BIO-RAD Bio-Plex System, Luminex XYP & Luminex 100 Multiplex Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. All wide Mini-Sub Cell GT Systems accommodate ReadyAgarose Precast Gels to save time and allow highly reproducible separations. The cells include a buffer tank, a safety lid with cables, and a leveling bubble. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (WxL): 150 x 70 mm ReadyAgarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

Dock for the FlashGel electrophoresis system.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41029 Box of glass test tubesITEM-24612 Boxed BOC Lab Series 8500 Multi Stage Co2 RegulatorITEM-41030 10 X Boxes 5ml reaction vesselsITEM-24613 Electrophoresis X cell sure lock casingITEM-24605 NTC Oxygen RegulatorITEM-24607 NTC Oxygen RegulatorITEM-24608 BOC Special Gases RegulatorITEM-24606 NTC Oxygen RegulatorITEM-24604 BOC Multi stage regulatorITEM-24609 GA SSO4 Oxygen RegulatorITEM-24610 GA SSO4 Oxygen RegulatorITEM-24614 Vollrath Water BathITEM-41511 Electrophoresis tanksITEM-24583 Box of RegulatorsITEM-24611 Bibby Hotplate StirrerITEM-24584 Box of regulatorsITEM-41512 Sala PulleyITEM-41513 FLEXILUX 300 & 600 Longlife unitsITEM-24587 MSE Micro Centaur PlusITEM-41514 IKA Vibramax VXRITEM-41515 IKA VIBRAMAX VXR BASICITEM-24585 MVD CCD video cameraITEM-41516 Box of electrophoresis tanksITEM-24586 Sanyo Digital CCD cameraITEM-41517 LKB 2197 Power supplyITEM-41518 Techne DB3ITEM-21720 Airflow TA 2 Anemometer ( in case)ITEM-21722 Edwards Pirani 11 GaugeITEM-21729 Edwards Monitorr 101 Edwards Penning 8ITEM-21731 New Brunswick Co2 LN2 Back up ModuleITEM-21718 BOC Nitrogen 300 bar InletITEM-21725 Genevac Pirani GaugeITEM-21728 WPI Nanoliter GaugeITEM-21724 Edwards Pirani 11 GaugeITEM-21733 Chell PDR-D-1 Pressure ReadoutITEM-21714 Freshford 230 bar inletITEM-21727 SGT Charcoal FilterITEM-21716 Boc HiQ InletITEM-21715 Freshford 300 bar inletITEM-41519 Grant Water BathITEM-41520 B&T Heater StirrerITEM-37162 Grant Water BathITEM-37163 ISOTECH IGC2231ITEM-21734 8x Mass Flow ControllersITEM-37164 Box of electrophoresisITEM-21732 Peak Scientific 12x SolenoidsITEM-37166 Prior microscopeITEM-37167 Nikon MicroscopeITEM-37168 Olympus MicroscopeITEM-37169 Electrophoresis Hood

Hoefer SE640 Wide-Mini Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Sizes (W  (more)x H) 18 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Maximum glass plate size 18 x 8 cm - Permits rapid screening of up to 112 samples at one time - Design permits gels to be surrounded uniformly by buffer so heat dissipation is efficient. - Bands are sharp and lanes are straight - Accommodates denaturing or native polyacrylamide gels - Run up to four second dimension gels using IEF strips or tube gels The Hoefer SE640 Wide-Mini Vertical Protein Electrophoresis Basic Unit is a specialized, high-capacity system designed to accommodate up to 112 samples in a compact format. This extra-wide unit supports glass plates up to 18 x 8 cm, allowing for efficient and rapid screening of multiple samples simultaneously. The SE640’s design ensures gels are uniformly surrounded by buffer, providing optimal heat dissipation and resulting in straight lanes and sharp, well-defined bands. Suitable for both denaturing and native polyacrylamide gels, this unit also supports running up to four second-dimension gels using IEF strips or tube gels, adding flexibility for advanced applications. The SE640’s user-friendly assembly and customizable configuration options make it an ideal choice for high-throughput labs focused on consistency and precision. Operating smoothly in standard laboratory conditions, it handles temperatures up to 45°C and humidity up to 80%, while offering power settings up to 1000 V and 500 mA to meet diverse experimental needs. With a broad selection of compatible accessories, labs can easily tailor this unit to meet specific research requirements. Please note, the dropdown menu allows selection of a complete package based on preferred spacer accessory (0.75 mm, 1.0 mm, or 1.5 mm), which includes the following products: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid with High Voltage Leads - Glass Plates 18 x 8 cm, 6 pcs - 8 cm Clamp Assemblies, 4 pcs - Cams, 6 pcs - Dual Casting Stand with Leveling Base - Laminated Gaskets for Casting Stand, 2 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Buffer Dam - Spacer-Mate Alignment Template - Wonder Wedge Plate Separation Tool - Gel Seal - Bubble Level - Combs, 15-well, 1.5 mm thick, 2 pcs - 1.5 mm Thick Spacers, 2 cm wide, 4 pcs INCLUDED: The Hoefer SE640 Wide-Mini Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber - Upper Buffer Chamber - Safety Lid with High Voltage Leads - Glass Plates 18 x 8 cm, 6 pcs - 8 cm Clamp Assemblies, 4 pcs - Cams, 6 pcs - Dual Casting Stand with Leveling Base - Laminated Gaskets for Casting Stand, 2 pcs - Slotted Gaskets for Upper Buffer Chamber, 2 pcs - Buffer Dam - Wonder Wedge Plate Separation Tool - Gel Seal - Bubble Level - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit Compatible Glass Plate Si (more)zes (W x H) 10 x 10.5 cm or 10 x 8 cm Maximum Power Settings 1000 V, 500 mA, 50 W Compatible Spacers 0.75 mm, 1.0 mm, 1.5 mm Features - Quick, excellent results using minimal buffer - Passive cooling produces gels with straight lanes and sharp bands - Cast your own or use precast gels from a variety of manufacturers - Transfer up to 4 gels in 45 minutes with only 300 ml buffer using optional SE302 Blot Modules - Designed for use with a wide variety of precast gels The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit is a reliable and compact solution for vertical protein electrophoresis and blotting applications. This sturdy system is designed for optimal performance, delivering quick, high-quality results with minimal buffer use. The SE300 miniVE features passive cooling that produces straight lanes and sharp bands, ensuring consistency and precision in protein analysis. It is compatible with a wide range of precast gels from various manufacturers, providing flexibility for different lab needs. The SE300 miniVE Basic Unit includes essential components such as the lower buffer chamber and gel modules with gaskets, making it ready for immediate use. The unit supports glass plates up to 10 x 10.5 cm or 10 x 8 cm and operates at maximum power settings of 1000 V, 500 mA, and 50 W. With user-friendly assembly and robust construction, the SE300 miniVE Basic Unit is an excellent addition to any lab focused on efficient protein separation and blotting. Please note: Glass plates, T-Spacers, and SE211A combs are not included and can be purchased separately. INCLUDED: The Hoefer SE300 miniVE Integrated Vertical Protein Electrophoresis Basic Unit includes: - Lower Buffer Chamber (tank) - Gel Modules with Gaskets, 2 assemblies - Safety Lid with High Voltage Leads - Well-Locating Decals, 2 pcs - Wonder Wedge Plate Separation Tool - Gel Seal - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2005 Tested at 37 ° C and -2 ° C light friction at the stainless steel hooks when closing the door

Jeol JEM-1200 EX Pump and Pressure Tank This was removed from a university lab where it was surplus  (more)to requirements. The unit has not been tested. It is in good cosmetic condition with marks from use.

Agilent Technologies IDP3 Dry Scroll Vacuum Pump This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and draws suction. It is in good cosmetic condition with minor marks. Model - IDP-3Model no. IDP3A01SN - MY17190036Hours - 218.4

A&D Weighing Apollo GX-124A Analytical Balance, 120 g, 0.1 mg Capacity 120 g Readability 0.0001 (more) g Repeatability 0.0001 g Features - Increase productivity with 1.5 second stabilization time using Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-124A Analytical Balance, 120 g, 0.1 mg, delivers exceptional precision in measurement tasks, enhanced by its Smart SHS technology that accelerates the stabilization time to just 1.5 seconds. This balance efficiently conducts repeatability testing and precision checks internally without the need for external weights, courtesy of its Electronically Controlled Load (ECL) management. This feature not only improves workflow efficiency but also ensures compliance with USP41 by minimizing sample sizes, thereby reducing waste and maximizing resource use. The balance's robust design includes impact shock detection and overload protection, safeguarding the device against potential damage and ensuring consistent performance over time. Designed for simplicity and operational efficiency, the Apollo GX-124A features an intuitive interface with six easy-to-use keys and a quick toggle that allows for seamless switching between USB and RS-232C communications. This makes it adaptable to a variety of laboratory data management systems. The balance is also equipped with a brightly illuminated, front-mounted level indicator, ensuring it can be easily and accurately leveled, even when operators are wearing gloves. The A&D Weighing Apollo GX-124A supports a broad spectrum of scientific applications with its extensive range of measurement units, including mg, g, oz, ozt, ct, mom, dwt, gr, pcs (counting), % (percent mode), and SG (density mode), enhancing its versatility in various laboratory settings. Automatic self-calibration and an option for one-touch internal/external calibration maintain the balance's accuracy and reliability. Built to withstand the demands of high-throughput environments, this analytical balance combines precision, ease of use, and a durable construction to meet the rigorous standards required by professionals in the field. Backed by a five-year warranty, it delivers both quality and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-124A Analytical Balance, 120 g, 0.1 mg includes: - External Key Jack - Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Corepoint Scientific PRF122WWW-0A Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Fr (more)eezer Temperature Setpoint Range Refrigerator: 1°C to 10°C / Freezer: -15°C to -25°C Capacity Refrigerator: 10.5 cu. ft. / Freezer: 1.3 cu. ft. Defrost Method Refrigerator: Cycle / Freezer: Auto Features - Compact, space-saving design with freestanding refrigerator and auto defrost freezer combo - Separate microprocessor temperature controllers and digital displays for precise temperature management - Six adjustable refrigerator shelves and two adjustable freezer shelves with guard rails - Auto defrost cycle for the freezer every 6 hours for optimal temperature maintenance - Audible and visual high/low temperature alarms with remote alarm contacts - Keyed door locks, magnetic door gaskets, and integrated door handles for enhanced security - Environmentally friendly HFC-free refrigerant (R600a) and foam insulation - Stacking kit and leveling legs included for flexible placement and stability - Forced draft circulation in the refrigerator for consistent cooling The Corepoint Scientific PRF122WWW-0A Solid Door Laboratory Combo features a versatile 1°C to 10°C refrigerator and -15°C to -25°C auto defrost freezer in a compact, space-saving design. This freestanding unit has separate microprocessor temperature controllers and digital displays for precise temperature management. With a 12 cu. ft. capacity (10.5 cu. ft. refrigerator, 1.3 cu. ft. freezer), it includes six adjustable shelves in the refrigerator and two in the freezer, all equipped with guard rails to prevent items from being pushed against the back wall. The unit is equipped with audible and visual alarms, remote alarm contacts, and a sample-simulated temperature probe. The auto defrost cycle occurs every 6 hours, ensuring optimal temperature maintenance. Additional features include keyed door locks, magnetic door gaskets, integrated door handles, leveling legs, stacking kit, two probe access ports, and environmentally friendly HFC-free refrigerant (R600a). This combo unit maximizes facility floor space while reducing long-term maintenance costs. INCLUDED: The Corepoint Scientific PRF122WWW-0A Solid Door Laboratory Combo 1C to 10C Refrigerator/-15C to -25C Freezer includes: - Stacking Kit - Leveling Legs - Keys for Door Locks - 6 x Adjustable Shelves for Refrigerator - 2 x Adjustable Shelves for Freezer - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty