulation Incubator 32L, 115V

Name: Memmert IF30 Forced Circulation Incubator 32L, 115V
Brand: Memmert
SKU: 27286
Price: 1855.31 EUR
Availability: InStock

NewMemmertIncubatorsUnited States

From€1,855.31excl. VAT

In stock

Can't find what you're looking for?

Setting Temperature Range: +20 to +80°C
Working Temperature Range: Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature): 0.1°C
Volume: 32 L (1.1 cu.ft.)
Temperature Sensor: 1 Pt100 sensor DIN class A in 4-wire-circuit

All 29 specifications

Ships to NL
Response within 1 hour
Warranty available. Buy without worry
Support from a scientist

Specifications 29

Brands: Memmert
New/Used: New
Setting Temperature Range: +20 to +80°C
Working Temperature Range: Min. 10°C above ambient up to +80°C
Setting Accuracy (temperature): 0.1°C
Volume: 32 L (1.1 cu.ft.)
Temperature Sensor: 1 Pt100 sensor DIN class A in 4-wire-circuit
Control Panel: ControlCOCKPIT: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Adjustable Parameters: Temperature (Celsius or Fahrenheit), fan speed, air flap position, program time, time zones, daylight savings time
Function SetpointWAIT: The process time does not start until the set temperature is reached
Language Setting: German/English/Spanish/French
Calibration: Three freely selectable temperature values
Fan: Forced air circulation by quiet air turbine, adjustable in 10% steps
Fresh Air Admixture: Adjustment of pre-heated fresh air admixture by air flap control in 10% steps

Vent: Vent connection with restrictor flap
Programming: AtmoCONTROL software for managing and organizing data via Ethernet, USB stick available as accessory
Documentation: Program stored in case of power failure
Temperature Control: Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Autodiagnostic System: For fault analysis
Door: Fully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Interior: Easy-to-clean stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Max. Number of Shelves: 3
Max. Loading Per Shelf: 44 lbs
Max. Loading of Chamber: 132 lbs
Interior Dimensions (WxHxD): 15.8” x 12.6” x 9.8” (40 x 32 x 25 cm)
Exterior Dimensions (WxHxD): 23” x 27.7” x 17.1” (58.5 x 70.4 x 43.4 cm)
Net Weight: Approx. 106 lbs
Electrical Data: 115 V, 50/60 Hz, approx. 800 W

Product description

Precise and uniform heating for varied lab uses, with advanced safety and control features.

Memmert IF30 Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above ambient up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features

Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient
Volume of 32 L (1.1 cu.ft.) with a reinforced stainless steel interior
ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time
Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture
Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880
Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides
Max. loading capacity of chamber is 132 lbs, with each shelf supporting up to 44 lbs

The Memmert IF30 Forced Circulation Incubator 32L, 115V is designed to deliver precise temperature control and uniform heating for a wide range of laboratory applications. With a setting temperature range from +20°C to +80°C and a working temperature range starting at 10°C above ambient, this incubator ensures reliable thermal processing. The 32L (1.1 cu.ft.) chamber, crafted from durable stainless steel with deep-drawn ribbing, is reinforced for easy cleaning and long-lasting durability. Equipped with the advanced ControlCOCKPIT, a multifunctional digital PID-microprocessor controller featuring a high-definition TFT-color display, users can easily adjust key parameters like temperature, fan speed, air flap position, and program time.

To enhance operational efficiency, the IF30 incubator features forced air circulation by a quiet air turbine, adjustable in 10% increments, with an option for pre-heated fresh air admixture. Safety is prioritized through an adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880. Additionally, the incubator’s maximum chamber load is 132 lbs, with each shelf capable of supporting up to 44 lbs, making it a robust and dependable choice for precise temperature-controlled applications.

INCLUDED: TheMemmert IF30 Forced Circulation Incubator 32L, 115V includes:

1 Stainless Steel Grid
Tilt Protection Wall Bracket
Calibration Certificate
Power Cord
Operator's Manual
Manufacturer's Documentation
3 Year Manufacturer's Warranty

€1,855 sits in the middle range incubators here. The middle half of the 948 with a price runs from €213 to €4,926.

Why Questpair exists

Lab equipment markets are fragmented. Buyers spend weeks calling distributors, comparing quotes, and verifying supplier reliability. Sellers struggle to reach global research labs.

We built Questpair to fix this. Every supplier on the platform is verified before listing. Every quote you receive comes from a real, vetted seller. AI prepares your case in minutes, then a real specialist takes over.

We're an independent team based in The Netherlands, working with research labs and procurement teams across Europe and worldwide.

Frequently asked questions

How long does laboratory equipment typically last?

With a service contract, ten to fifteen years is normal for most benchtop instruments. Detectors and pumps are the parts that wear first.

Can I get service for older equipment?

Often, yes. Verified suppliers frequently work with service partners converting the instrument. If applicable, we can list servicing options alongside the offer.

Where can I buy parts?

Ask a scientist through the request button. Parts are often available even when the instrument itself is discontinued.

What is the typical lead time for refurbished equipment?

Two to six weeks, depending on refurbishment scope and whether calibration is included.

Does laboratory equipment ship internationally?

We ship to 38 countries. Crating and customs handling are quoted with the instrument.