Boekel Scientific 240200 RapidFISH Slide Hybridization Oven, 115V

BINDER BF-115 incubator / drying oven with forced convection 100°C Model: BF115 Capacity: 115 liters (more) Temperature range: Room temperature plus 5 °C to 100 °C With forced ventilation Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 73 kg Tested at 37°C Year of manufacture: 2010

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V Temperature Range Ambie (more)nt +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 150L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 150L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-601 Programmable Energy Saving Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V Temperature Range Ambient +5°C to (more) 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V is expertly designed for effective drying and storage of lab instruments. It operates in the temperature range of room temperature plus 5°C to 70°C, utilizing natural convection. Key features include a large observation window for monitoring, adjustable feet for stability on uneven surfaces, and a stainless-steel interior that's both easy to clean and corrosion resistant. The oven is equipped with a stainless-steel pipe heater (1.0kW) and a water receiving plate at the bottom. Temperature control is managed by a PID controller with a microprocessor, allowing precise settings via digital ▲/▼ keys. It includes a K thermocouple temperature sensor and liquid-expansion temperature controller for overheat protection. Safety and usability are enhanced with a silicon rubber-packed single door and a standard 3mm glass observation window measuring 250x300mm. The oven offers a shelf plate load capacity of 15kg and has 10 shelf rest steps with a 30mm pitch. Weighing approximately 45kg, its internal dimensions are 450×450×450 mm, and external dimensions are 504×562×788 mm. The DG-400C is an excellent choice for laboratories needing a reliable and efficient solution for drying glassware and other instruments. INCLUDED: The Yamato DG-400C Natural Convection Glassware Drying Oven 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF160 Forced Circulation Oven 161L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 161 L (5.69 cu.ft.) Features - Spacious internal volume of 161 L to ensure functionality across a variety of applications - Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF160 Forced Circulation Oven 161L, 115V offers precision and reliability for your most demanding heating applications. Featuring a setting temperature range of +20 to +300°C and a working temperature range that of 10°C above ambient up to +300°C, this oven is designed to meet a variety of laboratory needs. The state-of-the-art ControlCOCKPIT provides an adaptive multifunctional digital PID-microprocessor controller with a high-definition TFT-color display, ensuring easy monitoring and precise temperature management. Safety and efficiency are at the forefront with the Memmert UF160. It includes an adjustable electronic overtemperature monitor and a mechanical temperature limiter to prevent overheating, safeguarding both the oven and its contents. The interior, crafted from easy-to-clean stainless steel and featuring integrated heating on four sides, maximizes heat distribution and retention. Additionally, the oven's forced air circulation system, adjustable in 10% steps, optimizes the internal environment, while the fully insulated stainless steel doors with two-point locking enhance thermal efficiency and security. INCLUDED: TheMemmert UF160 Forced Circulation Oven 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The new DynaMag-50 magnet is optimized for efficient cell isolation using Dynabeads. The DynaMag-50  (more)magnet combines a strong magnetic attraction for efficient separations with a flexible and smart ergonomic design that ensures a comfortable working position. A tilting mechanism on the magnet enables you to rest your elbows while pipetting. The magnet can be used for any starting sample in combination with all types of cell-isolation Dynabeads. Optimal working volume: 5–50 ml Magnet holds 2 x 50 ml tubes Excellent control and visibility of your isolations

Memmert WTB50 Digital Water Bath 51L, 115V Volume 51 L Working Temperature Range +5 above ambient t (more)o +100 °C Setting Accuracy 0.1°C Features - Precise temperature control with a working range from 5°C above ambient up to +100°C ensures consistent results - Highly accurate settings with 0.1°C precision for optimal temperature management - spacious 51-liter capacity designed to handle a wide range of applications - Durable, corrosion-resistant stainless steel construction guarantees long-lasting performance - Effortless operation with an intuitive 3.5" color touch screen for quick adjustments - Advanced two-stage safety system prevents overtemperature, protecting your valuable samples - Autodiagnostic system with built-in fault detection keeps your process running smoothly - Easy-to-clean deep-drawn stainless steel tray with central drain minimizes maintenance time The Memmert WTB50 Digital Water Bath 51L, 115V offers precise temperature control with a working range from 5°C above ambient up to +100°C, ensuring accurate and reliable performance across various applications. Its spacious 51-liter capacity makes it ideal for larger tasks, while its stainless steel construction ensures durability and corrosion resistance. With a setting accuracy of 0.1°C, users can confidently manage temperature-sensitive processes. The water bath's 3.5" color touch screen provides intuitive operation, allowing for quick adjustments to maintain optimal conditions. For added safety, the Memmert WTB50 features a two-stage overtemperature protection system, including a pressure sensor for level monitoring and a thermal fuse for automatic heating shutdown in case of an error. The built-in autodiagnostic system with fault detection keeps processes running smoothly. Maintenance is simple, thanks to the easy-to-clean deep-drawn stainless steel tray with a central drain. Additionally, a digital timer and independent temperature limiter further enhance control and operational safety. INCLUDED: The Memmert WTB50 Digital Water Bath 51L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA T25 digital package Speed Range 3,000 to 25,000 RPM Viscosity max. 5,000 mPas Volume range (H2O) (more) 0.001 - 2 l Features - High-performance dispersing instrument suitable for volumes from 1 to 2000 ml (H2O) - Compatible with a wide range of dispersing elements for applications such as homogenizing wastewater samples, laboratory reactor dispersion, vacuum/pressure tasks, and medical research sample preparation. - Features a digital speed display for precise control - Electronic speed control and electronic overload protection ensure reliable and safe operation - Plastic disposable dispersing elements available in two sizes for convenience and efficiency - Error code display for troubleshooting and maintenance - Stepless speed adjustment and LED speed display for user-friendly operation High-performance dispersing instrument for volumes from 1 – 2000 ml (H2O) with digital speed display. It offers a wide speed range from 3000 – 25,000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements adds versatility. Applications ranges from homogenizing waste water samples, use in laboratory reactors, dispersion tasks under vacuum / pressure and sample preparation in medical research.INCLUDED: The IKA T25 digital package includes: - T 25 digital ULTRA-TURRAX® - S 25 N - 18 G Dispersing tool - R 1826 Plate stand - R 182 Boss head clamp - RH 3 Strap clamp - Manufacturer's Documentation - 2 Year Manufacturer's Warranty